ВИЗНАЧЕННЯ ПАРАМЕТРІВ ГАЛЬМА ГРУЗОВОГО ВАГОНА ПО ЗАДАНИМ КРИТЕРІЯМ ГАЛЬМІВНОЇ ЕФЕКТИВНОСТІ ПОЇЗДА (чотиривісні напіввагони, криті вагони, платформи, думпкари)

Abstract

The lack of normative values of the actual coefficients in the new rules of HOST 34434-2018 do not allow to implement and determine the optimal characte-ristics of the brake according to pre-accepted conditions of braking efficiency (braking distance), which causes uncertainty in solving this problem. The uncertainty is that the choice of characteristics of the braking system of the freight wagon has to be done by searching a large number of options. In this regard, the paper provides tools for determining the actual pressing force of the brake pads on the wheels, which complies with the specified braking performance of the freight train. As a tool, universal formulas are used in the form of a power relationship between the actual force of the brake pads and the braking distance of the freight train. The coefficients of universal formulas are obtained on the basis of computer modeling. Numerous examples show that the error in the use of universal formulas in calculation studies does not exceed 1% compared with the calculation method according to HOST 34434-2018. The values of the actual coefficients depending on the axial load of the wagon and the speed at which the braking distances of the freight train satisfy the normative minimum allowable values are given. It is shown that calculation studies performed according to the universal formulas in the EXCEL environment allows to fully automating the computational process. A method for determining the gear ratio of the brake lever of a freight wagon, according to which the specified braking efficiency is performed, is proposed. The proposed procedure allows you to perform a variety of studies to select the optimal parameters of the braking system of freight wagons that meet the specified requirements of braking efficiency, and greatly facilitates the calculation studies. Key words: аctual coefficient, braking distance, speed, axial load, power dependence, coefficients, gear ratio.