Abstract
Electromagnetic optical scanning mirrors for both horizontal and vertical scanning of a Laser Projection Display have been proposed. Electromagnetic actuation is selected because of the millimeter-sized mirror. For low cost reason, the glass and PMMA films are respectively used as the main structure of horizontal and vertical scanning mirrors. A mathematical model considering the operation frequency of the Laser Projection Display has been derived to fast design the geometry of the scanning mirror. In order to machine scanning mirrors with high quality geometry, the 193 nm excimer laser is used as the major machine tool. Different control circuits have been developed to control both horizontal and vertical scanning. The scanning frequencies, 4.15 kHz and 260 Hz respectively for horizontal and vertical scanning mirrors, have been measured by laser Doppler vibrometer. Comparing to other optical scanners, 193 nm excimer laser machined optical scanning mirrors have advantages in low cost and easy to fabricate. In this paper, a Laser Projection Display consisting of the horizontal and vertical scanning mirrors has also been built to show the application potential. A 2-D single color image with resolution of 46 × 32 pixels, 4.15 kHz of horizontal scanning frequency and 60Hz of regulated vertical scanning frequency has been demonstrated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.