Zoomed-in Images Research Articles

Are we taking too many pictures? An investigation of the impact of smartphone photography on memory

ABSTRACT Smartphones are a fundamental part of modern life and have resulted in a vast increase in photo-taking. How smartphone use can affect cognitive processes, including memory, is poorly understood, but research shows taking photographs can result in a photo-taking-impairment effect. Across 3 laboratory experiments, we aimed to replicate the impairment effect and shed light into the underlying mechanisms by manipulating encoding type (intentional vs. incidental) and recognition stimuli (zoomed-in vs. complete paintings). During the presentation of a mock museum tour, participants observed or photographed presented artworks. In Experiment 1 and 3 following intentional encoding, a photo-taking impairment effect impacting accuracy and confidence was observed. In Experiment 2, this impairment effect did not persist when encoding was incidental. Zoomed-in images did not modulate the photo-taking-impairment effect in Experiment 3. Results are discussed in relation to cognitive offloading and attentional disengagement hypotheses and appear to oppose attentional disengagement as a contributing mechanism.

Low-cost photoreactors for highly photon/energy-efficient solar-driven synthesis

Low-cost photoreactors for highly photon/energy-efficient solar-driven synthesis

Staining-free, Automated Sperm Analysis for In Vitro Fertilization Lab Use.

Computer-aided sperm analysis is typically used in andrology labs, not in in vitro fertilization labs, which requires staining for sperm morphology measurement. In in vitro fertilization labs, sperm analysis still relies on manual observation and suffers from subjectivity and inconsistency. We developed a system for automated measurement of sperm concentration, motility, and morphology without the need for sperm staining. The reproducibility and reliability of the system were evaluated. Thirty-five fresh semen and 25 washed samples were obtained from male partners attending for fertility investigations. Sperm concentration, motility, and morphology were automatically measured simultaneously, leveraging robust sperm tracking for concentration and motility measurement and low contrast image segmentation for morphology measurement of live sperm. Reproducibility of sperm measurements was evaluated by intraclass correlation coefficients. Reliability of sperm measurement was evaluated by Passing and Bablok regression analysis and Bland-Altman analysis. Automated measurement of concentration, motility, and morphology had intraclass correlation coefficients higher than 0.97. The regression and Bland-Altman analysis indicated that automated measurement and off-line manual benchmarking with zoomed-in images were interchangeable. Further analysis on semen and washed samples and the measurement on progressive and nonprogressive motility also showed high reproducibility and reliability. Automated sperm analysis revealed high reproducibility and reliability. The system is designed for routine use in in vitro fertilization labs to perform quantitative sperm analysis on live samples.

A Simultaneous Multi-Object Zooming System Using an Ultrafast Pan-Tilt Camera

This paper presents a novel dual-camera system that can simultaneously capture zoomed-in images using an ultrafast pan-tilt camera and a fixed wide-view camera using deep learning methods. An ultrafast pan-tilt camera can function as multiple virtual pan-tilt cameras by synchronizing a high-frame-rate zooming-view camera and an ultrafast pan-tilt mirror device that can switch over 500 different views in a second. A wide-view camera can obtain images in a fixed view in which multiple targets to be tracked are captured in low resolution and then recognized by processing the images using deep learning methods at a rate of dozens of frames per second. Based on the positions of all targets, recognized by the wide-view camera, the pan and tilt angles of multiple pan-tilt cameras are virtually controlled using an ultrafast pan-tilt camera through multithread viewpoint control to simultaneously capture the zoomed-in images of all targets. Our developed system can operate 10 virtual pan-tilt cameras (25 fps) with multithread viewpoint control and 4 ms time granularity in synchronization with convolutional neural-network-based recognition model operating at 25 fps, which is accelerated by a general-purpose computing on graphics processing units. The effectiveness of our system was demonstrated by the results of several experiments conducted on simultaneous zoom shooting of multiple running objects (persons and cars) in the range of approximately 80 m or higher in a natural outdoor scene, which was formerly too wide for a single fixed camera to capture clearly and simultaneously.

Atomic-Scale Studies of Overlapping Grain Boundaries between Parallel and Quasi-Parallel Grains in Low-Symmetry Monolayer ReS2

Summary Grain boundaries (GBs) are significant microstructures that dominate properties of polycrystalline two-dimensional (2D) materials. Low-symmetry rhenium disulfide monolayers provide an ideal platform to investigate diverse configurations of GBs and their orientation-dependent characteristics. Here, we utilize the preferential deposition of platinum-based nanoparticles on grain edges to rapidly locate nanoscale-wide overlapping GBs during microscopic-scale observation. Atomic-resolution investigations by aberration-corrected annular dark-field scanning transmission electron microscopy reveal diverse overlapping GBs constructed by parallel grains with transversal displacement. They prefer to align along several primary lattice directions with different interlayer atomic registries. Calculations show that the electronic band structures of overlapping GBs are strongly direction dependent, suggesting their potential in tunable electronic and photonic devices. Incommensurate overlapping GBs formed by quasi-parallel grains with ultrasmall twist angles are also observed. These results unveil the rich polymorphism of GBs and new opportunities to tailor properties of anisotropic 2D materials via GB engineering.

Novel image restoration method based on multi‐frame super‐resolution for atmospherically distorted images

In this study, the authors propose a novel multi-frame super-resolution method using frame selection and multiple fusions for atmospherically distorted, zoomed-in, image-quality enhancement. When a small part of the image captured by placing a target several kilometres away from the fixed camera is enlarged, the quality of the part becomes poor owing to low resolution, spatial deformations and noise that are mainly caused by long distance and atmospheric turbulence. Thus, the authors propose an adaptive frame selection method that selects only a few frames with small blur based on the corresponding images with relatively clear edges. Further, they propose multiple fusion schemes to reconstruct the selected frames, thereby suppressing the influence of deformation. By converting all the frames into high-resolution based on each frame and integrating them, deformation and noise are effectively removed without high computation cost using the multiple fusion scheme. The proposed method, which enhances the quality of atmospherically distorted zoomed-in images, exhibits superior performance than the state-of-the-art image super-resolution methods with regard to high accuracy, efficiency and ease of implementation, ensuring that the proposed method is suitable for enhancing the quality of an image captured using a general digital camera or a smartphone.

The influence of lip form on incisal display with lips in repose on the esthetic preferences of dentists and lay people

Statement of problemInformation is lacking for viewer preferences for incisal display with lips in repose. PurposeThe purpose of this online survey was to establish measurement parameters to classify and define a lip form and to evaluate the influence of lip form on dentists’ and laypersons’ preferences for the amount of incisal display with lips in repose. Material and methodsComputer-generated male and female models were created using 3 different lip forms each, straight, moderate, and high. Three images of these models (frontal full face, zoomed-in frontal around the mouth, and oblique zoomed-in image of the mouth) were arranged in an interactive survey that was disseminated on the Websites Facebook, Instagram, DentalTown and by word-of-mouth. Respondents manipulated the incisal display of all 3 images in unison, using a slide bar, and the resulting incisal display was measured in millimeters and served as the primary dependent measure. Survey demographic data were obtained from an online survey site. Data were assessed for skewness, kurtosis, and outliers and analyzed with 5-way ANOVA: 2 sex levels for model, 2 levels for sex of respondent, 3 levels for lip height, 3 levels for occupation, and 5 levels of ethnicity, with multiple comparisons corrected with Bonferroni adjustments and post hoc comparisons performed using the Scheffé test (α=.05 for all comparisons). ResultsA total of 1039 individuals consented to the study. A final sample size of 687 respondents was obtained after excluding 352 who failed to complete the survey. The results indicated that lip form affected the esthetic perception of incisal display significantly (P<.001), with a preference for a greater amount of incisal display corresponding with increasing lip forms. Sex of the model was also significant, with greater incisal display being preferred for female faces. A significant difference was found for respondents’ ethnicity, with African Americans generally preferring smaller incisal displays than other ethnic groups. No other main effects were found to be statistically significant. Only 2 interactions were shown to be statistically significant. Post hoc tests examining the interaction between lip form and sex of model showed a preference for greater incisal displays for female faces with high lip forms. A 3-way interaction was observed between lip form, sex of respondent, and occupation. ConclusionsSignificant differences were identified for the 3 different lip forms for both sexes of models. As the lip form changed from straight to moderate to high, there was a preference for increased incisal display. Incisal display preferences for male and female models were the same for all respondents, except for the high lip form, for which a greater amount of incisal display was preferred for the female model. Sex and occupation of respondent failed to produce main effects. Respondents’ ethnicity was shown to be statistically significant, with African Americans generally preferring shorter incisal displays.

Lysosome membrane lipid microdomains: novel regulators of chaperone-mediated autophagy

Chaperone-mediated autophagy (CMA) is a selective mechanism for the degradation of soluble cytosolic proteins in lysosomes. The limiting step of this type of autophagy is the binding of substrates to the lysosome-associated membrane protein type 2A (LAMP-2A). In this work, we identify a dynamic subcompartmentalization of LAMP-2A in the lysosomal membrane, which underlies the molecular basis for the regulation of LAMP-2A function in CMA. A percentage of LAMP-2A localizes in discrete lysosomal membrane regions during resting conditions, but it exits these regions during CMA activation. Disruption of these regions by cholesterol-depleting agents or expression of a mutant LAMP-2A excluded from these regions enhances CMA activity, whereas loading of lysosomes with cholesterol significantly reduces CMA. Organization of LAMP-2A into multimeric complexes, required for translocation of substrates into lysosomes via CMA, only occurs outside the lipid-enriched membrane microdomains, whereas the LAMP-2A located within these regions is susceptible to proteolytic cleavage and degradation. Our results support that changes in the dynamic distribution of LAMP-2A into and out of discrete microdomains of the lysosomal membrane contribute to regulate CMA.

X-ray micro-tomography system for small-animal imaging with zoom-in imaging capability

Since a micro-tomography system capable of µm-resolution imaging cannot be used for whole-body imaging of a small laboratory animal without sacrificing its spatial resolution, it is desirable for a micro-tomography system to have local imaging capability. In this paper, we introduce an x-ray micro-tomography system capable of high-resolution imaging of a local region inside a small animal. By combining two kinds of projection data, one from a full field-of-view (FOV) scan of the whole body and the other from a limited FOV scan of the region of interest (ROI), we have obtained zoomed-in images of the ROI without any contrast anomalies commonly appearing in conventional local tomography. For experimental verification of the zoom-in imaging capability, we have integrated a micro-tomography system using a micro-focus x-ray source, a 1248 × 1248 flat-panel x-ray detector, and a precision scan mechanism. The mismatches between the two projection data caused by misalignments of the scan mechanism have been estimated with a calibration phantom, and the mismatch effects have been compensated in the image reconstruction procedure. Zoom-in imaging results of bony tissues with a spatial resolution of 10 lp mm−1 suggest that zoom-in micro-tomography can be greatly used for high-resolution imaging of a local region in small-animal studies.