Abstract
Capacitance type void fraction sensors for cryogenic fluid has been developed by our research group. The sensors are roughly categorized into three types; arc type, small-sized arc type, and asymmetric type. In this paper, the three type sensors are compared, and each sensor's merits and demerits are indicated. The arc type sensor was first developed. The sensor is simple, but S/N ration is low and influence of "temperature drift" is large. The small-sized arc type sensor was developed for the sounding rocket S310 test No.43, so the sensor was needed to make as small as possible. The sensor succeeded to measure the void fraction of the liquid nitrogen flow even under microgravity. The asymmetric type sensor was deviced to improve the measurement accuracy. Inaccuracy of the sensor between true void fraction and measured void fraction was only 3% for stratified flow, whereas that of the arc type sensor 30%.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The Proceedings of the Fluids engineering conference
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
