수직형 손잡이와 수평형 손잡이의 높이와 간격에 따른 미는 힘 비교

Abstract

Manual materials handling tasks are the main risk factors for the work-related musculoskeletal disorders. Many assistant tools for manual materials handling are being used in various kind of industries. One of them is a 4-wheeled cart which is widely used in manufacturing factories, hospitals, etc. The major force required to control the 4-wheeled cart is pushing and pulling. There are two types of handles being used for the 4-wheeled cart : vertical type (two vertical handles), and horizontal type (one horizontal handle). This study tried to investigate the pushing forces and subjective discomforts (hand/writst, shoulder, low back, and overall) of the two handle types with different handle height and distance conditions. Twelve healthy male students (mean age = 23.4 years) participated in the experiment. The independent variables were handle angle (horizontal, vertical), handle height (low, medium, high), and handle distance (narrow, medium, wide). The full factorial design was used for the experiment and the maximum pushing forces were measured in 18 different conditions (2×3×3). Analysis of variance (ANOVA) procedure was conducted to test the effects of the independent variables on the pushing force and discomfort levels. Handle height and angle were found to be the critical design factors that affect the maximal pushing forces and subjective discomfort. In the middle height, subjects exerted higher pushing forces, and experience lower discomfort levels compared to the high, and low height. There was no statistical influence of the handle distance to the pushing forces and subjective discomfort levels. It was found out that the effects of the handle angle (horizontal and vertical) on both pushing force and subjective discomfort were statistically significant (p < 0.05). The vertical handle revealed higher pushing force and lower discomfort level than the horizontal handle. The reason for that was thought to be the different postures of the hand when grasping the handles. The horizontal handle induced pronaton of the hand and made hand posture more deviated from the neutral position. Keyword : Handle design, Handle angle, Handle height, Handle distance, Maximal pushing force †이 논문은 2014년 대구가톨릭대학교 교내 연구지원금에 의한 것임 †Corresponding Author : Young-Woong Song, 13-13 Hayang-ro, Hayang-eup, Gyeongsan-si, Gyeongbuk, Korea 712-702 Received October 20, 2014; Revision Received December 12, 2014; Accepted December 18, 2014. 수직형 손잡이와 수평형 손잡이의 높이와 간격에 따른 미는 힘 비교 송 영 웅 372