Abstract
A fully integrated 10-Gb/s optical receiver analog front-end (AFE) design that includes a transimpedance amplifier (TIA) and a limiting amplifier (LA) is demonstrated to require less chip area and is suitable for both low-cost and low-voltage applications. The AFE is stimulation using a 0.18μm CMOS process. In order to avoid off-chip noise interference, the TIA and LA are dc-coupled on the chip instead of ac-coupled though a large external capacitor. The tiny photo current received by the receiver AFE is amplified to voltage swing of 400. The results indicate that, with a photodiode parasitic capacitance of 500fF and the bonding pad parasitic capacitance of 200fF between which a 2-mm bond wire is inserted at the input node, the AFE provides a conversion gain of up to 89.21 dB and 3 dB bandwidth of 9.78 GHz. Operating under a 1.8V supply, circuit power dissipation is 95 mW and its sensitivity is 18.5μA for BER of 10-12
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.