Year-end Sale % OFF 
Abstract
A comparative study of the performance characteristics of a printed 8-element V-shaped circular antenna array and an 8-element Yagi circular array operating at 2.45 GHz for vehicular direction finding applications is presented. Two operating modes are investigated; switched and phased modes. The arrays were fabricated on FR-4 substrates with 0.8 mm thickness. Measured and simulated results were compared. Radiation gain patterns were measured on a 1 m diameter ground plane that resembles the rooftop of a vehicle. The HPBW of the Yagi was found to be about 3° narrower than its V-shaped counterpart when measured above a reflecting ground plane and operated in switched mode. The printed V-shaped antenna array offers 2.5 dB extra gain compared to the printed Yagi array.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
