Abstract
Fused Filament Fabrication (FFF) technology is used to create metal parts in this paper. A binder formula is developed for 316L stainless steel powder, composed of polypropylene (PP), styrene ethylene butylene styrene (SEBS) and paraffin wax (PW). The binder is mixed with the 316L stainless steel powder to produce mixture which is then extruded into filament. The optimum binder formula, PP:SEBS:PW = 5:2:2, is obtained by orthogonal experiment. After optimization, mixture viscosity is reduced, filament tensile strength is guaranteed, rigidity is improved. The filament can be printed by a desktop FFF printer to obtain green parts. Binder within the green parts can be sufficiently removed by solvent and thermal debinding, and the shape of printed parts can be maintained well. After sintering, shrunken 316L stainless steel parts can be created, some pores distributed inside. With finer metal powder, the relative density of sintered part can be increased to 96%. The research ideas of this paper can provide effective methods for the development and optimization of binder.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
