Abstract

This paper presents a compact quadrature coupler with a tunable frequency and power-dividing ratio. Wide tunable frequency and power-dividing ratio are achieved by using the novel tunable unit instead of the transmission line sections in a traditional varactor-based quadrature coupler. Closed-form equations are derived for design parameters. For verification, a quadrature coupler is designed based on the given parameters, which demonstrate the tunable frequency of 2.0 GHz to 6.0 GHz and the tunable power-dividing ratio of -20 dB to 7.2 dB at 3 GHz. Finally, a microstrip tunable quadrature coupler is fabricated and measured. The measurements agree well with simulations. Under the frequency-tunable state, the measured 3-dB working frequency of this coupler can be continuously adjusted from 2.0 GHz to 4.7 GHz. And during the adjustment process, the return loss and isolation are always >15 dB. In the power-dividing ratio-tunable state, the adjustment range of the measured power-dividing ratio is from -14 to 6.0 dB at 3 GHz. Moreover, the return loss and isolation are always maintained at >20 dB.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.