Abstract
Three-dimensional (3D) characterization of variations in crystallography and chemistry of nanostructured metals will provide vital information to understand their mechanical and thermal behaviours. This study applied a surface sliding friction treatment (SSFT) at liquid nitrogen temperature to produce nanostructured surface layers in a peak-aged Al-Cu-Mg alloy. The nanostructured surface was characterized by means of 3D orientation mapping in the transmission electron microscope (3D-OMiTEM) and atom probe tomography (APT). 3D-OMiTEM results revealed a lamellar structure with an average lamellar boundary spacing of 26 nm at the topmost surface layer (depth < 20 μm), which is much finer than normally achievable in commercial purity Al deformed to high strain levels. Based on the 3D-OMiTEM data, a five-parameter grain boundary character analysis was carried out. It was found that low angle grain boundaries dominate the nanoscale structure and that the grain boundary plane distribution of high angle lamellar grain boundaries shows a preference around {101}. APT analysis showed segregation of Cu and Mg atoms at lamellar boundaries, which is believed to play a role in stabilizing the boundaries and enhancing the structural refinement during SSFT.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
