Abstract
본 논문에서는 고속 직렬 링크에 사용할 수 있는 5비트 2.0GS/s 2-way time interleaved 파이프라인 ADC 기반의 수신기를 소개한다. 샘플링 주파수를 높이기 위해, ADC 각 단은 트랙킹과 증폭이 동시에 수행되는 전류 모드 구조를 사용하였다. 또한 ADC 각단에 1-tap FIR 등화기를 탑재하여 별도의 디지털 후처리 없이 채널의 ISI를 감소시켰다. 제안한 수신기는 110nm 공정을 사용하여 설계하였다. 메모리를 제외한 수신기는 <TEX>$0.58{\times}0.42mm^2$</TEX>의 크기를 갖고, 동작전압 1.2V에서 91mW의 전력을 소모한다. 시뮬레이션 결과 2.0GS/s 샘플링 주파수에서 20MHz의 입력 주파수와 Nyquist 주파수인 1.0GHz 입력신호에 대하여 동일하게 26.0dB의 SNDR과 4.0비트의 ENOB특성을 확보하였다. In this paper, a 5-bit 2-GS/s 2-way time interleaved pipeline ADC for high-speed serial link receiver is demonstrated. Implemented as a current-mode amplifier, the stage ADC simultaneously processes the tracking and residue amplification to achieve higher sampling rate. In addition, each stage incorporates a built-in 1-tap FIR equalizer, reducing inter-symbol-interference (ISI）without an extra digital post-processing. The ADC is designed in a 110nm CMOS technology. It comsumes 91mW from a 1.2-V supply. The area excluding the memory block is <TEX>$0.58{\times}0.42mm^2$</TEX>. Simulation results show that when equalizer is enabled, the ADC achieves SNDR of 25.2dB and ENOB of 3.9bits at 2.0GS/s sample rate for a Nyquist input signal. When the equalizer is disengaged, SNDR is 26.0dB for 20MHz-1.0GHz input signal, and the ENOB of 4.0bits.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Institute of Electronics and Information Engineers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
