Abstract
정밀 장비 운전시 지반진동 절연을 목적으로 널리 사용되는 공압제진대는 정밀 장비에서 요구하는 지반진동 규제의 강화에 따라 보다 개선된 절연성능을 요구받는다. 수동형 공압제진대의 경우, 제진대의 설계 변수들을 이용하여 그 성능을 개선하고 있으나, 제진대의 고유진동수 및 그 부근에서의 절연 성능 향상에는 한계가 있다. 이 연구에서는 진폭 의존성 등의 비선형성을 가지는 공압제진대에 대하여 비선형 강인성 능동제어이론인 시간지연 제어 기법을 적용하여 고유진동수 및 그 부근에서의 절연성능을 향상시키고자 한다. 공압제진대에 시간지연 제어기법을 적용하는 과정 및 능동제어 이론 적용에 따른 절연 성능 향상에 대한 모사실험 결과를 기술하고자 하며, 실험을 통하여 그 유효성 보이고자 한다. As environmental vibration requirements on precision equipment become more stringent, use of pneumatic isolators has become more popular and their performance is subsequently required to be further improved. Dynamic performance of passive pneumatic isolators is related to various design parameters in a complicated manner and, hence, is very limited especially in low frequency range by volume of chambers. In this study, an active control technique, so called time delay control which is considered to be adequate for a low frequency or nonlinear system, is applied to a single chamber pneumatic isolator. The procedure of applying the tine delay control law to the pneumatic isolator is presented and its effectiveness in enhancement of transmissibility performance is shown based on simulation and experiment. Comparison between passive and active pneumatic isolators is also presented.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Transactions of the Korean Society for Noise and Vibration Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.