Abstract
A novel PVT (process, voltage, temperature) detection and compensation technique is proposed to automatically adjust the slew rate of a 2×VDD output buffer. The threshold voltage (Vth) of PMOSs and NMOSs varying with process, supply voltage, and temperature (PVT) is detected, respectively. Based on the detected PVT corner, the output buffer will turn on different current paths correspondingly to either increase or decrease the output driving current such that the slew rate of the output can be adjusted as well. The proposed design is implemented using a typical 90nm CMOS process to justify the slew rate performance. By the on-silicon measurements, the slew rate of output signal is compensated over 26%, the maximum slew rate is 1.65 (V/ns), the maximum data rate is 330MHz given 1.2/0.9V supply voltage with a 20pF load, the core area of the proposed design is 0.056×0.406mm2, and the power consumption is 2.2mW at 330MHz data rate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
