Zebra Stripes Research Articles

Evolution of electron “zebra stripes” in the South Atlantic Anomaly: Initial observations from Macao Science Satellite-1

Evolution of electron “zebra stripes” in the South Atlantic Anomaly: Initial observations from Macao Science Satellite-1

Three-Dimensional Reconstruction of Zebra Crossings in Vehicle-Mounted LiDAR Point Clouds

In the production of high-definition maps, it is necessary to achieve the three-dimensional instantiation of road furniture that is difficult to depict on traditional maps. The development of mobile laser measurement technology provides a new means for acquiring road furniture data. To address the issue of traffic marking extraction accuracy in practical production, which is affected by degradation, occlusion, and non-standard variations, this paper proposes a 3D reconstruction method based on energy functions and template matching, using zebra crossings in vehicle-mounted LiDAR point clouds as an example. First, regions of interest (RoIs) containing zebra crossings are obtained through manual selection. Candidate point sets are then obtained at fixed distances, and their neighborhood intensity features are calculated to determine the number of zebra stripes using non-maximum suppression. Next, the slice intensity feature of each zebra stripe is calculated, followed by outlier filtering to determine the optimized length. Finally, a matching template is selected, and an energy function composed of the average intensity of the point cloud within the template, the intensity information entropy, and the intensity gradient at the template boundary is constructed. The 3D reconstruction result is obtained by solving the energy function, performing mode statistics, and normalization. This method enables the complete 3D reconstruction of zebra stripes within the RoI, maintaining an average planar corner accuracy within 0.05 m and an elevation accuracy within 0.02 m. The matching and reconstruction time does not exceed 1 s, and it has been applied in practical production.

How the zebra got its stripes: Curvature-dependent diffusion orients Turing patterns on three-dimensional surfaces.

Many animals have patterned fur, feathers, or scales, such as the stripes of a zebra. Turing models, or reaction-diffusion systems, are a class of mathematical models of interacting species that have been successfully used to generate animal-like patterns for many species. When diffusion of the inhibitor is high enough relative to the activator, a diffusion-driven instability can spontaneously form patterns. However, it is not just the type of pattern but also the orientation that matters, and it remains unclear how patterns are oriented in practice. Here, we propose a mechanism by which the curvature of the surface influences the rate of diffusion, and can recapture the correct orientation of stripes on models of a zebra and of a cat in numerical simulations. Previous work has shown how anisotropic diffusion can give stripe forming reaction-diffusion systems a bias in orientation. From the observation that zebra stripes run around the direction of highest curvature, that is around the torso and legs, we apply this result by modifying the anisotropic diffusion rates based on the local curvature. These results show how local geometry can influence the reaction dynamics to give robust, global-scale patterns. Overall, this model proposes a coupling between the system geometry and reaction-diffusion dynamics that can give global control over the patterning by using only local curvature information. Such a model can give shape and positioning information in animal development without the need for spatially dependent morphogen gradients.

In silico investigation of the formation of multiple intense zebra stripes using extending domain

We perform an in silico investigation of the formation of multiple intense zebra stripes by extending the domain with an appropriate extending speed. The common zebra has alternating dark and light stripes, creating a two phase pattern. However, some Equus burchelli zebras have an intermediate gray color stripe situated between the dark and light stripes. To numerically investigate the formation of multiple intense zebra stripes, we first find the equilibrium state of the governing system in the one-dimensional (1D) static domains using various frequency modes. After finding the equilibrium state for the governing system in the 1D static domains, we stack a numerical data. Then, we load the stacked numerical data to use as an initial state for finding the growth rate that forms the multiple intense zebra stripe formation in the 1D extended domains. Next, convergence experiments are conducted to verify the convergence of the numerical method for the governing system. Finally, numerical simulations are performed to confirm the formation of multiple intense zebra stripes in two-dimensional extending domains and on evolving curved surfaces.

MFAFNet: An innovative crack intelligent segmentation method based on multi-layer feature association fusion network

The regular and timely detection and segmentation of cracks in asphalt pavements is very important for road evaluation. However, certain problems remain to be solved, such as the difficulty of crack detection under interference from zebra stripes and dark light. A novel intelligent crack segmentation method based on a multi-layer feature association fusion network (MFAFNet) is therefore proposed in this study. Firstly, a fusion convolution with a Transformer called a feature coupling encoder (FC-Encoder) is developed in MFAFNet to enhance the model's global feature awareness and ability to capture local details. Secondly, a two-branch feature association module (TFBA-module) is proposed to obtain strong correlation information for global and local features. Next, a hybrid MLP architecture for lightweight feature decoder (H-MLP Decoder) is constructed to achieve feature recombination of the multi-level fusion information. The accuracy of crack segmentation under interference from zebra stripes and dark light is improved through the use of these three modules. Our model is compared with some well-known existing segmentation networks such as U-Net, DeepLabv3+, PSPNet, HRNet and SegFormer, and the segmentation accuracy, F1-score and IoU of the proposed MFAFNet are found to be 94.39 %, 93.26 % and 89.46 %, respectively. In addition, the segmentation efficiency reaches 21.87FPS. Our experimental results show that the proposed MFAFNet yields more effective performance in the field of asphalt pavement crack segmentation than the alternatives.

Archimedean Spiral Distribution of Energetic Particles in Earth's Inner Radiation Belt

AbstractArchimedean spirals are common in various fields such as biology, engineering, astronomy, and space physics. Here we report the discovery of patterns resembling the general Archimedean spirals in particle distributions in the Earth radiation belt. Our analytic theory and numerical simulations demonstrate that electrons with initially asymmetric spatial distributions form such spirals in the inner magnetosphere, where particles at smaller radial distances move more slowly in angular velocity. These spirals result in time‐varying peaks and valleys in particle fluxes, referred to as “zebra stripes,” which are well consistent with Van Allen Probes measurements. Although the initial asymmetric distribution may be seeded by the electric field in the magnetosphere, the spiral formation does not require them. Furthermore, we show that, due to the same fundamental motion of charged particles in regions dominated by dipole fields, this spiral phenomenon may also appear in the proton distributions, as well as in planetary magnetospheres.

Intensification of the Electron Zebra Stripes in the Earth's Inner Magnetosphere During Geomagnetic Storms

AbstractWe examined rapid variations in the electron zebra stripe patterns, specifically at L = 1.5, over a three‐month duration, using twin Van Allen Probes within Earth's inner magnetosphere. During geomagnetically quiet intervals, these stripes exhibit a peak‐to‐valley ratio (Δj) ∼1.25 in detrended electron fluxes. However, during geomagnetic storms, they became highly prominent, with Δj > 2.5. The correlation between Δj and net field‐aligned currents (FACs) is observed to be high (0.70). Global magnetohydrodynamic (MHD) simulation results indicate that the westward electric field at midnight at low latitudes in the deep inner magnetosphere correlates well with net FACs. An increase in net FACs could amplify the dawn‐to‐dusk electric field in the deep inner magnetosphere, thereby causing the inward transport of electrons. Given that FACs are linked to the interaction between solar wind and the magnetosphere, our findings emphasize the importance of solar wind‐magnetosphere coupling in the deeper regions of the inner magnetosphere.

The Effect of Visual Aids on Reading Numeric Data Tables.

Data tables are one of the most common ways in which people encounter data. Although mostly built with text and numbers, data tables have a spatial layout and often exhibit visual elements meant to facilitate their reading. Surprisingly, there is an empirical knowledge gap on how people read tables and how different visual aids affect people's reading of tables. In this work, we seek to address this vacuum through a controlled study. We asked participants to repeatedly perform four different tasks with four table representation conditions (plain tables, tables with zebra striping, tables with cell background color encoding cell value, and tables with in-cell bars with lengths encoding cell value). We analyzed completion time, error rate, gaze-tracking data, mouse movement and participant preferences. We found that color and bar encodings help for finding maximum values. For a more complex task (comparison of proportional differences) color and bar helped less than zebra striping. We also characterize typical human behavior for the four tasks. These findings inform the design of tables and research directions for improving presentation of data in tabular form.

Procedure to improve the surface fidelity of additive manufactured parts via direct slicing tessellation

Part appearance issues due to dimensional and shape inaccuracies (fidelity) hinder the use of additive manufacturing processes to obtain final products. Inaccuracies come from process parameter definition, post-processing operations, and the slicing process. Regarding the slicing procedure, the conventional approach is the indirect slicing of a tessellation that approximates the part model. Layer computation is straightforward in this method but introduces dimensional deviations for curvilinear surfaces. Direct slicing minimizes these deviations, but computation and layer representation are complex. This work blends both solutions, explaining how to build an improved tessellation from direct slices that can be introduced and processed in usual slicing programs. Two shapes , a simple hemisphere and a component of a retail product (a hair dryer nozzle), were printed by Fused Filament Fabrication (FFF), using conventional indirect slicing with different tessellation’s resolutions and the proposed Direct Slicing Tessellation (DST). The resulting samples were measured using a 3D scanner. Compared with a reference sample printed from a Computer-Aided Design (CAD) model discretized with a tolerance <6μm, maximum deviations were found on more areas of conventional indirect samples and with higher values (from 0.13 to 0.16 mm) than in the case of the DST samples (with maximum deviation of 0.1 mm at few points on the surface). Additionally, DST files are around ten times smaller than reference files. Finally, the deviation between the CAD model and the representation on the resulting surfaces of zebra stripes and mean curvature show that the proposed solution enhances the printed surface fidelity compared to the conventional indirect slicing.

Radial Transport in the Earth’s Radiation Belts: Linear, Quasi-linear, and Higher-order Processes

Observational studies of the Earth’s radiation belts indicate that Alfvénic fluctuations in the frequency range of 2–25 mHz accelerate electrons to relativistic energies. For decades, statistical models of radiation belts have quantified the impact of Alfvénic waves in terms of quasi-linear diffusion. However, quasi-linear models are inadequate to quantify Alfvénic radial transport occurring on timescales comparable to the azimuthal drift period of 0.1–10 MeV electrons. With recent advances in observational methodologies offering coverage of the Earth’s radiation belts on fast timescales, a theoretical framework that distinguishes between fast and diffusive radial transport can be tested for the first time in situ. In this report, we present a drift-kinetic description of radial transport for planetary radiation belts. We characterize fast linear processes and determine the conditions under which higher-order effects become dynamically significant. In the linear regime, wave–particle interactions are categorized in terms of resonant and nonresonant responses. We demonstrate that the phenomenon of zebra stripes is nonresonant and can originate from injection events in the inner radiation belts. We derive a radial diffusion coefficient for a field model that satisfies Faraday’s law and that contains two terms: one scaling as L 10 independent of the azimuthal number m, and a second scaling as m 2 L 6. In the higher-order regime, azimuthally symmetric waves with properties consistent with in situ measurements can energize 10–100 keV electrons in less than a drift period. This process provides new evidence that acceleration by Alfvénic waves in radiation belts cannot be fully contained within diffusive models.

Uniform patterns formation based on Gray-Scott model for 3D printing

The Gray-Scott model is a typical reaction-diffusion system, which describes the process of two chemicals transforming into each other and diffusing in space. Based on the Gray-Scott model, we explore the practical application of Gray-Scott model to form patterns on two-dimensional (2D) images and three-dimensional (3D) surfaces. The results present that Gray-Scott model can form uniform patterns and simulate the generation of zebra stripes on 2D domains. On the surfaces of 3D objects, we observe that the supply rate F affects the size of the formed patterns and the shapes of which are uniform. Based on Gray-Scott model, uniform patterns can be obtained on 3D surface, which is suitable for 3D hollow printing.

Effect of proppant sizes and injection modes on proppant transportation and distribution in the tortuous fracture model

Particle-fluid transport and placement mechanism in tortuous fracture played a crucial role in unconventional reservoirs. Currently, most studies focused on mono-size proppant with fluid transport processes in tortuous fractures. However, the mixture-size proppant with fluid movement mechanism in tortuous fracture was still uncommon. Therefore, this study designed and applied a series of experiments with a physical analog model of a tortuous fracture with 120° and 90°-angled bends and combined high-speed camera-based equipment. This experimental system was used to track different-mixture-sized proppant particle motion trajectories for a series of proppant injection schemes; The following conclusions were drawn from this study:1. The pile-up processes mechanism in all investigated schemes were similar and could be reduced to four main stages. 2. The packing structure at both sides of the fracture wall had different variation rates, which were controlled by the mix ratio (change from 1:1–1:5) of proppant size. 3. Some new packing patterns, such as Zebra Stripe, had occurred, controlled by the different proppant injection sequences. 4. Small-sized mono-proppant (30/50 mesh) had the highest transport efficiency in the tortuous fracture, followed by the mixed-sized multi-proppant (10/20 mesh:30/50 mesh), large-sized proppant (10/20 mesh) was the worst. 5. An optimized alternating injection mode was recommended as injecting small-sized proppant first (30/50 mesh) and followed by mixed-sized multi-proppant (10/20 mesh:30/50 mesh), which could contribute to obtaining the optimal both proppant packing height and travel distance in tortuous fracture.6. Two correlations were developed for predicting the proppant packing height and transportation distance.

Formation of Electron Zebra Stripes Observed on 8 September 2017

AbstractZebra stripes are the characteristic structures having repeated hills and valleys in the electron flux intensities observed below L = 3. We delineate the fundamental properties and evolution of electron zebra stripes by modeling advection using time‐dependent electric fields provided by a global magnetohydrodynamics simulation. At the beginning of the simulation, the electrons were uniformly distributed in longitude. Some electrons moved inward due to enhanced westward electric field transients in the premidnight‐postdawn region. The inwardly displaced electrons were confined in a narrow longitudinal range and underwent grad‐B and curvature drifts. For any specific fixed position, the electrons periodically passed through the point with an energy dependent period, giving rise to the hills and valleys in the electron differential flux also known as zebra stripes. The valleys of the zebra stripes are composed of the electrons that underwent outward displacement, or no significant radial displacement. On the nightside, the duskside convection cell is skewed toward dawn in the equatorward of the auroral oval, and the westward electric field becomes dominant in the postdawn region, which results in the inward motion of the electrons. The spatial distribution of the westward electric field is consistent with observation. Zebra stripes are a mixture of the electrons that have and have not experienced inward transport due to solar wind‐inner magnetosphere coupling by way of the ionosphere.

Pathogenesis of wild-type- and vaccine-based recombinant peste des petits ruminants virus (PPRV) expressing EGFP in experimentally infected domestic goats.

Peste des petits ruminants virus (PPRV) is a highly contagious morbillivirus related to measles and canine distemper virus, mostly affecting small ruminants. The corresponding PPR disease has a high clinical impact in goats and is characterized by fever, oral and nasal erosions, diarrhoea and pneumonia. In addition, massive infection of lymphoid tissues causes lymphopaenia and immune suppression. This results in increased susceptibility to secondary bacterial infections, explaining the observed high mortality in some outbreaks. We studied the pathogenesis of PPR by experimental inoculation of Dutch domestic goats with a recombinant virulent PPRV strain modified to express EGFP and compared it to an EGFP-expressing vaccine strain of PPRV. After intratracheal inoculation with virulent PPRV, animals developed fever, viraemia and leucopaenia, and shed virus from the respiratory and gastro-intestinal tracts. Macroscopic evaluation of fluorescence at the peak of infection 7 days post-inoculation (dpi) showed prominent PPRV infection of the respiratory tract, lymphoid tissues, gastro-intestinal tract, mucosae and skin. Flow cytometry of PBMCs collected over time demonstrated a cell-associated viraemia mediated by infected lymphocytes. At 14 dpi, pathognomonic zebra stripes were detected in the mucosa of the large intestine. In contrast, vaccine strain-inoculated goats remained largely macroscopically fluorescence negative and did not present clinical signs. A low-level viraemia was detected by flow cytometry, but at necropsy no histological lesions were observed. Animals from both groups seroconverted as early as 7 dpi and sera efficiently neutralized virulent PPRV in vitro. Combined, this work presents a study of the pathogenesis of wild type- and vaccine-based PPRV in its natural host. This study shows the strength of recombinant EGFP-expressing viruses in fluorescence-guided pathogenesis studies.

Zebra-inspired stretchable, biodegradable radiation modulator for all-day sustainable energy harvesters.

Recent advances in passive radiative cooling systems describe a variety of strategies to enhance cooling efficiency, while the integration of such technology with a bioinspired design using biodegradable materials can offer a research opportunity to generate energy in a sustainable manner, favorable for the temperature/climate system of the planet. Here, we introduce stretchable and ecoresorbable radiative cooling/heating systems engineered with zebra stripe-like patterns that enable the generation of a large in-plane temperature gradient for thermoelectric generation. A comprehensive study of materials with theoretical evaluations validates the ability to accomplish the target performances even under external mechanical strains, while all systems eventually disappear under physiological conditions. Use of the zebra print for selective radiative heating demonstrates an unexpected level of temperature difference compared to use of radiative cooling emitters alone, which enables producing energy through resorbable silicon-based thermoelectric devices. The overall result suggests the potential of scalable, ecofriendly renewable energy systems.

The ‘roaring’ twenties and African wildlife in fashionable dress: Part 1: Zebra fur patterns and femininity

The fur and fur patterns of African animals were part of the fashion industry’s exoticization of Africa during the 1920s. Avant-garde interest in African sculpture, African textiles and African jewellery blended with the popularity of jazz music played by African Americans to create a market for fashionable clothing inspired by Africa. Using fur from African animals, and textile prints and embroideries imitating fur patterns, reflected the most consistent interest in Africa. African safaris, world fairs and colonial expositions displaying African animals contributed to African exoticism. Books for children, textile designs illustrating African elephants and examples of fabric dyed colours called ‘lioness’ were some of the resulting consumer products. The graphic fur patterns of leopards, giraffes and zebras perfectly suited the bold geometric aesthetics of the Arts Modernes design style, while the fringe-like quality of monkey fur met the trend requirements for fringed evening wear. Zebra fur and patterns played a feminizing role in mediating the increasingly masculine dress and activities for women. The graphic black-and-white stripes linked the wearer to the exotics and adventure of Africa, while also reflecting contemporary design aesthetics and the hard-edged, chaotic American city. Because the zebra stripe originates on the fur of a peaceful prey animal, the pattern was perceived as graceful and feminine. For the modern women who wanted to participate in the adventures of the era, wearing zebra stripes tempered the interpretation of her wild life in the American urban jungle without compromising her femininity.

Dynamics of the inner electron radiation belt: A review

The Van Allen radiation belts are an extraordinary science discovery in the Earth magnetosphere and consist of two electron belts. The inner Van Allen belt contains electrons of 10s to 100s keV; the outer belt consists mainly of 0.1−10 MeV electrons. Their dynamics have been analyzed for decades. The newly-launched Van Allen Probes provide unprecedented opportunities to investigate the inner belt more thoroughly. Data from this advanced mission have allowed scientists to demonstrate that the inner belt was formed not only through inward transport of outer belt electrons but Cosmic Ray Albedo Neutron Decay (CRAND) has also played an important role. In addition, the inner belt electrons show energy-dependent variations and present “zebra stripe” structures in the energy spectrum. At the same time, scientists have further confirmed that the electrons in the inner radiation belt get lost through coulomb collision and wave-particle interaction. Despite these advances, important questions remain unanswered and require further investigation. The launch of Macau ScienceSatellite-1 mission, with its low inclination angle and low altitude orbit, will provide advanced radiation belt data for better understanding of the structure and dynamics of the inner electron radiation belt.

Blood-seeking horseflies prefer vessel-imitating temperature gradients on host-mimicking targets: Experimental corroboration of a new explanation of the visual unattractiveness of zebras to tabanids

Several hypotheses tried to explain the advantages of zebra stripes. According to the most recent explanation, since the borderlines of sunlit white and black stripes can hamper thermal vessel detection by blood-seeking female horseflies, striped host animals are unattractive to these parasites which prefer hosts with a homogeneous coat, on which the temperature gradients above blood vessels can be detected more easily. This hypothesis has been tested in a field experiment with horseflies walking on a grey barrel with thin black stripes which were slightly warmer than their grey surroundings in sunshine, while in shade both areas had practically the same temperature. To eliminate the multiple (optical and thermal) cues of this test target, we repeated this experiment with improved test surfaces: we attracted horseflies by water- or host-imitating homogeneous black test surfaces, beneath which a heatable wire ran. When heated, this invisible and mechanically impalpable wire imitated thermally the slightly warmer subsurface blood vessels, otherwise it was thermally imperceptible. We measured the times spent by landed and walking horseflies on the test surface parts with and without underlying heated or unheated wire. We found that walking female and male horseflies had no preference for any (wired or wireless) area of the water-imitating horizontal plane test surface on the ground, independent of the temperature (heated or unheated) of the underlying wire. These horseflies looked for water, rather than a host. On the other hand, in the case of host-imitating test surfaces, female horseflies preferred the thin surface regions above the wire only if it was heated and thus warmer than its surroundings. This behaviour can be explained exclusively with the higher temperature of the wire given the lack of other sensorial cues. Our results prove the thermal vessel recognition of female horseflies and support the idea that sunlit zebra stripes impede the thermal detection of a host‘s vessels by blood-seeking horseflies, the consequence of which is the visual (non-thermal) unattractiveness of zebras to horseflies.

Zebras of all stripes repel biting flies at close range

The best-supported hypothesis for why zebras have stripes is that stripes repel biting flies. While this effect is well-established, the mechanism behind it remains elusive. Myriad hypotheses have been suggested, but few experiments have helped narrow the field of possible explanations. In addition, the complex visual features of real zebra pelage and the natural range of stripe widths have been largely left out of experimental designs. In paired-choice field experiments in a Kenyan savannah, we found that hungry Stomoxys flies released in an enclosure strongly preferred to land on uniform tan impala pelts over striped zebra pelts but exhibited no preference between the pelts of the zebra species with the widest stripes and the narrowest stripes. Our findings confirm that zebra stripes repel biting flies under naturalistic conditions and do so at close range (suggesting that several of the mechanisms hypothesized to operate at a distance are unnecessary for the fly-repulsion effect) but indicate that interspecific variation in stripe width is associated with selection pressures other than biting flies.

Sunlit zebra stripes may confuse the thermal perception of blood vessels causing the visual unattractiveness of zebras to horseflies

Multiple hypotheses have been proposed for possible functions of zebra stripes. The most thoroughly experimentally supported advantage of zebra stripes is their visual unattractiveness to horseflies (tabanids) and tsetse flies. We propose here a plausible hypothesis why biting horseflies avoid host animals with striped pelages: in sunshine the temperature gradients of the skin above the slightly warmer blood vessels are difficult to distinguish from the temperature gradients induced by the hairs at the borderlines of warmer black and cooler white stripes. To test this hypothesis, we performed a field experiment with tabanids walking on a host-imitating grey test target with vessel-mimicking thin black stripes which were slightly warmer than their grey surroundings in sunshine, while under shady conditions both areas had practically the same temperature as demonstrated by thermography. We found that horseflies spend more time walking on thin black stripes than surrounding grey areas as expected by chance, but only when the substrate is sunlit. This is because the black stripes are warmer than the surrounding grey areas in the sun, but not in the shade. This is consistent with the flies’ well-documented attraction to warmer temperatures and provides indirect support for the proposed hypothesis. The frequent false vessel locations at the numerous black–white borderlines, the subsequent painful bitings with unsuccessful blood-sucking attempts and the host’s fly-repellent reactions enhance considerably the chance that horseflies cannot evade host responses and are swatted by them. To eliminate this risk, a good evolutionary strategy was the avoidance of striped (and spotted) host animals.