A 3-D numerical prediction of turbulent flow, heat transfer and solidification in a continuous slab caster for steel

Abstract

This study describes the numerical modeling of three-dimensional coupled turbulent flow, heat transfer, and solidification in a continuous slab caster for stainless steel. The model uses generalized transport equations which are applicable to the liquid, mushy and solid regions within the caster. The turbulent characteristics in the melt pool and mushy region are accounted for using the low-Reynolds number k– ε turbulence model by Launder and Sharma. This version of the low-Reynolds number turbulence model is found to be more easily adaptable to the coupled flow and mushy region solidification caster problem compared to the standard high-Reynolds number and other low-Reynolds number turbulence models. The macroscopic solidification process itself is based on the enthalpy-porosity scheme. The governing transport equations are solved employing the primitive variables and using the control volume based finite-difference scheme on a staggered grid. The process variables considered are the casting speed and the inlet superheat of the melt. The effects of these process variables on the velocity and temperature distributions and on the extent of the solidification and mushy regions are reported and discussed. The numerical predictions of solidification profile are compared with the limited experimental data available in the literature, and very good agreement was found.