福島第一原子力発電所1号機事故の熱流動現象推定（熱力学モデルによる非常用凝縮器（IC）の挙動）

Abstract

In order to investigate the process of accident of Fukushima Nuclear Power Plants, an accident scenario of Fukushima Daiichi Nuclear Power Plant, Unit 1 is analyzed from the data open to the public. Phase equilibrium process model and adiabatic expansion model were introduced. Original data reported in the first stage of the accident were examined to clarify the behavior of the isolation condensers (ICs) which are generally believed unfunctional after the arrival of Tsunami and station blackout. The original data and observation reports verified that the so called “fail safe” system to close the valves in IC did not work properly due to the shutdown of AC power. The reports also showed the evidence that the operators injected water to the storage tank of IC. We proposed a scenario that IC was operational until approximately at 3/12 3:00, small leakage occurred at the reactor pressure vessel (RPV) at the initial stage of the accident, the RPV ruptured at 3/12 6:20, and it ruptured again in approximately at 3/12 16:00. We assumed that PCV ruptured at 3/12 3:00, and the area of rupture did not change after the hydrogen explosion occurred at 3/12 15:36. The present analysis model describes the data measured at the accident, and many evidences and witnesses reported at the early stage of the accident. We also simulated according to the scenario of Tokyo Electric Power Company (TEPCO) that the ICs did not work after the Tsunami arrival. The estimation by the present analysis agrees with the TEPCO's one, however, there are many discrepancies that cannot explain the behavior of the reactor accident.