Abstract
The purpose of this study is to develop a new BWR fuel with high critical power and low pressure drop performance. In this report, the spacer which has a significant effect on thermal hydraulic performance, has been improved and the performance has been measured. The improved high performance spacer is a ferrule type spacer with twisted tape and improved flow tab. This spacer is called CYCLONE spacer. The test bundle consists of electrically heated rods in a 4×4 array configuration. The axial power shape is cosine. Two test assemblies with different radial power distribution have been used. One test assembly has the maximum power rods at the center of the test assembly and the other has the maximum power rods near the channel wall. The results show that the critical power performance of the bundle with CYCLONE spacers is 10 to 22% higher than that of the current bundle with ferrule spacers at BWR rated flow rate, while the pressure drop is about 3% higher at BWR rated conditions (quality 15%).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of the Atomic Energy Society of Japan / Atomic Energy Society of Japan
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.