Abstract
A project of metal hydride hydrogen compressor is presented, which can be used as an element of refueling complexes, hydrogen storage and compression systems. The capacity of the developed sample is 40 kg of hydrogen, the mass is 4,8 ton, and the maximum compression pressure is 15 MPa. The base metal hydride material on the basis of which this compressor battery model is developed is LaNi4.5Al0.5. the sorption capacity of hydrogen of which is determined experimentally, and is at least 1.38 % by weight. A feature of the developed compressor battery is the use of air cooling, the presence of an automatic monitoring and control system, I allow a number of operations to be performed in automatic mode, and the use of software, electrical and automatic protection against overpressure. Each accumulator-compressor is made in the form of a steel box in which six blocks (capsules) are placed. The block, respectively, is made in the form of a steel coaxial multilayer cylinder, on the outer side of which there is a heating element and a layer of thermal insulation. In the middle of the cylinder is a sealed capsule filled with metal hydride material. Capsules are interconnected with the collector through a piping system. Also, the piping system is equipped with an inlet valve connecting the volume formed with an external receiver. The battery-compressor is equipped with an external receiver, to which a hydrogen, vacuum, nutrient and consumable outline is connected. Each circuit is equipped with an electromagnetic valve, as well as measuring devices, which makes it possible to carry out automatic control of parameters and automatic control of the device in accordance with the operating mode. A list of equipment is presented, on the basis of which a system of automatic control and monitoring, a block diagram of the main operating modes, an interface of the developed software are developed. Depending on the mode chosen by the operator, the automatic control and monitoring system allows activation of metal hydride materials, purification of contaminants of harmful impurities, sorption and desorption of hydrogen.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.