Abstract
A high-efficiency and high-power vertical-cavity surface-emitting laser (VCSEL) side-pumped rod Nd:YAG laser with temperature adaptability are demonstrated. The VCSEL side-pumped laser module is designed and optimized. Five VCSEL arrays are symmetrically located around the laser rod and a large size diffused reflection chamber is designed to ensure a uniform pump distribution. Furthermore, the absorbed pump power distribution of the rod is simulated to verify the uniformity of the pump absorption. Finally, a proof-of-principle experiment is performed in short linear cavity laser with single laser module. A continuous-wave output power of 658 W at 1064 nm is obtained, the corresponding optical-to-optical efficiency is 52.6%, and the power variations are ±0.7% over 400 s and ±3.1% over the temperature range from 16 °C to 26 °C. To the best of our knowledge, this is the highest output power and the highest optical-to-optical efficiency ever reported for VCSEL pumped solid-state lasers. By inserting a telescopic module into the cavity and optimizing the TEM00 mode volume, the average beam quality is measured to be M 2 = 1.34 under an output power of 102 W. The experimental results reveal that such a high power rod laser module with temperature stability is appropriate for field applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.