Abstract

A wideband Low Noise Amplifier (LNA) is demonstrated by using the inductively degenerated LNA architecture. This wideband operates in range of 1.575 GHz to 2.48 GHz frequency band. The design of the LNA utilizes the Power Constraint Noise Optimization (PCNO) technique in determining the device size. The simulation results achieved the maximum power gain S 21 at 13.7 dB to 10.3 dB, input reflection coefficient S 11 at −7.2 dB to −9.5 dB, output reflection coefficient S 22 at −17 dB to −10 dB, reverse isolation S 12 at −54.4 dB to −52.1 dB and noise figure (NF) at 2.31 dB to 3.12 dB in the frequency range. Linearity result is based on the Input Third-Order Intercept Point (IIP3) is −5.48 dBm. The design draws and obtained at low total power consumption at 14.4 mW and all results met specification. The design was implemented in 0.18 µm CMOS technology. The performances obtained are from the LNA with on-chip matching circuitries.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.