Abstract
We have fabricated several 50 omega characteristic impedance low-pass metal powder filters. The filters are made with bronze or copper metal powder with varying amounts of metal powder in a metal powder/epoxy mixture. Our goal is to make a filter with a characteristic impedance Z = 50 omega at frequencies up to 10 GHz. Using a 78% bronze powder/epoxy mixture in a suitable geometry, we achieved an impedance Z = 54 omega at 4.2 K, with a cutoff frequency fc approximately/= 0.3 GHz and an attenuation A = Vout/Vin=0.0001 (-80 dB) at 10 GHz. We also made several non-50 omega low-pass bronze powder filters with fc = 1 MHz and A = 0.0001 at 10 MHz. Fabrication details and performance data will be presented for both types of filter.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
