Xishanyao Formation Research Articles

Leaf phenology and paleoclimatic and paleoenvironmental insights derived from Yiwupitys elegans of the Yiwu Jurassic Forest, Xinjiang, China

Many permineralized conifer stems and trunks have been documented from the Jurassic strata of the Xinjiang Uygur Autonomous Region (Xinjiang), Northwest China. Xylem anatomical studies have showed that these stems and trunks belonged to a diverse range of plants. However, the leaf phenology and the paleoclimatic and paleoenvironmental significance of these fossil plants have rarely been studied. We quantitatively analyzed the anatomical characteristics of a permineralized conifer stem—Yiwupitys elegans Gou et Feng 2023—from the Middle Jurassic Xishanyao Formation in northeastern Xinjiang, which has distinct and wide growth rings in the secondary xylem. Analyses of the Mean Sensitivity and Ring Markedness Index of the growth rings suggest that a stable paleoclimate with regular seasonal fructifications likely prevailed during the Middle Jurassic in this area. The statistical analyses of cell diameters and anatomical features of leaf traces in six successive growth rings indicate that this fossil plant was deciduous. Our study elucidates the ecophysiological characteristics of a Middle Jurassic conifer plant and provides new insights into the corresponding paleoclimate and paleoenvironment based on quantitative cellular analysis of the fossil stem.

Geochemistry of Middle Jurassic Coals from the Dananhu Mine, Xinjiang: Emphasis on Sediment Source and Control Factors of Critical Metals

In recent years, coal-type critical metal deposits have become a research hotspot in coal geology. As a major coal-accumulating basin in the Xinjiang area, the Turpan-Hami Basin contains abundant coal resources and has the potential to become a large coal-type critical metal deposit. However, previous studies on the enrichment characteristics of critical metal elements in coal are few and need further research. Based on SEM-EDS, XRF, and ICP-MS experiments, this study investigates the coal petrology, mineralogy, and geochemistry of the No. 22 coal of the Xishanyao Formation from the Dananhu Coal Mine, Xinjiang, to identify the sediment source, depositional environment, and controlling factors of the critical metal elements of the No. 22 coal. The results showed that the Dananhu coals are characterized by a low ash yield, low total sulfur content, high volatile yield, and high inertinite proportions. Quartz, kaolinite, and illite are the main minerals in the coal. Compared with the world’s low-rank coals, Ni, Co, Mo, and Ta are slightly enriched, Li, Rb, Cs, Ba, Tl, Bi, and Ge are depleted, and the concentrations of other trace elements are comparable to the average values of the world’s low-rank coals. The REY of the Dannanhu coals exhibited high fractionation, with its enrichment patterns characterized by the H-type and M-H-type. Although most of the critical metals are not enriched in the Dannanhu coals, the Ga, Zr (Hf), and Nb (Ta) concentrations in the coal ash of the Dannanhu coals have reached the economic cut-off grade and have the potential to be a substitute for rare metal resources. The terrigenous detrital sources of the Dannanhu coals mainly come from the Paleozoic dacite, andesite, and a small amount of granite from the Harik Mountain and Eastern Bogda Mountain in the Turpan-Hami Basin. The Dannanhu coals are generally in a dry and hot depositional environment, with high salinity and weak reduction-oxidation. The low source input and weak reduction-oxidation environment have resulted in low concentrations of critical metal of the No. 22 coal from the Dananhu Coal Mine.

Palynological Record of the Aalenian–Bajocian Cooling Event from the Santanghu Basin, Northwest China

The Aalenian–Bajocian (early Middle Jurassic) cooling event (ABCE) was a significant global climate disturbance during the Jurassic. Our analysis of sporopollen fossils from 18 mudstone and silty mudstone samples, collected from the lacustrine-terrestrial succession Xishanyao Formation in the Santanghu Basin, Northwest China, revealed a total of 191 species belonging to 53 genera. We identified an assemblage, the Cyathidites–Deltoidospora–Osmundacidites–Cycadopites assemblage, which dates to the Aalenian–Bajocian (early Middle Jurassic). This assemblage can be further divided into three subassemblages in stratigraphic order: the Cyathidites–Osmundacidites–Cycadopites subassemblage, the Cyathidites–Cycadopites–Psophosphaera subassemblage, and the Cyathidites–Deltoidospora–Osmundacidites subassemblage. We applied the Sporomorph EcoGroup (SEG) model to interpret the paleoclimate features. The sporopollen fossils indicate that the Santanghu Basin underwent a shift in vegetation types, from ground cover vegetation as the dominant form to canopy trees and then back to ground cover vegetation as the primary vegetation during the Aalenian–Bajocian. The SEG model analysis demonstrates that the CCP subassemblage is characterized by a low lowland SEG/upland SEG ratio, low wetter/drier ratio within the lowland SEG, and a low warmer/cooler ratio within the lowland SEG. These characteristics reflect the vegetation’s response to the ABCE in the Santanghu Basin.

Extensive carbon cycle between peatland and vegetation: Insights from high net primary productivity of the Middle Jurassic in northwestern China

Peatlands have obvious carbon storage capacity and are crucial in mitigating global climate change. As the end-product of peatlands, coals have preserved a large amount of palaeoenvironmental information. The carbon accumulation rate and the net primary productivity (NPP) of coal-forming peatlands can be used as proxies for recovering palaeoenvironments. A super-thick coal seam (42°35′N, 91°25′E) was developed in the Middle Jurassic Xishanyao Formation in the Shaerhu coalfield in the southern margin of the Tuha (Turpan-Hami) Basin, northwestern China. In this study, we use the time series analysis to identify the periods of Milankovitch orbital cycles in the Gamma-ray curve of this super-thick (124.85 m) coal and then use the obtained cycle periods of 405 ka, 173 ka, 44 ka, 37.6 ka, 22.5 ka to calculate the timeframe of the coal-forming peatlands which ranges from 2703.44 to 2975.11 ka. Considering that the carbon content of the coal seam is 78.32% and the carbon loss during the coalification is about 25.80%, the carbon accumulation rate of the targeted coal seam is estimated to be 58.47–64.34 g C/m2·a, and the NPP is estimated to be 252.28–277.63 g C/m2·a. The main palaeoenvironmental factors controlling the NPP of peatlands are CO2 content, palaeolatitude and palaeotemperature. The reduced NPP values of the palaeo-peatlands in the Shaerhu coalfield can be attributed to the mid-palaeolatitude and/or too low atmospheric CO2 contents. To a certain extent, the NPP of palaeo-peatlands reflects the changes in atmospheric CO2, which can further reveal the dynamic response of the global carbon cycle to climate change. Therefore, predicting the level of NPP in the Middle Jurassic and studying the final destination of carbon in the ecosystem are beneficial to understanding the coal-forming process and palaeoenvironment.

Whole petroleum system in Jurassic coal measures of Taibei Sag in Tuha Basin, NW China

Based on the latest results of near-source exploration in the Middle and Lower Jurassic of the Tuha Basin, a new understanding of the source rocks, reservoir conditions, and source-reservoir-cap rock combinations of the Jurassic Shuixigou Group in the Taibei Sag is established using the concept of the whole petroleum system, and the coal-measure whole petroleum system is analyzed thoroughly. The results are obtained in three aspects. First, the coal-measure source rocks of the Badaowan Formation and Xishanyao Formation and the argillaceous source rocks of the Sangonghe Formation in the Shuixigou Group exhibit the characteristics of long-term hydrocarbon generation, multiple hydrocarbon generation peaks, and simultaneous oil and gas generation, providing sufficient oil and gas sources for the whole petroleum system in the Jurassic coal-bearing basin. Second, multi-phase shallow braided river delta–shallow lacustrine deposits contribute multiple types of reservoirs, e.g. sandstone, tight sandstone, shale and coal rock, in slope and depression areas, providing effective storage space for the petroleum reservoir formation in coal-measure strata. Third, three phases of hydrocarbon charging and structural evolution, as well as effective configuration of multiple types of reservoirs, result in the sequential accumulation of conventional-unconventional hydrocarbons. From high structural positions to depression, there are conventional structural and structural-lithological reservoirs far from the source, low-saturation structural-lithological reservoirs near the source, and tight sandstone gas, coal rock gas and shale oil accumulations within the source. Typically, the tight sandstone gas and coal rock gas are the key options for further exploration, and the shale oil and gas in the depression area is worth of more attention. The new understanding of the whole petroleum system in the coal measures could further enrich and improve the geological theory of the whole petroleum system, and provide new ideas for the overall exploration of oil and gas resources in the Tuha Basin.

Investigation of Hydrocarbon Generation from Jurassic Coal Measures in the Southern Junggar Basin, Northwestern China, Using Closed-System Pyrolysis.

There are several sets of coal-bearing source rocks within the Lower and Middle Jurassic (J1-2) in the southern Junggar sub-basin. To obtain a comprehensive understanding of hydrocarbon generation and the amount of potentially generated natural gas, Rock-Eval analysis was conducted on source rock samples to assess their kerogen types and quality. At the same time, maceral observation and gold-tube pyrolysis were carried out to quantify the different maceral groups and to predict the gas potential, respectively. The Rock-Eval data indicate that the investigated samples are dominated by type III kerogen and occasionally supplemented with type II kerogen. Among the six immature source rocks selected for gold-tube pyrolysis, they are vitrinite-dominated except for a dark mudstone from the Badaowan Formation that is liptinite-dominated. A positive relationship between the maximum gas yield and the liptinite content was observed. However, the accuracy of liptinite content estimation largely depends on the experience level of the organic petrographer. The optimized C1-5 generation activation energies for the six source rocks cover a broad range between 50 and 74 kcal/mol. A relatively larger proportion of higher activation energies (74 kcal/mol) for the carbonaceous mudstone from the Badaowan Formation and also for the dark mudstone from the Sangonghe Formation implies late gas generation. Under geological conditions, the modeled gas conversion from J1-2 source rocks in the central part of the southern Junggar sub-basin ranged from 52 to 74%, indicating good exploration potential. Notably, the computed gas generation from the dark mudstone from the Sangonghe Formation resembles that from the Xishanyao Formation. Gas generation from the Sangonghe Formation should be considered in the future.

Porosity Characteristics of Coal Seams and the Control Mechanisms of Coal Petrology in the Xishanyao Formation in the Western Part of the Southern Junggar Basin

The porosity characteristics of coal seams serve as a pivotal factor in assessing the development potential of coalbed methane (CBM) resources, significantly influencing the adsorption and permeability capabilities of coal reservoirs, as well as the accumulation, entrapment, and preservation of CBM. In this study, we focused on the coal seams of the Xishanyao Formation in the western part of the southern Junggar Basin (NW China). By leveraging the complementarity of nuclear magnetic resonance (NMR), low-temperature liquid nitrogen experiments, and high-pressure mercury intrusion porosimetry (MIP) in spatial exploration range and precision, we conducted a comprehensive analysis to achieve a fine description of porosity characteristics. Furthermore, we explored the coal petrology factors controlling the pore characteristics of the Xishanyao Formation, aiming to provide geological evidence for the selection of favorable areas and the development potential evaluation of CBM in the study area. The results indicate the following: (1) The total pore volume of the coal samples is 6.318 × 10−3 cm3/g on average, and the micropore volume accounts for a relatively high proportion (averaging 44.17%), followed by the fine pores (averaging 39.41%). The average porosity is approximately 3.87%, indicating good gas storage and connectivity of the coal seams, albeit with some heterogeneity. The coal reservoir is dominated by micropores and fine pores with diameters less than 100 nm, and the pore structure is characterized by low pore volume and high pore area. (2) The pore structure is influenced by both the coalification degree and the coal maceral. Within the range of low coalification, porosity increases with the increase in coalification degree. Building upon this, an increase in the vitrinite content promotes the development of micropores and fine pores, while an increase in the inertinite content promotes the development of meso–macropores. The clay mineral content exhibits a negative correlation with the adsorption pore volume ratio and a positive correlation with the seepage pore volume ratio.

Influence of coal rock on tight sandstone reservoirs in coal seam roofs: A case study of the lower jurassic in the Taibei sag, Turpan-Hami Basin, China

After shale gas, coalbed methane and gas hydrate, coal measure gas has become an important new unconventional resource, for which exploration to depths of >3000 m are taking place in China. However, owing to unusual geological conditions and as yet inadequate exploration technology the current level of exploration is low. The acidic water medium in coal-bearing strata affects the diagenesis of adjacent tight sandstone reservoirs, thereby influencing reservoir quality. However, the current understanding of the impact mechanism of coal seams on neighboring tight reservoirs is insufficient, constraining the further exploration of coal measure gas. In order to reveal the influence of coal rock on a tight sandstone reservoir in its roof, we study the coal-bearing strata of the Xishanyao Formation in the Taibei Sag of the Turpan-Hami Basin using cast thin sections, physical property tests, XRD analysis, carbon and oxygen isotopes, high-pressure mercury intrusion and low-temperature N2 adsorption. The carbonate cement in the sandstone reservoir of the coal seam roof was formed by the decarboxylation of organic acid. The organic acid, containing CO2 generated by coal rock hydrocarbon generation, has modified the tight sandstone reservoir of the coal seam roof via dissolution. This has improved the physical properties and pore throat structure of the tight sandstone reservoir close to the coal-sandstone interface. The amount of improvement extends to about 2 m into the sandstone. During the upward transport of fluid, the pre-existing carbonate cement dissolves and then precipitates, which causes the CO2 generated by the organic acid decarboxylation to exchange carbon with the carbon isotopes in the pre-existing carbonate cement. Due to the slow upward diffusion rate and limited diffusion distance of the CO2-bearing fluids, the carbonate cement exhibits gradually heavier δ13CPDB values with increasing distance from the coal-sandstone interface.

Geochemical Characteristics and Sedimentary Paleoenvironment of the Coal-Bearing Strata in the Xishanyao Formation: A Case Study of the Yihua Coal Mine in the Zhundong Coalfield, Xinjiang

The eastern Junggar Basin in Xinjiang harbors abundant coal resources within the Middle Jurassic Xishanyao Formation. However, the formation environment associated with these coal-bearing strata remains unclear. Geochemical characteristics serve as crucial geological indicators of the sedimentary period. Therefore, it is imperative to explore the geochemical attributes and sedimentary context of the coal-rich layers within the Middle Jurassic Xishanyao Formation in the Zhundong region to enhance the prospects of coal extraction and utilization. The elemental compositions, both major and trace, of the Xishanyao Formation were analyzed through X-ray fluorescence spectrometry (XRF) and inductively coupled plasma mass spectrometry (ICP-MS). A comprehensive analysis was conducted on the sediment provenance, tectonic background, and depositional environment of the coal-bearing strata in the Xishanyao Formation. Moreover, through the utilization of a range of discrimination indices, including Sr/Cu, B/Ga, Sr/Ba, V/Cr, Ni/Co, and δCe, the paleo-depositional setting of the coal-containing layers was reconstructed. The findings suggest that the primary source rocks of the coal-bearing beds in the Xishanyao Formation consist of continental tholeiites, with the predominant material composition in the source region being felsic volcanic rocks originating from the upper crust. The tectonic backdrop of the source region is marked by a continental island arc environment. During the sedimentation period of the Xishanyao Formation, the depositional environment was characterized by a freshwater oxidizing setting. Additionally, it experienced a transition from arid-hot to humid-hot before returning to arid-hot conditions.

Jurassic sedimentary evolution model and its implication for the sandstone-type uranium mineralization in the Kamusite area in eastern Junggar Basin, NW China

The Junggar Basin in the northern Xinjiang Province, northwestern China, is a large hydrocarbon basin with tremendous reserves of oil, gas and coals. Tens of sandstone-type uranium showings, occurrences and/or anomalies have also been discovered in the Junggar Basin since the 1960s, yet hitherto only one large uranium deposit, the Kamusite deposit, has been identified in the Middle Jurassic Toutunhe Formation sandstones in the eastern part of the basin. Sand bodies with high-permeability are the prerequisite for the formation of the in situ leachable sandstone-hosted uranium deposit, nevertheless the spatial distribution and genetic types of the sand bodies, as well as the deposition model in Jurassic time in the Kamusite area both remain unclear, which largely hindered the understanding of the sedimentary evolution and uranium exploration directions in the region.In this contribution, based on the outcrop observation, core logging and well logging data interpretation, and comprehensive analysis, the sedimentary characteristics, sedimentary facies types, sand body morphology, plane distribution characteristics, as well as the sedimentary evolution history in Jurassic time in the Kamusite area have been illustrated in details. From early to late, the Jurassic sediments in Kamusite can be divided into the Badaowan, Sangonghe, Xishanyao, Toutunhe and Qigu formations, of which the sand bodies favorable for the sandstone-type uranium mineralization have been systematically analyzed, and the depositional model in the Kamusite area have been established. The Early Jurassic Badaowan Formation is a set of coal-bearing coarse-grained clastic sediments of the braided river–braided river delta facies, followed by the lake transgression and fine-grained lacustrine deposition in the Sangonghe Formation. The Middle Jurassic Xishanyao Formation is a set of braided river delta facies coal-bearing clastic sediments, while the uranium orebody-bearing Toutunhe Formation underwent the paleoclimate transition from warm and humid to hot and arid, and developed a set of braided river delta to meandering river facies sequences with an overall positive sedimentary rhythm. The Qigu Formation is dominated by a series of meandering river to lacustrine facies fine-grained sediments and largely denuded by later tectonic activities. Three sets of sand bodies favorable for the sandstone-type uranium mineralization are recognized, including those in the lower Toutunhe Formation, the lower Xishanyao Formation, and the upper Badaowan Formation, from bottom to top. A four-stage sedimentary evolution model from the Badaowan Formation to the Toutunhe Formation has been established thereafter, and general exploration suggestions were proposed in the last of the contribution. More drilling is recommended to the south of the Kalasayi Fault, aiming the lower Toutunhe, lower Xishanyao and upper Badaowan formations. To the north of the Kalasayi Fault, more uranium mineralization could also be expected, and the exploration is suggested to focus on the Jurassic Toutunhe, Xishanyao formations and Cretaceous Tugulu Group.

Overburden failure and water–sand mixture outburst conditions of weakly consolidated overlying strata in Dananhu No.7 coal mine

This study presents a case of weakly consolidated strata developed in Dananhu No.7 coal mine. Using a combination of numerical simulation, field measurement comparison, and the critical hydraulic gradient criterion, we investigate the overburden failure and the risk possibility of water–sand mixture inrush during excavation. The following are the principal findings: (1) Weakly consolidated rocks have poor physical characteristics, particularly when they are mudded and disintegrated after encountering water, which may become a favorable source of water–sand inrush; (2) The water-conducting zone develops to a height of 160.5 m with a crack-mining ratio of 15.29 times, extending upward to Toutunhe Formation aquifer. The predictions are consistent with measurements in adjacent mines with similar geological conditions; (3) Cracks without larger subsidence are developed at the front edge of the mining direction, and some parallel stepped cracks behind the goaf could be easily observed. Ground subsidence along the goaf center finally displays a symmetrically wide-gentle U shape; (4) The critical hydraulic gradient of Toutunhe Formation aquifer, aquifer above 3# coal seam, and aquifer of 3#–7# coal seam in Xishanyao Formation is 1.314, 1.351, and 1.380, the actual value is 0.692, 2.089, and 7.418 accordingly. It is inferred water–sand mixture outburst will not occur in Toutunhe Formation aquifer, while the potential risk exists in the aquifers of Xishanyao Formation. Through drainage and depressurization projects, a water–sand mixture outburst accident does not occur during excavation. This study reveals the overburden failure characteristics and the initiation mechanism of water–sand inrush in weakly cemented strata, as well as the internal relationship between them, which provides new research ideas for safe operation in other mining areas with similar geological conditions. The research work has certain practical guiding significance.

Stable carbon isotopes and stomatal frequency of Middle Jurassic ginkgophyte fossils from the Turpan basin, northwestern China: Implications for reconstructing paleo-CO2 changes

The Jurassic climate change has attracted a great deal of attention from geologists. However, the investigations on the correlation between carbon isotopes of plant fossils and high CO2 levels in the Mesozoic are scarce. In this study, 16 well-preserved fossilized Ginkgoites and Phoenicopsis leaves were selected from the Xishanyao Formation in the Turpan basin. Two chemical protocols were applied for the pretreatment of stable carbon isotopes: HCl reagent and HCl + HF reagents. The average δ13C values followed the two protocols were –22.8 ‰ and –22.9 ‰, respectively, indicating that HF reagent has no effect on the carbon isotopes of the ginkgophyte fossils. The difference between the δ13C values of Ginkgoites fossils and Phoenicopsis fossils is obvious, which is mainly caused by distinct carbon isotope fractionation between different plant taxa. However, both values show the same δ13C trend in the early Middle Jurassic, i.e., increasing and then decreasing with time. In addition, both stomatal index (SI) and stomatal ratio (SR) methods are used to reconstruct paleo-CO2 levels with average values of 2564 ppmv and 1245 ppmv, respectively, indicating that SR method is more reliable. There was weak correlation (R = 0.23) between δ13C and CO2 values in the early Middle Jurassic which may be due to low response of δ13C values of ginkgophyte fossils to CO2 changes. Therefore, our work emphasizes the caution on using stable carbon isotopes of ginkgophyte fossils to reconstruct high paleo-CO2 concentrations.

Coalbed Methane Enrichment Regularity and Model in the Xishanyao Formation in the Santanghu Basin, NW China

The Santanghu Basin is a typical low-rank coal-bearing basin in northwest China, with abundant coalbed methane (CBM) resources. However, the understanding of the main controlling factors and reservoir formation models of CBM in low-rank coal is still insufficient, which has restricted the exploration and development of CBM in this region. In this paper, the CBM enrichment controlling factors and enrichment models are analyzed based on the aspects of sedimentary environment, reservoir characteristics, sealing conditions, and hydrogeological conditions after systematically analyzing the geological characteristics of coal measures. The research results indicate that the coal seams of the Xishanyao Formation in the Santanghu Basin are stably developed, with the main macerals being vitrinite and a lower degree of coalification belonging to low-rank coal; the highest content of CBM can reach 7.17 m3/t, and the methane is mainly composed of biogenic gas supplemented by thermogenic gas; the roof lithology of the coal seam is mainly mudstone and siltstone, with good sealing conditions. Finally, two enrichment modes of coalbed methane in slope zones are proposed, namely, the CBM enrichment in the slope zone and the CBM enrichment by fault-hydraulic plugging. The results of this study can serve as a guide for the exploration and development of the deep-buried coalbed methane in the low-rank coal areas.

Reservoir characteristics and controlling factor of tight sandstone in Shuixigou Group in Taibei depression, Turpan-Hami basin

The positive structure belts surrounding the Taibei Sag, Turpan-Hami Basin, have been the main targets for oil and gas exploration for years and are now left with remaining resources scattering in reservoirs adjacent to source rocks in the sag, where the Shuixigou Group with substantial oil and gas potential constitutes the primary focus for near-source exploration. Consequently, characterization of development and key controlling factors of reservoir space becomes a must for future exploration in the area. This study investigates the development traits, genesis, and controlling factors of the Xishanyao and Sangonghe formations in the Shengbei and Qiudong Sub-sags of the Taibei Sag with techniques such as cast thin-section observation, porosity and permeability tests, high-pressure mercury injection, and saturation fluid NMR analysis of reservoir rocks. The findings reveal that the Shuixigou Group in the Taibei Sag consists of lithic sandstone. Reservoirs in the group are mostly poor in terms of physical properties, with undeveloped primary pores dominated by intergranular dissolved pores as a result of a strong compaction. Comparative analysis of key controlling factors of the Sangonghe Formation reveals significant distinctions in sandstone particle size, sand body thickness, genesis and distribution, provenance location, and source rock type between the Qiudong area and Shengbei area. Vertically, the coal seams of the Xishanyao Formation exhibit heightened development with shallower burial depth and lower maturity compared to those of the Sangonghe Formation. Consequently, this environment fosters the formation of organic acids, which have a stronger dissolution effect on minerals to develop secondary dissolution pores, and ultimately resulting in better reservoir physical properties. Overall, the reservoirs within the Qiudong area of the Taibei Sag demonstrate superior characteristics compared to those in the Shengbei area. Furthermore, the reservoir physical properties of the Xishanyao Formation are better than those of the Sangonghe Formation. The research findings will provide valuable guidance for the exploration and development of lithological oil and gas reservoirs within the Taibei Sag.

A new conifer stem, Yiwupitys elegans, from the Yiwu Jurassic Forest, Hami, Xinjiang, Northwest China

Fossil wood not only provides a comprehensive understanding of the ancient floral composition and the evolution history of wood through time, but also sheds light on the paleoclimate, paleoenvironment, and paleoecology. Permineralized conifer wood commonly occurs in the Jurassic of China; however, the detailed anatomical study has been sparsely conducted on the Jurassic wood from Xinjiang Uygur Autonomous Region (Xinjiang), Northwest China. Here, we describe a unique permineralized stem, Yiwupitys elegans Gou et Feng gen. nov. et sp. nov. from the Middle Jurassic Xishanyao Formation in Naomaohu Town of Yiwu County, Hami City, Xinjiang, Northwest China. The fossil stem is preserved with pith, primary xylem, and secondary xylem. The solid pith is heterocellular and characterized mainly by clustered or isolated secretory cells and pitted parenchymatous cells at the pith periphery. The primary xylem is mesarch showing annular, helical, and scalariform thickenings on the tracheid walls from the protoxylem to the metaxylem. The secondary xylem is pycnoxylic and exclusively composed of tracheids and parenchymatous rays. Growth rings are distinct. The secondary xylem tracheids are featured commonly by bent ends overlapping each other. They have mostly uniseriate or biseriate, or partially triseriate alternately or oppositely arranged bordered pits on the radial walls and uniseriate or biseriate bordered pits on the tangential walls. The rays are uniseriate and up to sixteen cells high. There are four to eight cupressoid pits in each cross-field, arranged in the araucarioid type. Leaf traces initiate from the pith margin and possess a single vascular strand in each trace. The anatomical structures indicate that Yiwupitys elegans has a closer affinity with conifers, although it shows few characteristics of ginkgophytes. Our study shed new light on the plant diversity of the Yiwu Jurassic Forest.

Tectonic-geomorphological evolution and provenance-sedimentary response: Insights from the Middle Jurassic–Lower Cretaceous, Junggar Basin, China

Understanding the complex depositional systems within lake basins requires a comprehensive analysis of the interplay between tectonic-geomorphological evolution and climate change. Based on three-dimensional seismic data, outcrops, well logging, cores, thin sections, and heavy mineral data, this study reconstructed the tectonic-geomorphological evolution of the Middle Jurassic–Lower Cretaceous in the Junggar Basin and analysed the responses of sequence stratigraphy, sediment provenance, and depositional systems. The Jurassic Xishanyao and Cretaceous Qingshuihe Formations developed third-order sequences (SQ1 and SQ2, respectively), which both consisted of lake transgressive (TST) and regressive system tracts (RST). During the SQ1 period, the Chepaizi-Mosuowan palaeo-uplift underwent substantial erosion and supplied sediment to the surrounding sub-basins, where deposited braided-river deltas were formed. Middle Yanshanian tectonism resulted in rapid subsidence, and the Chepaizi-Mosuowan palaeo-uplift submerged. During the early TST stage of SQ2, sediment from the northeast and northwest formed shallow braided-river deltas in topographic lows surrounding the residual Chepaizi-Mosuowan palaeo-uplift and reduced topographic roughness, resulting in a gentle slope to the south. The rapid lacustrine transgression from southeast to north in the late TST stage of SQ2 formed local beach-bars at shallow depths. During the RST stage of SQ2, a climate transition occurred from arid to humid, resulting in depositional systems that evolved from braided to meandering river deltas. The sedimentary fillings of the SQ1 and SQ2 stages were mainly controlled by tectonic-geomorphology and climate change, respectively. Collectively, our results suggest that the tectonic-geomorphological evolution and climate change jointly controlled the sediment sources and determined the depositional features in the basin.

A thermophilous and arid-tolerant flora from the Lower Jurassic of the Junggar Basin, Xinjiang, NW China, corresponding to the Toarcian Oceanic Anoxic Event

Abstract Twenty taxa of fossil plants are described from the Sangonghe Formation (Lower Jurassic) of the Haojiagou section in the Junggar Basin, Xinjiang, NW China. The Sangonghe flora consists of Equisetales, ferns, bennettitaleans, ginkgoes, conifers and gnetales, but is dominated by ferns. It is a low-species-diversity but extraordinary flora as it has a high proportion (45%) of thermophilous or arid-tolerant (xerophilous) elements, in comparison to 0% in the underlying Badaowan Formation and c. 2% in the overlying Xishanyao Formation. These thermophilous or arid-tolerant (xerophilous) elements include Marattiopsis asiatica Kawasaki, Phlebopteris polypodioides Brongniart and Dictyophyllum sp. (ferns), Otozamites leckenbyi Harris, Otozamites sp., Zamites sp. and Dictyozamites sp. (bennettitaleans), Brachyphyllum ( Hirmeriella ?) sp. (conifers) and Cadmisega ephedroides Krassilov and Bugdaeva (gnetales). Based on the geological ranges of the known species and comparisons with coeval floras in Eurasia, the age of the Sangonghe flora is Toarcian (Early Jurassic). The flora reveals a climatic warming and aridification event that occurred during the Toarcian in the Junggar Basin. Palaeontological (including palaeobotanical and palynological), sedimentological and geochemical data demonstrate that warming and aridification occurred widely across the north of China during the Toarcian, and that this might be the response of the terrestrial ecosystem to the Toarcian Oceanic Anoxic Event.

The Geochemical Characteristics of Source Rock and Oil in the Fukang Sag, Junggar Basin, NW China

The Fukang Sag in the Junggar Basin is the main exploration block. However, the origin and source of crude oil are still controversial, which seriously affects the well locating and exploration in this area. In the present work, 30 source rocks and 21 crude oils were collected for geochemical analysis to clarify the source of the organic matter, the sedimentary environment, and the evolution degree. Among them, the source rocks of the Pingdiquan Formation are type II1 organic matter with good quality, the source rocks of the Badaowan Formation are type II2-III organic matter with fair–good quality, and the source rocks of the Xishanyao Formation are type II2 organic matter with fair quality. All source rocks are in the mature stage. The results of the biomarker compounds show that the lacustrine mudstone of the Xishanyao Formation and the coal-measure mudstone of the Badaowan Formation were deposited in reducing environments. The former was mainly from lower aquatic organisms, and the latter was from terrestrial higher plants. The mudstone of the Pingdiquan Formation was formed in a weakly oxidizing–weakly reducing depositional environment, and its parent material was of mixed origin. Based on the results of the biomarker compounds and carbon isotopes, the crude oils were divided into three categories. The Family I crude oil has the characteristics of low maturity, low salinity, and more input of low-level aquatic organisms, and the carbon isotope has a good affinity with the lacustrine mudstone of the Xishanyao Formation. The Family II crude oil shows medium maturity, low salinity, mainly higher plant input, and heavy carbon isotope, mainly derived from the Badaowan Formation coal-measure mudstone. The Family III crude oil is characterized by high maturity, high salinity, mixed parent materials, and light carbon isotope and originates from the mudstone of the Pingdiquan Formation. The results provide a reference for oil and gas exploration and development in the eastern area of the Junggar Basin; the future research will focus on well areas with high maturity near the Fukang fault zone.

Controls on anomalously high porosity/permeability of Middle Jurassic deeply buried tight sandstones in the Taibei Sag, Turpan-Hami Basin, northwestern China: Implications for reservoir quality prediction

The lower member of the Middle Jurassic Xishanyao Formation (J2x1+2) sandstones are significant exploratory targets for hydrocarbon resources in the Taibei Sag of the Turpan-Hami Basin, northwestern China. Formation of anomalously high porosity/permeability in deeply buried J2x1+2 sandstones and reservoir quality prediction were investigated using a variety of petrographic analyses. These results show that the J2x1+2 sandstones are mostly feldspathic litharenites and litharenites, which are characterized by moderate-to good sorting, silty to medium granularity, and point- to long grain contacts. The J2x1+2 sandstone has low porosity (avg 6.0%) and permeability (avg 1.12 mD), but shows anomalously high porosity/permeability at depth interval of 3850–4050 m. There is a noticeable variation in pore types and sizes from intergranular-intragranular dissolution pores with a size mode of 2.0 μm in anomalously high porosity (AHP) sandstones, to major intragranular dissolution pores with a size mode of 0.5 μm in normally high porosity (NHP) sandstones, to most micropores with a size mode of 0.25 μm occurred in the normally low porosity (NLP) sandstones. The compaction is the main cause of porosity destruction, resulting in an average porosity loss of 89.6%. However, the authigenic minerals have relatively little influence on reservoir quality. The combination of nappe tectonics and well-sorted particles alleviated the compaction and thus preserved more intergranular pores in the AHP sandstones. Dissolution further increases the porosity and eventually forms the AHP sandstones. The strong carbonate-cemented facies (SCC), tightly compacted facies (TC), moderately compacted with moderate dissolution facies (MCMD), and weakly compacted with strong dissolution facies (WCSD) are determined in the J2x1+2 sandstones. The sandstones with SCC and TC are recognized as the NLP reservoirs. The MCMD and WCSD correspond to the NHP and AHP reservoirs, respectively. The reservoir quality predicted using the constructed diagenetic facies charts is in good agreement with the photomicrograph observations and physical property tests. Additionally, the AHP reservoirs are still developed in the deeply buried sandstones with depths larger than 4000 m.

Research on fluid mobility in tight-sandstone with a NMR fractal theory pore classification method

The fluid mobility characteristics in the pores with various apertures for tight-sandstone would finally determine the fluid mobility and production of tight oil and gas reservoirs. In this study, the tight-sandstone core samples collected from Middle Jurassic Xishanyao Formation in Santanghu Basin were launched the fluid mobility measurements under various centrifugal speeds. With the NMR fractal theory pore classification method, the various types of pores in the tight-sandstone core samples were classified, and the fluid mobility in different types of pores were also investigated. The results show that the tights-sandstone core samples were significantly influenced by compaction, and the core samples are relatively dense, the mineral intergranular solution pores and colloidal intergranular pores are the main storage spaces. With a constant increase of the centrifugal speed, the fluid mobility increases continuously, and the fluid mobility for CTOS-19 features stronger than that of CTOS-7, which is related to the complexity of pore structure in tight-sandstone sample. Compared with the pore aperture in CTOS-19, the pore aperture in CTOS-7 is smaller, and the connectivity between the smaller and larger pores is poorer, leading to the poorer fluid mobility. Besides, the NMR fractal theory pore classification method also shows that the COTS-7 features more pore types than COTS-19, five and four types respectively. The type P2 and P3 pores are dominant in COTS-7 and CTOS-19 core samples, and the connectivity between type P2 and P3 pores contributes dominantly to the fluid mobility. With the NMR fractal theory pore classification method, the complexity of the distribution of fluid and fluid mobility in tight reservoirs could be studied quantitatively, and the results can efficiently guide the development of residual oil and gas in tight oil reservoirs.