Zeolite Powder Research Articles

Investigating the early age crack resistance of concrete treated with silane-modified zeolite powder

This study investigates the efficacy of silane-modified zeolite powder in enhancing the early age crack resistance of concrete. Three concrete mixes were evaluated: a reference mix, a 20 % zeolite replacement mix, and a silane-modified zeolite mix. The silane-zeolite mix demonstrated significant improvements, extending the time to crack by 70 % compared to the reference mix (from 11.2 to 19.1 hours). Mechanical strength tests revealed a 58 % increase in first-crack strength for the silane-zeolite mix over the reference mix. Water absorption tests showed that the silane-zeolite mix absorbed 42 % less water than the reference mix, indicating a denser microstructure. Microscopic analyses confirmed these findings, revealing a more refined pore structure with reduced microcrack frequency and width in the silane-zeolite mix. These results highlight the potential of silane-modified zeolite in improving concrete durability and longevity.

Sintesis Zeolit dari Abu Sekam Padi (OryzaSativa L.) Serta Uji Efektifitasnya Sebagai Material Antiseptik

Rice husks are obtained from 20% rice milling and have a silica content of 94-99% of ashed rice husks. Zeolite is a silica-based material and is known as an aluminosilicate compound, because it is formed from two main components, namely tetrahedral AlO4- and SiO4¬-. Synthetic zeolite is obtained by reacting Sodium Silicate (A) with Sodium Aluminate (B) which is then aged at 100oC for 24 hours to produce white synthetic Zeolite powder. Zeolite synthesis will be made with three variations of mixture ratios, namely 30A:70B, 50A:50B, 70A:30B and the characteristics of each will be evaluated. To test the success of this synthetic zeolite as an antiseptic material, its ability to reduce the infectious value of Bacteriuria and Candiduria will be tested, which will be represented by Escherecia coli and Candida albicans. The results obtained from the three variations of synthetic zeolite that were made had the same characteristics and had a ratio of less than two or type A. Synthetic zeolite made at a dose of 600 mg had the ability to act as an antiseptic material against Escherichia coli 104 by reducing the number of colonies to 72-79 %, as well as Candida albicans 103 was able to reduce the number of C. albicans colonies by 74-80%, this value is lower than Attapulgite 600mg in reducing the same number of colonies, namely 90% for bacteriuria and 94.90% for candiduria. To equalize its capabilities with Attapulgite 600 mg, the dosage of the synthetic zeolite obtained in the research was increased to 700 mg

Effects of silicate stabilizers on cadmium reduction and the quality of rice grains in acidic paddy soil

Silicate has been proven to be highly-effective at immobilizing soil heavy metals, but the effects of silicate stabilizers on rice grain cadmium (Cd) reduction and rice quality under field conditions are not clear. In this study, a field experiment was conducted over three consecutive years was conducted to examine the Cd reduction in rice grains and to reveal the potential effects of silicate stabilizers on rice grain nutrients, by setting different amounts of bentonite (B), silica‒calcium fertilizer (SC) and zeolite powder (ZP). The results revealed that the application of the B, SC and ZP significantly decreased the soil CaCl2‒Cd concentration (> 39%) and significantly reduced the grain Cd concentration in both early rice (> 70%) and late rice (> 18%) under field conditions; the silicate stabilizers reduced the soil available iron (Fe) but did not limit rice grain Fe nutrition. Additionally, the three silicates promoted rice yield and improved the rice grain Ca and Mg contents; and the application of B increased the amylose concentration of the late rice grains. In conclusion, high amounts of silicate stabilizers did not adversely influence the soil conventional nutrient indices, rice minerals or rice taste, but changes in rice selenium content need attention. Overall, in comparison with lime, silicate stabilizers can improve not only the safety of rice but also the nutritional and taste qualities of rice and are more eco-friendly for long-term use in soil.

Enhancing biofilm formation with powder carriers for efficient nitrogen and phosphorus removal

This study assesses the improvement in nitrogen and phosphorus removal from wastewater achieved through the integration of zeolite and attapulgite carrier materials into the activated sludge (AS) process. It was found that the addition of these materials significantly enhanced the processing performance of the reactor. Specifically, the use of zeolite and attapulgite powders increased sludge particle sizes to averages of 231.56 μm and 219.62 μm, respectively. This facilitated micro-granule formation, substantially improving the settling characteristics of the sludge and boosting the activity and proliferation of essential microbes. Illumina MiSeq sequencing demonstrated significant accumulations of DGAOs (Candidatus_Competibacter) and DPAOs (Candidatus_Accumulibacter). Furthermore, these carriers augmented the protein content in extracellular polymers, enhancing the hydrophobicity of the sludge and promoting aggregation. Comparative analysis based on the extended Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory indicated a preferential adhesion affinity of sludge for zeolite compared to attapulgite, attributed primarily to Lewis acid-base and electric double-layer interactions. These findings underscore zeolite's enhanced efficacy in biomass fixation and suggest significant potential for the technological advancement of wastewater treatment plants.

Illuminating the role of powder carrier materials in shaping sludge aggregation in wastewater treatment: Insights from extended operation performance to microbial response mechanism

This study uncovered the response of novel micro-granule wastewater treatment technology to different powder carrier materials. Characteristics and distinctions among different systems were assessed based on process performance, sludge aggregation capacity, and microbial metabolism. Zeolite carrier system exhibited remarkable nitrogen removal efficiency of 89.6 ± 0.9 %, while diatomite carriers, in conjunction with intermittent aeration, enhanced simultaneous nitrification and denitrification from 2.6 % to 27.1 %. Iron-based carriers demonstrated efficient phosphorus removal (94.7 ± 1.2 %) through both chemical and microbial pathways. Specific surface area, pore structure and biocompatibility of powder carriers determined the formation and size of micro-granules. Tryptophan-like substances, C-(C/H), and Npr in extracellular polymeric substances strongly correlated with sludge hydrophobicity and granulation. Significant enrichment in norank_Comamonadaceae and Nitrosomonas in zeolite powder carrier system promoted partial nitrification and endogenous denitrification. Differences in metabolic pathways elucidated the up-regulation of amino acid synthesis, energy metabolism, and membrane transport as potential mechanisms driving micro-granule formation and efficient treatment performance.

Occurrence of 40 sanitary indicators in French digestates derived from different anaerobic digestion processes and raw organic wastes from agricultural and urban origin.

This study investigated the sanitary quality of digestates resulting from the mesophilic anaerobic digestion (AD) of urban and agricultural organic wastes (OWs). 40 sanitary indicators, including pathogenic bacteria, antimicrobial resistance genes, virulence factor genes, and mobile genetic elements were evaluated using real-time PCR and/or droplet digital PCR. 13 polycyclic aromatic hydrocarbons (PAHs) and 13 pharmaceutical products (PHPs) were also measured. We assessed agricultural OWs from three treatment plants to study the effect of different AD processes (feeding mode, number of stages, pH), and used three laboratory-scale reactors to study the effect of different feed-supplies (inputs). The lab-scale reactors included: Lab1 fed with 97% activated sludge (urban waste) and 3% cow manure; Lab2 fed with 85% sludge-manure mixture supplemented with 15% wheat straw (WS); and Lab3 fed with 81% sludge-manure mixture, 15% WS, and 4% zeolite powder. Activated sludge favored the survival of the food-borne pathogens Clostridium perfringens and Bacillus cereus, carrying the toxin-encoding genes cpe and ces, respectively. Globally, the reactors fed with fecal matter supplemented with straw (Lab2) or with straw and zeolite (Lab3) had a higher hygienization efficiency than the reactor fed uniquely with fecal matter (Lab1). Three pathogenic bacteria (Enterococcus faecalis, Enterococcus faecium, and Mycobacterium tuberculosis complex), a beta-lactam resistance gene (bla TEM), and three mobile genetic elements (intI1, intI2, and IS26) were significantly decreased in Lab2 and Lab3. Moreover, the concentrations of 11 PAHs and 11 PHPs were significantly lower in Lab2 and Lab3 samples than in Lab1 samples. The high concentrations of micropollutants, such as triclosan, found in Lab1, could explain the lower hygienization efficiency of this reactor. Furthermore, the batch-fed reactor had a more efficient hygienization effect than the semi-continuous reactors, with complete removal of the ybtA gene, which is involved in the production of the siderophore yersiniabactin, and significant reduction of intI2 and tetO. These data suggest that it is essential to control the level of chemical pollutants in raw OWs to optimize the sanitary quality of digestates, and that adding co-substrate, such as WS, may overcome the harmful effect of pollutants.

Experimental Investigation on Concrete with Zeolite Powder, Silica Fume and Cashew Nut Shell Ash

Abstract: This experimental investigation explores the impact of incorporating zeolite powder as a partial replacement for fine aggregate, along with silica fume and cashew nut shell ash (CNSA) as partial replacements for cement in concrete. Zeolite, a natural aluminosilicate mineral, is known for its pozzolanic properties, which can enhance the mechanical and durability characteristics of concrete. Silica fume, a byproduct of silicon and ferrosilicon alloy production, is renowned for its high silica content and fineness, contributing to the strength and density of concrete. Cashew nut shell ash, an agricultural waste product, offers a sustainable alternative to traditional cementitious materials, potentially reducing the environmental footprint of concrete production. This experimental study investigated the effects of partially replacing fine aggregate with zeolite powder (5%,10% and 15%) and cement with silica fume (3%,6%,9%,12% and 15%) and cashew nut shell ash (5%,7.5%,10%,12.5%,15% and 17.5%) on the properties of concrete. This study underscores the viability of using zeolite powder, silica fume, and CNSA in sustainable concrete production, contributing to the development of more environmentally friendly construction materials. Further research is recommended to explore the long-term performance and environmental benefits of these alternative materials in concrete applications.

STUDY OF THE COMBINED EFFECT OF POST-SYNTHETIC ALKALINE TREATMENT AND NICKEL MODIFICATION OF MFI ZEOLITE ON THE DYNAMICS OF ITS DEACTIVATION IN THE PROCESS OF REFINING STRAIGHT-RUN GASOLINE

To determine the combined effect of post-synthetic treatments on the catalytic properties of MFI type zeolite (other names ZSM-5 or pentasil) during the upgrading of straight-run gasoline fraction of oil, MFI zeolite was synthesized and on its basis a sample was obtained, treated with an alkaline solution, as well as a nickel-containing sample after alkaline treatment of the zeolite. Modification of zeolite powder treated with an alkaline solution with nanosized nickel powder was carried out by dry mechanical mixing of the original powders in a vibrating mill. The activity and dynamics of deactivation of the obtained zeolite catalysts during the upgrading of straight-run gasoline fraction of oil were studied. Along with determining the characteristics of the target reaction products - high-octane gasoline, an analysis of the resulting gaseous hydrocarbons was carried out and the amount of carbon compaction products was determined. It has been shown that post-synthetic treatments of zeolite have a positive effect on the qualitative composition and yield of catalysates and reduce the rate of deactivation of zeolite catalysts. Post-synthetic alkaline treatment of MFI zeolite significantly reduces its aromatizing and cracking activity, resulting in an increased yield of high-octane gasoline with improved environmental characteristics. The introduction of nickel nanopowder into alkali-treated zeolite further enhances this tendency. Carrying out post-synthetic treatments of zeolite increases the time of stable operation of the resulting zeolite systems in the process of upgrading straight-run gasoline and reduces the amount of carbon compaction products formed. The state, location and dimensions of the zeolite carrier, nickel particles and carbon compaction products were determined using the transmission electron microscopy method. It has been shown that oxidative regeneration of a carbonized catalyst makes it possible to almost completely remove the resulting carbon deposits from the surface of both the active component and the zeolite support. For citation: Velichkina L.M., Gerasimov E.Yu., Vosmerikov A.V. Study of the combined effect of post-synthetic alkaline treatment and nickel modification of MFI zeolite on the dynamics of its deactivation in the process of refining straight-run gasoline. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2024. V. 67. N 8. P. 103-112. DOI: 10.6060/ivkkt.20246708.10t.

Immobilization of 137Cs in NaY type zeolite matrices using various heat treatment methods

The accumulation of liquid radioactive waste presents a significant global challenge, necessitating effective strategies for safe management. This study investigates the immobilization of 137Cs radionuclides, a prominent component of liquid radioactive waste, in ceramic matrices based on 137Cs-saturated NaY Faujasite zeolite. Various thermal methods were employed, including cold pressing and sintering, cold pressing and sintering with microwave assistance, hot pressing, and spark plasma sintering, to enhance immobilization capabilities. Zeolite powder was saturated with 137Cs radionuclides using an adsorption technique with low-activity model liquid radioactive waste. In-situ XRD and dilatometry methods were used to study the thermal behavior during NaY Faujasite annealing. The influence of calcination temperature on lattice parameters and crystallite size was assessed. Immobilization effectiveness was evaluated through relative density, Vickers microhardness, compressive strength, and metal ion leaching kinetics. Mechanistic evaluation was performed using XRD and SEM-EDX studies. Results showed that spark plasma sintering exhibited the highest efficiency for immobilizing 137Cs radionuclides in NaY Faujasite matrices. This research contributes to liquid radioactive waste management by providing insights into the thermal behavior and enhanced immobilization capabilities of ceramic matrices.

Investigation of the mechanical and durability properties of concrete containing modified fly ash and modified zeolite powder: An effective transport model for sulfate ions in concrete

The application of conventional fly ash and zeolite powder in the field of concrete durability is limited. In this study, durability tests coupling dry-wet cycling and sulfate erosion were conducted on concrete with varying dosages of modified fly ash (MFA) and modified zeolite powder (MZP). The compressive strength, failure mode, water absorption rate, and ion concentration changes were systematically investigated. The reaction products and structure were analyzed through SEM, EDS, and XRD tests, correlating with macroscopic parameters. An effective transport model for sulfate ions in concrete was established, considering the material influence coefficient km and the effective diffusion coefficient De. The results indicate that a higher content of Ca phases in MFA leads to a reduction in concrete early strength, while later stages exhibit rapid strength growth due to pozzolanic reactions. MZP contains a significant amount of Al and Si phases, which promote both early and later-stage concrete strength. MFA and MZP enhance the resistance of concrete to sulfate erosion, with MZP exhibiting a significantly superior improvement effect compared to MFA. This is attributed to the following factors: on the one hand, the addition of MFA and MZP reduces the porosity and improves the pore structure of concrete, thus delaying the diffusion of sulfate ions into the concrete; on the other hand, the pozzolanic reactions of MFA and MZP consume available calcium hydroxide, leading to the formation of C–S–H and C-A-S-H gels, which densify the microstructure and reduce the probability of leaching erosion of hydration products, thereby limiting the formation of ettringite. The applicability and reliability of the sulfate-ion effective transport model were verified based on experimental data. The model can be employed to predict the distribution of sulfate ions in different types of concrete under various erosion durations, reducing workload and providing a theoretical basis for the durability design and service life prediction of concrete structures in sulfate environments.

Freeze-Thaw Cycle Durability and Mechanism Analysis of Zeolite Powder-Modified Recycled Concrete.

The inferior mechanical performance and freeze-thaw (FT) resistance of recycled concrete are mostly due to the significant water absorption and porosity of recycled coarse particles. In this study, different dosages of zeolite powder were used in recycled concrete. A series of macroscopic tests were used to evaluate the workability and FT durability of zeolite powder-modified recycled concrete (ZPRC). X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to reveal the micro-mechanisms of FT resistance in ZPRC. The results show that the increase in zeolite powder content leads to a decrease in the slump and water absorption of ZPRC. Additionally, ZPRC with 10% zeolite powder has superior mechanical characteristics and tolerance to FT conditions. The higher strength and FT resistance of the ZPRC can be attributed to the particle-filling effect, water storage function, and pozzolanic reaction of zeolite powder, which results in a denser microstructure. The particle-filling effect of zeolite powder promotes the reduction of surface pores in recycled coarse aggregates (RCAs). The water storage function of zeolite powder can provide water for the secondary hydration of cement particles while reducing the free water content in ZPRC. The pozzolanic reaction of zeolite powder can also promote the generation of hydrated calcium silicate and anorthite, thereby making the microstructure of ZPRC more compact. These results provide theoretical guidance for the engineering application of recycled concrete in cold regions.

Prediction on partial replacement of cement and coarse aggregate by zeolite powder and steel slag in high-performance concrete

High performance concrete is obtained by the inclusion of mineral admixtures like silica fume and fly ash in the concrete. The research explores the viability and performance of sustainable concrete by introducing zeolite powder as a partial substitute for cement and steel slag as a partial replacement for coarse aggregate in M-70 grade concrete. Zeolite powder, possessing pozzolanic properties, is a natural or synthetic aluminosilicate material, while steel slag is an industrial byproduct with potential as an alternative aggregate source. The main objective is to investigate the impact of zeolite powder and steel slag on the development of High-Performance Concrete (M-70) in accordance with Bureau of Indian standards. The formulation of high-performance concrete involved replacing 12.5%, 15%, and 17.5% of the cement with zeolite powder and varying the proportion of steel slag as a replacement for coarse aggregate (ranging from 30% to 55%). A comprehensive mechanical test was conducted on these specimens and compared with conventional concrete. Among the 19 mixes, the optimal combination was identified, incorporating 15% zeolite powder as a cement replacement and 45% steel slag as a coarse aggregate replacement, resulting in superior performance compared to conventional concrete. This mix was further studied for non-destructive testing, and microstructural analysis. Subsequently, the experimental results were compared with predicted outcomes using the Taguchi method. The close alignment between the values obtained experimentally and those predicted further validates the effectiveness of the optimized mix.

Responses of soil microbial community activities and soil physicochemical properties to coal fly ash soil amendment

BackgroundHundreds of millions of tons coal fly ash are produced annually to support economic development and industrial production. However, directly applying coal fly ash to agricultural production can decrease the land productivity and pose a threat to the ecosystem due to the poor physicochemical properties and seriously heavy metal pollution.MethodsIn this study, a field experiment to investigate the effects of coal fly ash as a soil amendment was conducted in Hebei province, China. The coal fly ash (CFA) soil field was mixed with the carrier soil (CS, without containing coal fly ash) at different rates (0–40% mass content) in the 0–20 cm layer of top soil and then mixed with a rotovator. The soil was then amended with 0.45–1.80 kg·m− 2 of G1 soil amendment for planting corn.PurposeThe purpose of this study is to investigate the response mechanism of soil microbial community activities, and soil physicochemical properties to soil amendment and carrier soil in coal fly ash soil.Key resultsThe study found that the G1 amendment, which consisted of humic acid, polyacrylamide, zeolite powder, and FeSO4·7H2O, improved the soil chemical properties and physical structure by increasing soil bulk density and macroaggregates. The highest corn yield was observed in B5 (20% CS and 1.3500 kg·m− 2 G1). Meanwhile, the abundance of microorganisms that facilitate the circulation of soil nutrients such as Acidobacteria (77.05%), Sphingomonas (25.60%), Nitrospira (20.78%), Streptomyces (11.32%), and Gaiella (10.20%) was increased.ConclusionsOverall, our results indicate that the use of coal fly ash soil as a amendment can enhance soil sustainability by improving soil microbial functions. These findings provide a reference for the development and application of coal fly ash soil amendments.

Effective C4 Separation by Zeolite Metal-Organic Framework Composite Membranes.

Inorganic zeolites have excellent molecular sieving properties, but they are difficult to process into macroscopic structures. In this work, we use metal-organic framework (MOF) glass as substrates to engineer the interface with inorganic zeolites, and then assemble the discrete crystalline zeolite powders into monolithic structures. The zeolites are well dispersed and stabilized within the MOF glass matrix, and the monolith has satisfactory mechanical stabilities for membrane applications. We demonstrate the effective separation performance of the membrane for 1,3-butadiene (C4H6) from other C4 hydrocarbons, which is a crucial and challenging separation in the chemical industry. The membrane achieves a high permeance of C4H6 (693.00±21.83 GPU) and a high selectivity over n-butene, n-butane, isobutene, and isobutane (9.72, 9.94, 10.31, and 11.94, respectively). This strategy opens up new possibilities for developing advanced membrane materials for difficult hydrocarbon separations.

Effective C4 Separation by Zeolite Metal–Organic Framework Composite Membranes

AbstractInorganic zeolites have excellent molecular sieving properties, but they are difficult to process into macroscopic structures. In this work, we use metal–organic framework (MOF) glass as substrates to engineer the interface with inorganic zeolites, and then assemble the discrete crystalline zeolite powders into monolithic structures. The zeolites are well dispersed and stabilized within the MOF glass matrix, and the monolith has satisfactory mechanical stabilities for membrane applications. We demonstrate the effective separation performance of the membrane for 1,3‐butadiene (C4H6) from other C4 hydrocarbons, which is a crucial and challenging separation in the chemical industry. The membrane achieves a high permeance of C4H6 (693.00±21.83 GPU) and a high selectivity over n‐butene, n‐butane, isobutene, and isobutane (9.72, 9.94, 10.31, and 11.94, respectively). This strategy opens up new possibilities for developing advanced membrane materials for difficult hydrocarbon separations.

Mechanical Properties of Aeolian Sand Concrete Made from Alkali-Treated Aeolian Sand and Zeolite Powder.

The aim of this study is to promote the application of the excited zeolite powder (ZP)with aeolian sand powder (ASP) in the field of aeolian-sand concrete (ASC) production. This study utilises NaOH to treat composite cementitious materials containing aeolian sand and zeolite powders, which were used to replace 50% of the cement in aeolian-sand concrete (ASC). Production of alkali-inspired cement-based windswept concrete(AAZC).The mechanical properties of treated ASC considerably improved, especially when the NaOH dosage was 4% by mass. After curing this sample (denoted as AAZC-4) for 28 d, its compressive strength improved by 17.2%, and its split tensile increased by 16.3%. Potassium feldspar and montmorillonite in zeolite powder and SiO2 in the sand were decomposed by OH- and combined with other elements to generate various silicate gels and A-type potassium zeolite crystals inside the concrete. Microscopic examination showed that the gels and crystals intertwined to fill the pores, decreasing (increasing) the percentage of large (small) pores, thus optimising the pore structure. This substantially improved the mechanical properties of ASC. Freeze-thaw salt-intrusion tests showed that the extent of mass loss, degree of damage and loss of compressive strength of AAZC-4 were similar to those of ordinary concrete but were reduced by 36.8%, 19% and 52.1%, respectively, compared with those of ASC. Therefore, AAZC-4 has a sustainable working performance in chloride-ion permeable environments in cold and arid areas.

Spherical Binderless 4A/5A Zeolite Assemblies: Synthesis, Characterization, and Adsorbent Applications.

Zeolite microspheres have been successfully applied in commercial-scale separators such as oxygen concentrators. However, further enhancement of their applications is hampered by the post-synthetic shaping process that formulates the zeolite powder into packing-sized spherical bodies with various binders leading to active site blockage and suboptimal performance. Herein, binderless zeolite microspheres with a tunable broad size range from 2 µm to 500 µm have been developed with high crystallinity, sphericity over 92%, monodispersity with a coefficient of variation (CV) less than 5%, and hierarchical pore architecture. Combining precursor impregnation and steam-assisted crystallization (SAC), mesoporous silica microspheres with a wide size range could be successfully transformed into zeolite. For preserved size and spherical morphology, a judicious selection of the synthesis conditions is crucial to ensure a pure phase, high crystallinity, and hierarchical architecture. For the sub-2-µm zeolite microsphere, low-temperature prolonged aging was important so as to suppress external zeolization that led to a large, single macroporous crystal. For the large 500 µm sphere, ultrasound pretreatment and vacuum impregnation were crucial and facilitated spatially uniform gel matrix dispersion and homogenous crystallization. The obtained zeolite 5A microspheres exhibited excellent air separation performance, while the 4A microspheres displayed ammonium removal capabilities. This work provides a general strategy to overcome the existing limitations in fabricating binder-free technical bodies of zeolites for various applications.

A preliminary study on preparation and properties of magnesia based clinker with zeolite and magnesite

Dead burnt magnesia is the main raw material of magnesium phosphate cement, which is widely used in road repair works. However, due to the high energy consumption and high cost in the production and preparation process of dead burnt magnesia, its application is limited to a certain extent. In this work, a magnesia based clinker containing a considerable number of magnesium oxide and magnesium silicates phase was prepared by co-firing of zeolite powder and magnesite at low temperature (1200–1300 ℃). The results show that high temperature than 1200℃ results in less free MgO. Intermediate phases 2CaO·MgO·2SiO2 formed in clinker at 1250℃ and 1300℃. The workability of the pastes made from calcined cement clinker was proved to be better than that of traditional magnesium potassium phosphate cement (MKPC). The compressive strength can reach 30 MPa after curing for 7 days. Compared with the traditional MKPC, the hydration heat of the new magnesia based cement is greatly reduced. Lower calcination temperature on the cement clinker resulted in fewer cracks and pores on the surface of magnesia based cement and denser structure of the hydration products.

Adsorption of ammonium ion (NH4+) using mordenite-chitosan from synthetic and actual sewage: Batch and fixed-bed studies

The untapped NH4+ in sewage has the potential to be recovered as fertilizer via the adsorption process. While zeolite-chitosan has demonstrated better performance in nutrient recovery compared to powder zeolite, research on mordenite-chitosan remains limited. Therefore, this study focused on the mordenite-chitosan for NH4+ recovery. Based on the characterization, the physicochemical properties of mordenite-chitosan closely resemble the mordenite. The addition of chitosan has increased the adsorption capacity of mordenite by 15%. The adsorption of NH4+ on mordenite-chitosan fitted well to the Langmuir linear model with an estimated adsorption capacity of 17.7 mg/g (R2 = 0.991). The positive entropy with an enthalpy value of 44.47 kJ/mol suggests a random organization of NH4+ ions, endothermic process, and ion-exchange. Mordenite-chitosan adhered well to the Thomas model, with NH4+ adsorption capacity of 17.97 mg/g, 6.14 mg/g, and 4.84 mg/g in synthetic sewage, influent, and effluent, respectively. Factors such as the negativity of the surface mordenite-chitosan, Si/Al ratio, and framework flexibility are likely to influence the NH4+ adsorption capacity. Overall, the ion-exchange property of mordenite-chitosan emerges as the main contributor to its efficacy in NH4+ recovery.

Mechanical performances, chloride permeability, and microstructure of wollastonite microfiber reinforced cement-based composite incorporated with zeolite powder

Wollastonite microfiber (WM) with a unique fiber structure and zeolite powder (ZP) with a high pozzolanic effect can improve the performances of cement-based composite owing to the same calcium silicate system. This study aimed to analyze the effects of WM and ZP on the properties of cement-based composite by compressive test, flexural test, shear test, rapid chloride migration (RCM) test, fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), mercury intrusion porosimetery (MIP) and scanning electron microscopy (SEM). Results showed that utilizing WM and ZP was found to be beneficial for improving mechanical performances and impermeability. WM had a more significant effect on enhancing flexural and shear properties, which can be attributed to the fact that the WM as a fibrous structure could provide skeleton support and bridging crack resistance in the matrix, and an addition of 5% WM (by mass) in the matrix could increase the 60-day flexural strength, shear strength and tensile strength by 24%, 13% and 4%. Additionally, ZP had a more significant impact on improving the late compressive strength and chloride permeability because of the particle filling effect and pozzolanic effect. The pozzolanic ingredient (such as active SiO2 and Al2O3) in ZP can take secondary hydration reaction with Ca(OH)2 to produce C–S(A)-H, this can refine the pore size and reduce the porosity, especially for the large pore.