3D dynamic model empowering the knowledge of the decontamination mechanisms and controlling the complex remediation strategy of a contaminated industrial site

Abstract

Knowledge of the geology and hydrogeology of the polluted site emblematize a key requirement for environmental remediation, through assembling and synthesizing findings from various sources of physical evidence. In an increasingly virtual era, digital and geo-referenced metadata may serve as tools for collecting, merging, matching, and understanding multi-source information. The main goal of this paper is to emphasize the significance of a 3D hydrogeochemical model to the portrayal and the understanding of contamination dynamics and decontamination mechanisms at a highly contaminated industrial site. Some remediation measures are active on-site, due to the evidence-based presence of chlorinated solvents in groundwater. These are attributable to a slow-release source of pollutants in the saturated zone associated with very low permeability sediments. Therefore, in this research, a new technique for the remediation of secondary sources of dense non-aqueous phase liquid (DNAPL) contamination was investigated for the first time on a full-scale application. The combination of groundwater circulation wells (IEG-GCW®) and a continuous electron donor production device was set up to boost in situ bioremediation (ISB). A multi-phase approach was followed handling and releasing data during various remediation stages, from site characterization via pilot testing to full-scale remediation, thus allowing users to monitor, analyze, and manipulate information in 3D space-time. Multi-source and multi-temporal scenarios reveal the impact of ongoing hydraulic dynamics and depict the decontamination mechanisms in response to the interventions implemented over time, by quantifying the overall performance of the adopted strategies in terms of removal of secondary sources of pollution still active at the site.