Wood Resources Research Articles

Property Comparison of Different Standard Wood Pallets for Possible Local Sourcing

The global expansion of freight transport across business types has impacted supply chain logistics in terms of coordinating the storage and delivery of goods and services across the supply chain. Wooden pallets are in high demand due to their price and environmental impact; however, the wood raw materials needed for making pallets are in short supply. This research was aimed at analyzing the possibility of using local wood instead of imported wood in the production of standard industrial pallets. Industrial pallets were designed using local acacia wood to replace some or all of the imported Radiata pine. This local acacia wood was utilized to prepare and construct pallets of the standard dimensions that were in accordance with the designs. Pallets made from the same type of wood and mixed woods were heat treated to meet the criteria of the ISPM 15 protocol for export. Flat pallet testing was conducted in accordance with industrial standards for the evaluation of the finished products. All types of pallets, including pallets containing local wood components, showed no visible damage during drop tests and compression strength assessments. However, the variability in diagonal span rates was influenced by the wood used in the fabrication process. Pallets frabricated from both partial and full acacia wood exhibited increased bending rates of 2081 and 2650 MPa, respectively, due to the higher levels of cellulose and lignin found in acacia wood. Our research suggests that there is an opportunity to manufacture standard pallets using locally sustainable wood resources, with some modifications to current industrial processes required.

PRODUCTION OF SODIUM CARBOXYMETHYLCELLULOSE FROM PINE WOOD WASTE AND INVESTIGATION OF ITS PHYSICOCHEMICAL PROPERTIES

With the increasing use of wood resources, wood waste disposal is becoming a more pressing issue. Wood waste can be effectively processed and reused, thus reducing environmental impact. Our study proposes using wood waste to produce sodium carboxymethyl cellulose (Na-CMC) with enhanced physical and chemical properties. The paper explores a promising approach to processing Scots pine (Pinus sylvestris L.) wood waste via the suspension method to obtain the biopolymer Na-CMC. The ability to convert pine sawdust into Na-CMC meets the demand for high-quality wood raw materials, expands the biopolymer's applications, and reduces the environmental and economic burden of wood consumption. The aim of this study is to produce Na-CMC from Scots pine sawdust at 60°C and 80°C and investigate the biopolymer’s physical and chemical properties. In laboratory experiments, Na-CMC samples were synthesized at 60°C and 80°C using sodium hydroxide, propanol-2, and sodium monochloroacetate (Na-MCA). The physical and chemical properties of Na-CMC were studied such as functional groups (hydroxyl, methylene, carbonyl), alcohol and ether bonds by IR spectrophotometry; molecular mass, polymerization degree, and viscosity of polymer solutions by viscometry; carboxymethyl groups by conductometric titration; and product yield and solubility by gravimetry. The scientific and practical significance of the chemical modification of wood sawdust cellulose has been established, with carboxymethylation proving effective at 60°C

Wood‐inspired High Ionic Conductivity Hydrogel Electrolytes for Flexible Supercapacitors

Hydrogel is a promising electrolyte substrate, but its ionic conductivity needs further improvement. In this paper, we propose a strategy to improve the ionic conductivity of hydrogels with flexible wood and fabricate a flexible wood‐based poly(acrylic acid‐acrylamide) composite hydrogel electrolyte (WHE) by delignification and in‐situ polymerization. The flexible wood as a porous backbone for hydrogels can regulate ion transport pathways to improve the ionic conductivity of hydrogels. The straight pores of wood confine the transport of electrolyte ions along the shortest path, resulting in a high ionic conductivity of 3.0 × 10‐2 S cm‐1, which is great in composite polymer electrolytes. We have systematically investigated the effect of the degree of delignification and the polymerization process on the overall performance of the electrolyte. The optimized supercapacitor exhibits a specific capacitance of 155.64 F g‐1 and an energy density of 7.45 W h kg‐1. The WHE is applied to flexible supercapacitor, which exhibits good flexibility under bending conditions and can maintain similar electrochemical performance at a wide range of bending angles. This work provides an effective strategy for the efficient use of wood resources and the development of low‐cost, environmentally friendly, and high‐performance hydrogel electrolyte materials.

Assessment of Fuel Wood Consumption and Its Effect on Forest Depletion in Dry Deciduous Forest of Haliyal Taluk, Uttar Kannada District, India

Forest plays a significant role in extending wood and non-wood resources around the world, Forests provide ecosystem services, such as timber, food, fuel, fodder, non-wood products and shelter, which are essential for human well-being. However the increasing demand and pressure on forest resources majorly like fuel wood lead to degradation of forests. Hence it is important to assess the fuel wood consumption pattern and its impact on the forest for sustainable management of resources. In the present study, Haliyal taluk was selected, the area which is under rapid urbanization, surrounded by dry deciduous forest and the people living in that area depend on forest for fuel wood consumption. The study examined fuel wood collection among different farmer categories: large, medium, small, and landless. Results from the semi structured questioner survey revealed that medium farmers collected the most fuel wood. The total fuel wood consumption in Haliyal taluk was 5232.2 tonnes, with an average household consumption of 2.60 quintals of fuel wood per year. Major preferred tree species for fuel wood were Xylia xylocarpa, Terminalia tomentosa and Lagerstroemia lanceolata, which are valued for their high energy content, favourable burning characteristics and availability. For estimation of forest degradation Randomized Block Design was used and the study classified the forest vegetation into four crown density classes: Very Dense Forest (T1), Moderately Dense Forest (T2), Open Forest (T3), and Scrub (T4). Data was collected from 20 plots (20 x 20 m each) across these classes to measure forest depletion. The results showed that statistically significant differences in degradation levels, with the highest depletion (31.56 m³/ha) in very dense forests followed by moderate depletion (6.75 m³/ha) in moderately dense forests and the lowest (2.4 m³/ha) in scrub forests. This pattern reflects greater anthropogenic pressures and higher fuel wood availability in more dense forest types.

Bilateral Defect Cutting Strategy for Sawn Timber Based on Artificial Intelligence Defect Detection Model.

Solid wood is renowned as a superior material for construction and furniture applications. However, characteristics such as dead knots, live knots, piths, and cracks are easily formed during timber's growth and processing stages. These features and defects significantly undermine the mechanical characteristics of sawn timber, rendering it unsuitable for specific applications. This study introduces BDCS-YOLO (Bilateral Defect Cutting Strategy based on You Only Look Once), an artificial intelligence bilateral sawing strategy to advance the automation of timber processing. Grounded on a dual-sided image acquisition platform, BDCS-YOLO achieves a commendable mean average feature detection precision of 0.94 when evaluated on a meticulously curated dataset comprising 450 images. Furthermore, a dual-side processing optimization module is deployed to enhance the accuracy of defect detection bounding boxes and establish refined processing coordinates. This innovative approach yields a notable 12.3% increase in the volume yield of sawn timber compared to present production, signifying a substantial leap toward efficiently utilizing solid wood resources in the lumber processing industry.

Surface layer reinforcement modification for wood with high strength and flame retardancy performances

The high-value utilization of low-value wood can effectively address the shortage of wood resource, while also contributing to the global green sustainable development and the implementation of “dual carbon” strategy. The present study employed an innovative technology to achieve controllable surface reinforcement modification of fast-growing poplar wood, resulting in improved strength and exceptional flame retardancy for structural applications. The achievement was realized through a three-step method, involving delignification, impregnation, and surface densification, while minimizing the loss of wood volume. The results demonstrated that surface functional densification can significantly improve the mechanical properties of fast-growing poplar wood, with the modulus of rupture (MOR) and modulus of elasticity (MOE) reaching 140.6 MPa and 11.8 GPa, respectively, representing a 3.4-fold and 2.5-fold increase compared to the control group (CK). The samples were found to possess thin surface-densified layers, while the core layer remained unaltered, thereby exhibiting a sandwich structure with significant disparity in density between the layers, reaching up to a factor of 2. The pores structure of the surface layers underwent significant densification, with a gradual deformation distributed throughout its thickness direction. A process optimized for surface densification involving a 2-hour delignification duration and a pressure of 3 MPa. The sample subjected to surface functional modification exhibited a 90-second delay in the peak of heat release compared with the CK. The heat release rate (HRR) experienced a significant deceleration, accompanied by notable reductions in total heat release (THR) and smoke production rate (SPR). The mechanisms underlying the enhancement of surface functionality were elucidated from the perspectives of physical mechanics, microstructure, and flame retardancy, providing a theoretical foundation for the efficient utilization of fast-growing wood.

Resolving complexity: Material flow analysis of a national wood flow system integrating the versatility of wood

AbstractA systemic understanding of the use of wood resources is required to defossilize society and promote bio‐based developments. This study provides a novel approach to represent a comprehensive material flow analysis (MFA) spanning the entire wood value chain; encompassing wood harvest to products, use in society, collection, reuse, recycle, energy generation, and trade. By recognizing wood as a complex material, with changing properties throughout its lifespan, we developed a method where we employed a color‐coded system for processes (27 boxes) and 110 flows to symbolize distinct life stages and the dynamic characteristics, including 23 different trade flows. The wood processes and flows are categorized (11 categories) into different wood types (e.g., softwood and hardwood) and harmonized to include all available data on each single step of the wood life cycle, improving data traceability and visualization, and allowing for replicable analysis with respective data noted for each process and flow. Methodological obstacles due to different units, uncertainty of flows, and discrepancies in data are addressed and adjustments proposed. Switzerland was chosen as a case study as a large number of various types of data were available to perform the analysis. The categorized and harmonized flows of woody biomass mapped and analyzed in the MFA provide a comprehensive basis to identify and recommend avenues to increase cascading use of wood as a carbon sink, by considering relevant aspects like the network of flows and processes, the quality and availability of the woody biomass, and the organization of the industry.

A case study of the regional bioeconomy in Central Germany: construction with renewable resources

In response to global challenges like climate change and resource depletion, national and international policies are increasingly emphasising sustainability. The bioeconomy represents a promising field to reconcile environmental integrity with economic development. The objective of this study is to examine the role of renewable resources in the construction industry within the framework of the bioeconomy, with a particular focus on Sustainable Development Goal 11: ‘Sustainable cities and communities’. The case study analyses the practical challenges and opportunities for innovation in Central Germany through a comprehensive regional analysis of construction practices using renewable resources. The methodology involved monitoring biomass flows by assessing harvest yields, area shares and biomass potentials. It also analysed the importance of the bio-based economy by examining employment data and identifying potential growth sectors. Stakeholder engagement was facilitated through knowledge transfer workshops to encourage collaboration and innovation. The results of the study highlight key trends within the industry, including the increasing prevalence of timber buildings, wood as a renewable carbon source in the chemical industry and the growing demand for wood-based packaging solutions. Policy initiatives are playing a supportive role in driving these developments, taking advantage of the region’s extensive wood resources (14.7 million m3 harvested in 2021) and the significant employment contribution of the forestry, wood and construction industries (2% of total employment, representing no less than 81,506 employees). These figures demonstrate the potential for sustainable construction practices to drive local economic growth and contribute to wider environmental objectives.

Improving Mechanical Performance of Self-Binding Fiberboards from Untreated Perennial Low-Input Crops by Variation of Particle Size.

Studies on self-binding hot-pressed fiberboards using agricultural byproducts aim to identify alternatives to scarce wood resources. Particle size and mixture significantly impact strength, although direct comparisons are difficult due to differences in study methods. We evaluated fiberboards made from the two perennial biomass crops Miscanthus and Paulownia and compared them to Picea (spruce), using five distinct particle size blends prepared from milled and sieved particles, respectively. The boards were evaluated for their modulus of elasticity, modulus of rupture, reaction to fire, water absorption, and thickness swelling. All specimens exhibited normal ignitability, as defined by Euroclass E according to EN13501-1. The results indicate that mechanical performance improves with increasing density, which correlates with higher proportions of finer particles. Notably, the finer Miscanthus blends and all Paulownia samples met the modulus of elasticity requirements of EN 622.

A Combination of Transcriptome and Enzyme Activity Analysis Unveils Key Genes and Patterns of Corncob Lignocellulose Degradation by Auricularia heimuer under Cultivation Conditions.

The cultivation of Auricularia heimuer, a species of edible mushroom, heavily relies on the availability of wood resources serving as substrate for the growth of the species. To ensure the sustainable development of the A. heimuer industry and optimize the utilization of corncob as a substrate, this study sought to investigate the potential use of corncob as a substrate for the cultivation of A. heimuer. The purpose of this study was to explore the utilization of corncob lignocellulose by A. heimuer at the mycelium, primordium, and fruiting stages, by specifically examining the expression profiles of both carbohydrate-active enzymes (CAZymes) and the transcriptome of differentially expressed genes (DEGs) relevant to corncob biomass degradation. The results revealed 10,979, 10,630, and 11,061 DEGs at the mycelium, primordium, and fruiting stages, respectively, while 639 DGEs were identified as carbohydrate-active enzymes. Of particular interest were 46 differentially expressed CAZymes genes that were associated directly with lignocellulose degradation. Furthermore, the study found that A. heimuer exhibited adaptive changes that enabled it to effectively utilize the cellulose present in the corncob. These changes were observed primarily at the primordium and fruiting stages. Key genes involved in lignocellulose degradation were also identified, including g6952, g8349, g12487, and g2976 at the mycelium stage, g5775, g2857, g3018, and g11016 at the primordium stage, and g10290, g2857, g12385, g7656, and g8953 at the fruiting stage. This study found that lytic polysaccharide monooxygenase (LPMO) played a crucial role in the degradation of corncob cellulose, further highlighting the complexity of the molecular mechanisms involved in the degradation of lignocellulose biomass by A. heimuer. The study sheds light on the molecular mechanisms underlying the ability of A. heimuer to degrade corncob biomass, with implications for the efficient utilization of lignocellulose resources. The findings from this study may facilitate the development of innovative biotechnologies for the transformation of corncob biomass into useful products.

Trade Creation or Diversion?—Evidence from China’s Forest Wood Product Trade

In recent years, trade protectionism and unilateralism have prevailed, and countries around the world have imposed restrictions on log exports. It has also become more difficult for China to import wood resources and export deep-processed wood forest products. Based on panel data from 2000 to 2019, this study uses social network analysis to measure the level of the Chinese wood forest product trade network, takes the Chinese free trade agreements (FTAs) as the natural experiment, and uses the multi-stage double-difference method to investigate the impact of the signed FTAs on China’s wood forest product trade. The study finds that the trade network of Chinese wood forest products is becoming increasingly complex, and the central position of China and the Association of Southeast Asian Nations (ASEAN) in the network is increasing year by year. The signing of FTAs has had a significant positive impact on the trade of wood forest products in China and a significant trade creation effect. This finding remains true after conducting the placebo test and propensity score-matched regression control. At the same time, the import of wood forest products in China will have a significant trade transfer effect due to the signing of FTAs, and this will not affect exports. Although FTAs show significant trade creation and trade transfer effects in China’s wood forest product trade, they also increase, to a certain extent, the mismatch of forest resources worldwide.

Axial compression behaviour of bamboo-wood composite columns fabricated with glubam and laminated veneer lumber

Both wood and bamboo are natural green biomaterials with a long application history in human society. A novel bamboo-wood composite fabricated with glued laminated bamboo (glubam) and laminated veneer lumber (LVL) was developed to reduce wood resource demand and to promote bamboo utilization efficiency. Experimental and analytical investigations were conducted to study the mechanical performance of 36 bamboo-wood composite columns with different slenderness ratios under axial compression. The three-layer composite column was composed of glubam as outer layers and LVL as a core layer, with horizontal or vertical configurations respectively. The failure modes, ultimate capacity, load and deformation behaviour were evaluated. Strength failure was the typical failure mode of the short columns while buckling was commonly observed for the longer columns. Columns with vertical LVL core had overall better performed with higher compressive strength than the ones with horizontal LVL core configuration. The ultimate load of the composite columns with thin-strip glubam as outer layers were increased by 31.6 % to 45.3 % than those of thick-strip glubam as outer layers. The compressive capacity of the specimens predicted according to three standards were compared with the experimental results. An improved expression considers the material strength and column slenderness ratio was proposed, which provides a better prediction than the current design standards.

Fabrication of PVA-Silica Sol Wood Composites via Delignification and Freezing Pretreatment.

The efficient exploitation of planted fast-growing wood is crucial for enhancing wood resource utilization. In this study, the fast-growing poplar wood was modified by in situ impregnation through vacuum impregnation with polyvinyl alcohol and nano-silica sol as impregnation modifiers, combined with delignification-freezing pretreatment. The samples were characterized by FTIR, XRD, SEM, and the universal mechanical testing machine. The results showed that the wrinkle deformation and cracking of the wood blocks were greatly alleviated after the delignification-freezing pretreatment and the polyvinyl alcohol and nano-silica sol were successfully integrated into the wood. The resulting polyvinyl alcohol-silica sol poplar composites exhibited about 216%, 80% and 43% higher compressive strength with respect to delignified wood, natural wood and impregnated natural wood, respectively, thereby demonstrating superior mechanical properties and potential opportunities for value-added and efficient utilization of low-quality wood.

Spatial variability in the contribution of termites to the decay of plant detritus

AbstractDrylands are characterized by high spatial variability in resource availability due to sporadic rainfall, topography of the landscape and important effects of animals. Resource availability gradients may trigger patterns in decomposer population abundances and activity, which could affect ecosystem functions such as decomposition. Here, we examined the influence of resource availability gradients on the importance of termites in the decomposition of wood and grass litter. We placed wood blocks and grass litter baits in bags accessible and inaccessible to termites across wood and grass resource gradients as determined by the presence or absence of a top mammalian predator and across topographic gradients during a 9‐month period in arid Australia. We hypothesized that grass‐eating termite activity would track grass abundance and wood‐eating termite activity would track wood abundance. Termites were the predominant decomposition agent at these sites. Termites contributed to 99.5% of wood decomposition and 83.9% of grass decomposition during our study period. For wood, the termite effect was spatially variable and increased with habitat wood availability, which was greatest on dunes and where top predators were absent. However, the contribution of termites to grass litter decomposition did not track grass availability or termite abundance. The highest effects of termites on grass decomposition rates were found in habitats where the absence of top predators led to low grass availability. Our findings highlight how spatial variability in resources in addition to other factors that we do not document but are known to be influenced by the presence of top predators, such as insectivore predation rates, across the landscape could affect ecosystem functions such as decomposition.

Maritime Activities of the Demak Sultanate: Shipping and Trade Route in the Nusantara Network (1478-1546)

This study endeavours to explain the geostrategic conditions of the north coast of Java, as well as the activities and maritime policies of the Demak Sultanate. It adopts a historiographic approach comprising heuristics based on the book Suma Oriental as a primary source and other relevant secondary sources; in-depth verification and interpretation of data from various sources; and methodical historical writing. The results illustrate (1) the geostrategic conditions of the north coast of Java, which is in the middle of the Nusantara spice route, helped make Demak and other port cities an important emporium. The region is traversed by monsoon winds that support shipping activities and has abundant teak wood resources for the shipbuilding industry. (2) Demak’s maritime activities included military expeditions to conquer the Portuguese in Malacca and several important emporiums on the north coast of Java; trade expeditions to export-import various commodities; and establishing trade partnerships with other regions, especially Malacca and Maluku. (3) Raden Patah’s maritime policy included the deployment of military expeditions to conquer the Portuguese in Malacca in 1512, establishing trade partnerships with Malacca, producing Jung ships, and building port cities on the north coast of Java as important emporiums; Pati Unus mobilized a military expedition to conquer the Portuguese in Malacca in 1521 and formed the Demak-Cirebon-Palembang military alliance; and Trenggana conquered Lampung and Banten to control the pepper trade until the conquest of the Sunda Kelapa emporium under the Pajajaran kingdom.

Deciphering the plot preferences of forest contractors when purchasing stumpage through conjoint analysis

In order to have sustainable wood value chains, it is essential to understand the factors that determine the incorporation of wood resources into them. Forest contractors are among the key players in this process. This study evaluates the preferences of forest contractors when purchasing forest parcels. The variables considered are: slope of the terrain, distance to the nearest road, parcel size, parcel shape, and the fragmentation of the surrounding land. The study area is Galicia, a region in northwestern Spain that is dominated by small-scale family forestry. An Attribute Levels Survey was designed to establish threshold values of the considered variables to afterwards perform a Choice Based Conjoint Analysis (CBCA). The CBCA allowed to analyze the preferences of forest contractors in relation to the values of these variables and their relative importance. Also, it allowed to generate a map of the level of preference for all the Galician forest parcels with individual, private ownership. The most noteworthy result of this survey was that size greatly impacts the preference of timber contractors, preceded by slope and followed by distance to roads. These results will aid in the design of landscape-scale policies in a geospatial dimension, like the promotion of forest associations, and will lead to an improvement in the sustainability of wood supply.

Physical and mechanical properties of different beech wood species grown at various climate conditions: a review

Abstract Beech wood, renowned for its diverse applications spanning construction, flooring, furniture, veneer, and plywood, holds a paramount position among industrial wood species. Nevertheless, the myriad of beech species worldwide, coupled with the dynamic impact of climate change, have produced structural variations within beech trees. Extensive research has scrutinized the physical and mechanical attributes of beech wood species across the globe. Findings reveal distinguishable mechanical strength, yet increased density leads to notable rates of shrinkage and swelling, somewhat constraining its utility in select domains. Identifying research gaps can create new efforts aimed at exploiting the potential of these wood resources. This paper outperforms a mere exploration of beech wood properties over the past two decades; it delves into the ramifications of climatic fluctuations, temperature shifts, wind dynamics, and soil composition. Given the lack of a comprehensive compendium documenting the full range of physical, mechanical, and microscopic attributes of the Fagus genus, this paper aims to compile information that integrates this multifaceted information.

Sida hermaphrodita Rusby as a papermaking raw material – Chemical and morphological characteristics

A continually increasing demand for papermaking materials and simultaneously growing disproportion between the request for fiber and the limited resources of wood have forced scientists and the papermaking industry to search for the new sources of fibrous raw materials. A new promising set of raw materials for papermaking comes from energy crops. This paper presents Sida hermaphrodita Rusby L., as a non-woody raw material for papermaking. From the studies of chemical composition, it follows that cellulose content of more than 40% characterizes phloem of stems and branches, whereas in xylem exhibits more than 32%. The lowest is the concentration of cellulose in leaves and flowers of Sida. The content of lignin is lower than 24% and 16% in stem xylem and phloem, respectively. In Sida, hemicelluloses and mineral substances stand for being not more than 30% and 2%, respectively. The morphology of Sida cells is similar to hardwood, with fiber length of 0.383, 0.470 and 1.025 mm for parenchyma, xylem, and phloem, respectively. The chemical composition of Sida hermaphrodita together with its morphological characteristics make this raw material suitable for a production of papers intended for printing, writing and tissue.

Comparative Review of Mechanical Properties of Rice Straw and RiceHusk Fiber Reinforced Polymer Composite

Rice straw and rice husk fibers (RS/RH) reinforced polymer-based composites have theability to conserve wood and petroleum resources. As natural filler, rice straw and rice husk offer asustainable material for the production of polymer-based composites. The application ofbiocomposite limits the burning of straw at the root and may further enhance the socioeconomicstatus of farmers and rural populations. This review mainly focuses on five different weightpercentage of reinforced RS and RH fiber content (5%, 10%, 15%, 20% and 25%) in polymercomposites. Nowadays, Epoxy, polyurethane, polyester, PVA, PLA and polyethylene are beingused as matrix material in polymer composites. This paper holds good with understanding themechanical properties, pretreatment methods and offer important insight into potential uses ofpolymer composites with biodegradable reinforce fiber.

Hydrothermal enzyme pretreatment on structure and properties of apple branches

Abstract Pretreatment serves as an important step in maximizing the efficient utilization of woody biomass feedstock. This study focused on enhancing the component and structural properties of apple wood to optimize the utilization of apple wood resources effectively. This study presents the optimization of, the apple wood pretreatment system, combining bioenzyme and hydrothermal treatments. This study aimed to investigate the effect of different bioenzyme pretreatment conditions on the components and structural properties of apple wood extract and to analyze the feasibility of enzyme solution reuse. Fourier transform infrared spectroscopy analysis revealed an increase in cellulose content in the wood flour following enzyme treatment. Concurrently, changes in characteristic peaks indicated an increased hemicellulose content and a reduction in lignin content after the pretreatment, correlating with fraction analysis results. Scanning electron microscopy illustrated that the dense structure of the fiber surface was disrupted after treatment. Notably, the results indicated that the recovered biocomposite enzymes exhibited excellent activity, suggesting their potential for reuse.