Abstract
AbstractInclined high pH stress corrosion cracking (SCC) is a type of intergranular environmental cracking in gas pipelines, which differs from typical SCC by propagating at an angle from the wall direction. Investigations of Australian and Canadian inclined SCC colonies have not provided a clear indicator of a cause for the abnormal crack growth direction. This paper addresses the possibility of crack tip strain enhanced electrochemistry causing the inclination. Potentiodynamic tests were conducted to quantify the influence of strain on the electrochemistry, and strain was found to increase current density up to 300% in the SCC region. A model was developed that incorporates crack tip strain driven SCC growth, which showed good agreement with field grown cracks, and the aspect ratio of the grains was shown to have an effect on the inclination angle. The results indicate that crack tip strain enhanced electrochemistry is a plausible cause for inclined SCC.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Fatigue & Fracture of Engineering Materials & Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
