Abstract
Hermetic reciprocating compressors consume the most electricity, and an improvement in compressor performance has a direct impact on compressor efficiency. Valve motion and pressure pulsation should be precisely predicted to assess the thermodynamic performance. In this paper, a three-dimensional fluid-structure interaction model validated by experiments is developed to investigate the oscillation motion of the suction and discharge reed valves, compression power, and mass flow rate of a hermetic reciprocating compressor operating under ASHRAE (54.4 °C/-23.3 °C) at the speed of 2100 rpm and additional specific refrigerator operating conditions such as (25 °C/-20 °C) and (40 °C/-25 °C) at the speeds of 1300 and 1600 rpms, respectively. Different from the others, no prior study has explored the whole compression cycle, including all four essential phases by showing the compressor's pV and valve oscillation diagrams under these operating conditions. In addition, the advanced mesh refinement method is computationally straightforward and has excellent numerical stability. Using this method as the third one in the literature, the mesh structure of complex geometries is generated without additional time or effort. Thus, the development of the model and the solution takes significantly less time than with other methods. When the obtained numerical outputs using the RNG k-ε turbulence model and experimental data are compared, the turbulence model is found to be reliable in the prediction of thermodynamic performance and valve lift. The deviations between experimental and numerical outcomes are 1.79%, -0.6%, and 3.44% for compression power and -1.28%, 0.6%, and 2.44% for mass flow rate regarding ASHRAE and additional operating conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.