Abstract
This report considers the low melting point Au-Sn microsoldering (bonding heat tool temp. 523 K and time is 5 sec.) which is applied to the 400 pin count and 0.2 mm lead pitch TCP (Tape Carrier Package) assembling. This method is performed by heat and press tool gang bonding of tin electroplated (6.5 μm thick) copper pattern on substrate and gold electroplated (1.0, μm thick) TCP outer lead with non flux in air. Au-Sn microsoldered layer has the high peel strength and has the high reliability in 423 K storage in air that is higher than Sn-37 mass%Pb microsoldering. And the organic glass-epoxy (FR-4) substrate is not damaged after the Au-Sn microsoldering.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
