Abstract
The powder-in sheath rolling was applied to the fabrication of <TEX>$Al/Al_2O_3$</TEX> composite. A stainless steel tube with outer diameter of 12 mm and wall thickness of 1 mm was used as a sheath. Mixture of aluminum powder and <TEX>$Al/Al_2O_3$</TEX> particles of which volume content was varied from 5 to 20 vol.% was filled in the tube by tap filling and then rolled to 75% reduction at ambient temperature. The re]]ed specimen was sintered at 56<TEX>$0^{\circ}C$</TEX> for 0.5 hr. The <TEX>$Al/Al_2O_3$</TEX> composite fabricated by the sheath rolling and subsequent sintering showed the relative density higher than 0.96. The tensile strength of the composite increased with the volume content of <TEX>$Al_2O_3$</TEX> particles, and it reached a maximum of 90 MPa which is 1.5 times higher than unreinforced material. The elongation decreased with the volume content of <TEX>$Al_2O_3$</TEX> particles. It is concluded that the powder-in sheath rolling is an effective method for fabrication of <TEX>$Al/Al_2O_3$</TEX> composite.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
