Abstract

In this work, a compact diplexer to separate GSM (global system for mobile) from CDMA (code division multiple access) band has been presented using a LTCC (low temp. co-fired ceramic) multi-layer technology. In order to achieve high selectivity of the bands, a shunt capacitor and inductor are designed in the high-pass filter (HPF) and low-pass filter (LPF), respectively. A transmission zero is designed at the stopband of the LPF using a shunt inductor for improving isolation characteristics. The diplexer is realized in a 6-layer LTCC substrate with a relative dielectric constant of 7. The size of the fabricated diplexer including CPW pads is 3.45 × 4.0 × 0.7 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> . An insertion loss (IL) and return loss (RL) of the GSM band are less than -0.54 dB and -10.50 dB, respectively. In the case of CDMA band, the IL of -1.13 dB and RL of below -6.16 dB are archived.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.