Abstract

It was noted that the use of alternative fuels for the production of thermal and electric energy in the face of energy scarcity is an urgent task of the present. The paper states that combustion of gas from low-grade solid fuels has several advantages. At the same time, it is noted that during gasification of wood, agricultural crops, peat, brown coal, as well as some types of coal, a considerable amount of resinous substances, which condense during the cooling of gas, is released. The analysis of literary information on methods of gasification of alternative types of fuels, on requirements to the content of resins in the generator gas, as well as on the properties of resins. It is shown that among the known methods of gasification, the most effective in terms of obtaining a non-slag gas is the step-by-step gasification. The information on the content of resins in the generator gas during the gasification of various types of fuels is systematized. It is noted that the pollution of the generator gas resins leads to the need to use expensive gas cleaning systems and makes it necessary to look for new ways to control the gasification process. It is shown that most of the most common technologies of biomass gasification do not meet the requirements of Diesel engine manufacturers for the content of resins in generator gas (5 - 100 mg/m3). Therefore, the most expedient way to get the generator gas for combustion in the internal combustion engine is stepped gasification. The composition of the resin has been analyzed and it is shown that among the five classes of resins the most widespread during the gasification of wood are classes 2 and 4, the temperature of the dew point of resin for them ranges from 40 to 135 ° C in the range of concentration of resin in gas from 5 mg/m3 to 10 g/m3 It is noted that information on the admissible content of resins in flue gases, which will exclude their condensation, in the direct burning of wood and other alternative types of fuel in open access.

Highlights

  • Вінницький національний технічний університетВ роботі відзначено, що використання альтернативних видів палив для виробництва теплової та електричної енергій за умов дефіциту енергоносіїв є актуальним завданням сьогодення

  • Проведен анализ литературной информации по способам газификации альтернативных видов топлива

  • It was noted that the use of alternative fuels

Read more

Summary

Вінницький національний технічний університет

В роботі відзначено, що використання альтернативних видів палив для виробництва теплової та електричної енергій за умов дефіциту енергоносіїв є актуальним завданням сьогодення. Що при газифікації деревини, сільськогосподарських культур, торфу, бурого вугілля, а також деяких видів кам'яного вугілля виділяється значна кількість смолистих речовин, що конденсуються при охолодженні газу. Систематизовано інформацію по вмісту смол в генераторному газі при газифікації різних видів палив. Тому найбільш доцільним способом отримання генераторного газу для спалювання його в ДВЗ є ступінчаста газифікація. Використання альтернативних видів палив (відходів деревини, сільськогосподарських культур (кукурудзи, соняшнику, соломи зернових культур тощо), зокрема низькосортних (торфу, бурого вугілля, тощо), для виробництва теплової та електричної енергій за умов дефіциту енергоносіїв є актуальним завданням сьогодення. Торфу, бурого вугілля, відходів сільськогосподарських культур, а також деяких видів кам'яного вугілля, виділяється значна кількість смолистих речовин, що конденсуються при охолодженні газу. Інформація по допустимій кількості смол в генераторному газі, що спалюється в ДВЗ в літературних джерелах наводиться різна, від 5 до 100 мг/м3 [8, 10]

Реактор газифікації
СПИСОК ЛІТЕРАТУРИ
Винницкий национальный технический университет
Vinnytsia National Technical University
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call