A 14-bit 1-MS/s SAR ADC with a segmented capacitor array and background mismatch calibration for IoT sensing applications

Abstract

A 14-bit 1-MS/s successive-approximation-register (SAR) analog-to-digital converter (ADC) for IoT sensing devices is proposed. With a VCM-based switching scheme, the 14-bit SAR ADC can lower 68.7 % switching energy consumption and 97.9 % capacitor array area by utilizing a segmented capacitor array compared to the conventional binary capacitor array. Although the root-mean-square integral nonlinearity (INL) and differential nonlinearity (DNL) of the segmented capacitor array is decreased compared with the binary capacitor array at the capacitance mismatch of 1 %, the capacitor mismatch can be background calibrated and the power consumption of the digital calibration circuit is increased by only 55.4 μW under the identical calibration step condition, and there is no noticeable deterioration in the calibration speed, resulting in a significant improvement in power efficiency. In addition, a voltage-controlled oscillator (VCO)-based comparator based on the reset-in-time technique and the adaptive stage adjustment technique is employed to further reduce power consumption. Post-simulation results show that the proposed 14-bit prototype SAR ADC can enhance the signal-to-noise distortion ratio (SNDR) and spurious-free dynamic range (SFDR) by 13.35 dB and 16.72 dB respectively at a Nyquist input rate and a sampling rate of 1-MS/s. With a power supply of 1.8 V, the power consumption is 597.8 μW with a figure of merit (FoM) value of 83.3 fJ/Conv.-step in a 0.18-μm CMOS process. The total area is 0.208 mm2, of which the analog part is only 0.038 mm2.