МЕТОДОЛОГИЧЕСКИЙ ПОДХОД К ЭНЕРГОСБЕРЕГАЮЩЕМУ ХЛАДОСНАБЖЕНИЮ СИСТЕМ КОНДИЦИОНИРОВАНИЯ ВОЗДУХА АДАПТАЦИЕЙ К ТЕКУЩИМ КЛИМАТИЧЕСКИМ УСЛОВИЯМ

Abstract

The methodological approach was suggested to define a rational heat load of the air conditioning system (ACS) with taking into consideration the current climatic conditions of operation. The proposed approach is based on the hypothesis of sharing the current changeable heat load on the relatively stable share as the basic one for choosing installed (designed) refrigeration capacity of the refrigeration machine, operating with high energy efficiency in nominal or similar modes, and unstable heat load, corresponding to ambient air precooling at changeable current temperatures. To prove the methodological approach to defining a rational heat load of the ACS was carried out the analysis of current values of heat loads of the refrigeration machine ACS during cooling ambient air from its changeable current temperature to the temperature of 10, 15 and 20 ºС . It is shown that due to the different rates of annular refrigeration capacity production increment to cover the current heat loads with increasing the installed refrigeration capacity of the refrigeration machine, caused by the changes in heat load according to current climatic conditions during all the year round, it is necessary to choose a such heat load on the refrigeration machine of ACS (its installed refrigeration capacity), that provides a maximum or similar annular refrigeration capacity production at relatively high rates of its increment. Therein, the value of heat load for ambient air precooling is calculated according to remained principle as the difference between the rational total heat load and its basic relatively stable share. The proposed method is useful for defining a basic installed refrigeration capacity of the refrigeration machine of ACS with the accumulation of excessive (unapplied) refrigeration capacity at lowered current heat loads on ACS and its application for ambient air precooling, that is for covering unstable heat load share on ACS