Abstract
The present study evaluated the combined effects of organic-mineral additive based on a superplasticizer SR 5000F and the active mineral additive fly ash, blast furnace slag and silica fume SF-90 on properties of foam concrete. The calculation of mixture proportions of foam concrete is applied by the absolute volume method. Besides, the compressive strength and flexural strength of foam concrete are determined by Russian standard GOST 10180-2012. The porosity of the foamed concrete is determined by American standards ASTM C457-1998. The results from experiments show that flexural and compressive strength of the foam concrete obtained respectively, from 0.526 to 1.061 MPa and from 1.69 to 8.22 MPa. The relationship between compressive strength and curing age, compressive and flexural strengths of the FC were also determined in this investigation. The results of this study demonstrated that the use of fly ash and blast furnace slag to replace natural sand could produce foam concrete and environmental protection.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.