Abstract

This paper presents a fully integrated CMOS humidity sensor for a smart RFID sensor platform. The sensing element is a CMOS-compatible capacitive humidity sensor, which consists of top-metal finger-structure electrodes covered by a humidity-sensitive polyimide layer. Its humidity-sensitive capacitance is digitized by an energy-efficient capacitance-to-digital converter (CDC) based on a third-order delta-sigma modulator. This CDC employs current-efficient operational transconductance amplifiers based on current-starved cascoded inverters, whose limited output swing is accommodated by employing a feedforward loop-filter topology. A programmable offset capacitor is included to remove the sensor's baseline capacitance and thus reduce the required dynamic range. To reduce offset errors due to charge injection of the switches, the entire system is auto-zeroed. The proposed humidity sensor has been realized in a 0.16- μm CMOS technology. Measurement results show that the CDC performs a 12.5-bit capacitance-to-digital conversion in a measurement time of 0.8 ms, while consuming only 8.6 μA from a 1.2-V supply. This corresponds to a state-of-the-art figure-of-merit of 1.4 pJ/conversion-step. Combined with the co-integrated humidity sensing element, it provides a resolution of 0.05% RH in the range from 30% RH to 100% RH while consuming only 8.3 nJ per measurement, which is an order-of-magnitude less energy than the state-of-the-art.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.