Abstract
In this study, two-dimensional finite element models were developed and experiments were conducted using an atomic force microscope to investigate the tribological characteristics of an SU-8 layer coated on a patterned wafer for microsystem applications. The results revealed that both the adhesion and the friction forces measured by the atomic force microscope were lower for the SU-8 coated surface than for the bare silicon surface. This is attributed to the hydrophobicity of SU-8. Another important result derived from the finite element analysis was the critical load required to fracture the SU-8 film with respect to the thickness. The critical loads for thicknesses of 200, 400, and 800 nm were approximately 13, 22, and 28 mN, respectively, which corresponded to a Hertzian contact pressure of 1.2-1.8 GPa. These results will aid in the design of a suitable SU-8 thickness for microsystem components that are in contact with one another.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Transactions of the Korean Society of Mechanical Engineers A
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
