Wood Decay Rates Research Articles

Fine root presence and increased phosphorus availability stimulate wood decay in a central Amazonian rainforest

In the Amazon basin, approximately 60% of rainforest thrives on geologically old and highly weathered soils, thus decomposition represents an important mechanism for recycling nutrients from organic matter. Although dead logs and branches constitute up to 14% of the carbon stored in terrestrial ecosystems, woody debris decomposition and mainly the effect of direct nutrient cycling by plant root interaction is poorly studied and often overlooked in ecosystem carbon and nutrient budgets. Here we monitored the decomposition of five different local woody species covering a range of wood density by conducting a long‐term wood decomposition experiment over two years with factorial root presence and phosphorous (P) addition treatments in a central Amazonian rainforest. We hypothesized that woody debris decomposition is accelerated by colonizing fine roots mining for nutrients, possibly strongly affecting wood debris with lower density and higher nutrient concentration (P). We found that root colonization and P addition separately increased wood decay rates, and although fine root colonization increased when P was added, this did not result in a change in wood decay. Nutrient loss from wood was accelerated by P addition, whereas a root presence effect on nutrient mobilization was only detectable at the end of the experiment. Our results highlight the role of fine roots in priming wood decay, although direct nutrient acquisition by plants seems to only occur in more advanced stages of decomposition. On the other hand, the positive effect of P addition may indicate that microbial nutrient mobilization in woody material is driven mainly by wood stoichiometry rather than priming by root activity.

Modelling in-ground wood decay using time-series retrievals from the 5th European climate reanalysis (ERA5-Land)

ABSTRACT This article presents models to predict the time until mechanical failure of in-ground wooden test specimens resulting from fungal decay. Historical records of decay ratings were modelled by remotely sensed data from ERA5-Land. In total, 2,570 test specimens of 16 different wood species were exposed at 21 different test sites, representing three continents and climatic conditions from sub-polar to tropical, spanning a period from 1980 until 2022. To obtain specimen decay ratings over their exposure time, inspections were conducted in mostly annual and sometimes bi-annual intervals. For each specimen’s exposure period, a laboratory developed dose–response model was populated using remotely sensed soil moisture and temperature data retrieved from ERA5-Land. Wood specimens were grouped according to natural durability rankings to reduce the variability of in-ground wood decay rate between wood species. Non-linear, sigmoid-shaped models were then constructed to describe wood decay progression as a function of daily accumulated exposure to soil moisture and temperature conditions (dose). Dose, a mechanistic weighting of daily exposure conditions over time, generally performed better than exposure time alone as a predictor of in-ground wood decay progression. The open-access availability of remotely sensed soil-state data in combination with wood specimen data proved promising for in-ground wood decay predictions.

Prescribed Burning Alters Insects and Wood Decay in a Sagebrush-Steppe Rangeland in Southwestern Idaho, United States

Prescribed fall burning is commonly used worldwide on rangeland sites to enhance vegetation resources and restore disturbed ecosystems, but little is known about how it may alter microbial communities and insect activities. We used two site treatments (low- to moderate-burn severity plots and unburned control plots) at a high-elevation (2 100 m above sea level) shrub-steppe rangeland site. Four yr after the prescribed burn, captured insects primarily consisted of Coleoptera (beetles), Hymenoptera (ants, bees, and wasps), and Orthoptera (grasshoppers and crickets) species with similar or greater numbers captured on burned plots as compared with unburned plots. We used wood stakes to assess microbial population changes. Aspen (Populus tremuloides Michx.) and pine (Pinus taeda L.) wood stakes were placed horizontally on the soil surface and vertically into the mineral to determine microbially altered wood decay rates. In mineral soil, mass loss (wood decay) of both aspen and pine increased significantly in the burned plots after 5 yr. Surface aspen also had increased decay in the burned plots, but pine surface stakes were unaffected. Surprisingly, at this high-elevation site we also found subterranean termites (Reticulitermes tibialis Banks) feeding on both stake species, with greater numbers on aspen stakes in burned plots leading to greater wood mass loss and organic matter turnover rates. Our results suggest that that fall prescribed burning can enhance insect numbers and microbial decay in sagebrush-steppe ecosystems. Understanding these changes can help land managers predict the influence of fall prescribed burning operations on soil biological properties and insect communities.

Termite sensitivity to temperature affects global wood decay rates.

Deadwood is a large global carbon store with its store size partially determined by biotic decay. Microbial wood decay rates are known to respond to changing temperature and precipitation. Termites are also important decomposers in the tropics but are less well studied. An understanding of their climate sensitivities is needed to estimate climate change effects on wood carbon pools. Using data from 133 sites spanning six continents, we found that termite wood discovery and consumption were highly sensitive to temperature (with decay increasing >6.8 times per 10°C increase in temperature)-even more so than microbes. Termite decay effects were greatest in tropical seasonal forests, tropical savannas, and subtropical deserts. With tropicalization (i.e., warming shifts to tropical climates), termite wood decay will likely increase as termites access more of Earth's surface.

Surface Area of Wood Influences the Effects of Fungal Interspecific Interaction on Wood Decomposition-A Case Study Based on Pinus densiflora and Selected White Rot Fungi.

Wood decomposer basidiomycetes are the major agents of lignocellulose decomposition in dead wood. As their interspecific interaction affects wood decomposition, difference in interaction area may alter the magnitude of the effects. This study examines the effects of wood surface area on decomposition by interacting basidiomycetes using laboratory incubation experiments with pine sapwood as a model. Two types of pine wood blocks with equal volume but identical surface area were prepared for colonization by one of four white rot basidiomycete species. The colonized wood blocks were then placed on agar media already colonized by the same strain or one of the other species, simulating fungal monoculture and interspecific interactions on wood surface. Results demonstrated that the decay rate of wood was greater in wood with larger surface, and wood decay was accelerated by the interaction of two fungal species in wood with larger surface but not in wood with smaller surface. In contrast, lignin decomposition was influenced by the competitor in wood with smaller surface but not in wood with larger surface. These results suggest that the observed promotion of decay by fungal interspecific interaction might not be attributable to the resource partitioning between fungal species but to the accelerated carbon of competition cost compensation in this case.

Interspecific wood trait variation predicts decreased carbon residence time in changing forests

Abstract Increasing disturbance will result in a significant flux in above‐ground carbon (C) from live trees to deadwood, concurrent with shifts in forest composition. While interspecific decay variation is widely reported, the implications of compositional change on ecosystem‐level deadwood decay and consequently the future of a globally significant C pool have not been previously explored. Leveraging a 25‐year treefall record for two eastern hardwood forests in central Illinois, USA, we used a chronosequence approach to estimate downed deadwood decay rates for eight common tree taxa. We hypothesized that the increasing dominance of Acer spp. in eastern forests, due to disturbance regime changes, is driving an increase in the mean species‐weighted deadwood decay rate, decreasing the total C storage capacity of regional forests. We observed significantly greater interspecific variation in deadwood decay rates than short‐term studies, with a nearly 12‐fold difference in half‐lives between Aesculus glabra (T1/2 = 6.2 years) and Quercus spp. (T1/2 = 71.1) logs. The canopy‐dominant Acer saccharum (T1/2 = 19.1) decayed significantly faster than other historically dominant eastern taxa, Quercus spp. and Fraxinus spp. (T1/2 = 41.4). Wood traits, notably taxon initial wood C:N ratio, pH and Mn concentration, outweighed local environmental factors in explaining variation in decay rates. Taken together, our findings suggest that at multi‐decadal time‐scales, species traits are the dominant controls of wood decay rates. Our findings corroborate previous studies showing species with slow‐decaying wood tend to have higher C:N ratios. Our species‐specific decay estimates highlight the importance of longer term studies for accurately assessing the decay of high C:N ratio species, as shorter term decay studies are prone to underestimating their decay rates. Our results suggest that ongoing forest compositional changes, where fast‐growing species with less‐dense wood are becoming increasingly abundant, have substantially diminished the deadwood C pool over the last century (species abundance‐weighted mean T1/2 in 1922 = 16.9; T1/2 2020 = 10.5). A free Plain Language Summary can be found within the Supporting Information of this article.

Lodgepole Pine Bole Wood Density and Decay Rate 1, 11, and 22 Years After Felling in Central Montana, United States

Estimates of dead and down woody material (DWM) biomass are important for nutrient cycling, wildlife habitat assessment, fire effects and climate change science. Most methods used to sample woody material initially assess volume then estimates of wood density are used to convert volume to biomass. To assess initial wood density and decomposition rate, this study examined in situ wood density of lodgepole pine logs at the Tenderfoot Creek Experimental Forest (TCEF), central Montana, United States, 1, 11, and 22 years after felling. Mean wood density decreased from 0.39 to 0.27 g cm–3 over 22 years and the single exponential decay rate was k = 0.012 yr–1 1 and 11-years post-felling and 0.022 yr–1 11 and 22 years post-felling. A common 5-category decay classification system was evaluated for estimating wood density by decay class, which identified significant difference in three of four observed classes.

Carbon flux and forest dynamics: Increased deadwood decomposition in tropical rainforest tree-fall canopy gaps.

Tree mortality rates are increasing within tropical rainforests as a result of global environmental change. When trees die, gaps are created in forest canopies and carbon is transferred from the living to deadwood pools. However, little is known about the effect of tree-fall canopy gaps on the activity of decomposer communities and the rate of deadwood decay in forests. This means that the accuracy of regional and global carbon budgets is uncertain, especially given ongoing changes to the structure of rainforest ecosystems. Therefore, to determine the effect of canopy openings on wood decay rates and regional carbon flux, we carried out the first assessment of deadwood mass loss within canopy gaps in old-growth rainforest. We used replicated canopy gaps paired with closed canopy sites in combination with macroinvertebrate accessible and inaccessible woodblocks to experimentally partition the relative contribution of microbes vs. termites to decomposition within contrasting understorey conditions. We show that over a 12month period, wood mass loss increased by 63% in canopy gaps compared with closed canopy sites and that this increase was driven by termites. Using LiDAR data to quantify the proportion of canopy openings in the study region, we modelled the effect of observed changes in decomposition within gaps on regional carbon flux. Overall, we estimate that this accelerated decomposition increases regional wood decay rate by up to 18.2%, corresponding to a flux increase of 0.27MgCha-1 year-1 that is not currently accounted for in regional carbon budgets. These results provide the first insights into how small-scale disturbances in rainforests can generate hotspots for decomposer activity and carbon fluxes. In doing so, we show that including canopy gap dynamics and their impacts on wood decomposition in forest ecosystems can help improve the predictive accuracy of the carbon cycle in land surface models.

Studies into Fungal Decay of Wood In Ground Contact—Part 1: The Influence of Water-Holding Capacity, Moisture Content, and Temperature of Soil Substrates on Fungal Decay of Selected Timbers

This article presents the results from two separate studies investigating the decay of wood in ground contact using adapted versions of laboratory-based terrestrial microcosm (TMC) tests according to CEN/TS 15083-2:2005. The first study (A) sought to isolate the effect of soil water-holding capacity (WHCsoil [%]) and soil moisture content (MCsoil [%WHCsoil]) on the decay of five commercially important wood species; European beech (Fagus sylvatica), English oak heartwood (Quercus robur), Norway spruce (Picea abies), Douglas-fir heartwood (Pseudotsuga menziesii), and Scots pine sapwood (Pinus sylvestris), while keeping soil temperature (Tsoil) constant. Combinations of soil mixtures with WHCsoil of 30%, 60%, and 90%, and MCsoil of 30%, 70%, and 95%WHCsoil were utilized. A general trend showed higher wood decay, measured in oven-dry mass loss (MLwood [%]), for specimens of all species incubated in soils with WHCsoil of 60% and 90% compared to 30%. Furthermore, drier soils (MCsoil of 30 and 70%WHCsoil) showed higher MLwood compared to wetter soils (95%WHCsoil). The second study (B) built on the first’s findings, and sought to isolate the effect of Tsoil and MCsoil on the decay of European beech wood, while keeping WHCsoil constant. The study used constant incubation temperature intervals (Tsoil), 5–40 °C, and alternating intervals of 10/20, 10/30, and 20/30 °C. A general trend showed drier MCsoil (60%WHCsoil), and Tsoil of 20–40 °C, delivered high wood decay (MLwood > 20%). Higher MCsoil (90%WHCsoil) and Tsoil of 5–10 °C, delivered low wood decay (MLwood < 5%). Alternating Tsoil generally delivered less MLwood compared to their mean constant Tsoil counterparts (15, 20, 25 °C). The results suggest that differences in wood species and inoculum potential (WHCsoil) between sites, as well as changes in MCsoil and Tsoil attributed to daily and seasonal weather patterns can influence in-ground wood decay rate.

Assessment of the effectiveness of wood pole repair using FRP considering the impact of climate change on decay and hurricane risk

Electric power distribution systems are vulnerable to disruption due to severe weather events, especially hurricanes. Such vulnerability is expected to increase over time due to the impact of climate change on hurricanes and the decay of wood poles that support the distribution lines. This study investigates the effectiveness of using fiber-reinforced polymer (FRP) sleeve to reinforce wood poles subjected to decay and hurricane hazard to restore their lost strength and extend their effective service life. The potential impact of climate change on the pole decay rate and the intensity and frequency of hurricanes is also considered. The optimal FRP repair time based on the structural reliability of the poles is also determined. Three locations with varying climates are chosen to evaluate and compare the results: Miami, Charleston, and New York City. The results show that in all three locations, the application of the FRP sleeve can more than double the service life of the pole depending on the time of the repair. The results also show that climate change significantly increases the vulnerability of the pole. The probability of failure of the pole at the end of the 21st century under RCP8.5 emission scenario in Miami, Charleston, and New York City increase by about 30%, 70%, and 73%, respectively, compared to a no climate change scenario. If climate change is only assumed to affect the decay of the pole, i.e., no change in hurricane hazard intensity, the corresponding increases in failure probability are 5%, 22%, and 20% in Miami, Charleston, and New York City, respectively. This implies that most of the impact of climate change on pole failure risk is due to the increase in hurricane intensity. The impact of climate change on decay is found to be comparatively small. It increases with time as variation in temperature and precipitation becomes more prominent towards the end of the 21st century. The optimization results show that the optimal FRP repair time depends on how the FRP affects the pole's decay rate. If the FRP can significantly slow down the wood decay rate, the optimal time of repair is at the beginning of the pole's life cycle. If the FRP has no impact on the wood decay rate, it is better to repair the pole after significant decay has occurred.

Dynamics of dead wood decay in Swiss forests

BackgroundForests are an important component of the global carbon (C) cycle and can be net sources or sinks of CO2, thus mitigating or exacerbating the effects of anthropogenic greenhouse gas emissions. While forest productivity is often inferred from national-scale yield tables or from satellite products, forest C emissions resulting from dead organic matter decay are usually simulated, therefore it is important to ensure the accuracy and reliability of a model used to simulate organic matter decay at an appropriate scale. National Forest Inventories (NFIs) provide a record of carbon pools in ecosystem components, and these measurements are essential for evaluating rates and controls of C dynamics in forest ecosystems. In this study we combine the observations from the Swiss NFIs and machine learning techniques to quantify the decay rates of the standing snags and downed logs and identify the main controls of dead wood decay.ResultsWe found that wood decay rate was affected by tree species, temperature, and precipitation. Dead wood originating from Fagus sylvatica decayed the fastest, with the residence times ranging from 27 to 54 years at the warmest and coldest Swiss sites, respectively. Hardwoods at wetter sites tended to decompose faster compared to hardwoods at drier sites, with residence times 45–92 and 62–95 years for the wetter and drier sites, respectively. Dead wood originating from softwood species had the longest residence times ranging from 58 to 191 years at wetter sites and from 78 to 286 years at drier sites.ConclusionsThis study illustrates how long-term dead wood observations collected and remeasured during several NFI campaigns can be used to estimate dead wood decay parameters, as well as gain understanding about controls of dead wood dynamics. The wood decay parameters quantified in this study can be used in carbon budget models to simulate the decay dynamics of dead wood, however more measurements (e.g. of soil C dynamics at the same plots) are needed to estimate what fraction of dead wood is converted to CO2, and what fraction is incorporated into soil.

Optimization of Condition-Based Maintenance of Wood Utility Pole Network Subjected to Hurricane Hazard and Climate Change

Electric power distribution systems that link the bulk power grid (generation and transmission systems) to customers are the leading cause of power outages due to their vulnerability to extreme wind events, especially hurricanes. The strength of the wood poles that typically support the distribution lines also deteriorate over time. The vulnerability of the poles is expected to increase due to the potential impact of climate change on both hurricane hazard and wood decay rate. As such, an effective maintenance planning method is required for the vast number of poles supporting distribution lines. This paper presents a framework to optimize the maintenance of a network of wood utility poles. Corrective replacement due to failure caused by hurricanes and preventive replacement due to excessive decay are considered. The objective is to find the optimal inspection interval for the preventive replacement to minimize the long-term maintenance cost. To solve the optimization problem, the decay of the poles is modeled as a stationary gamma process. The impact of climate change on the rate of pole failure and replacement is also investigated. Two locations are considered as case studies: Miami, Florida, and New York City, New York. The period from 2010 to 2099 is considered for the study. The results of the case study show that the optimal inspection/replacement cycle determined using the developed framework results in lower total maintenance costs compared to current typical utility practice. Based on the inspection and replacement costs used in the study, the results show that adopting a periodic preventive maintenance policy decreases the failure rate of the poles but increases the total maintenance cost. However, only the cost of replacing the poles is considered here. Other considerations, such as indirect costs due to power outages and the impact of pole failure on system reliability, can render the adoption of a preventive replacement policy cost-effective. The results also show that climate change can increase the total maintenance cost. Based on current typical utility maintenance practice, climate change can increase the total maintenance cost by up to 8% in Miami and 6% in NYC, depending on the emission scenario considered.

Comparison of decay rates between native and non-native wood species in invaded forests of the southeastern U.S.: a rapid assessment

Invasive plants have the potential to affect decomposition both directly, by introducing novel substrates that may differ from native species in key structural or chemical properties, and indirectly through changes to soil properties and microbial communities. The relative importance of these two mechanisms is unclear, especially with regard to wood decomposition. To explore these questions, we used a novel method to rapidly assess the wood decay rates of 11 native and 11 invasive non-native angiosperm species. The study was repeated at three pairs of sites, each consisting of an invaded and a relatively uninvaded forest. The invaded sites had either been colonized by a non-native grass (Microstegium vimineum (Trin.) A. Camus), a non-native woody shrub (Ligustrum sinense Lour.) or by multiple invasive species. After one year in the field, mass loss varied more than two-fold among the 22 wood species (24.2–52.3%). Wood origin (i.e., native or non-native) was only important at the Microstegium sites, with non-native species decomposing marginally faster than native species. Wood decomposed faster at both the Ligustrum-invaded and multiply-invaded sites than in their respective uninvaded sites but there were no differences between sites invaded or not by Microstegium. We detected positive relationships overall between mass loss and pH, K, P and NO3−, but invasion had no consistent effects on these soil properties. The results from this study show that the differences in wood decay rates between native and non-native species and the effects of invasion are highly idiosyncratic, with effects depending greatly on species and ecological context.

Methodology matters for comparing coarse wood and bark decay rates across tree species

Abstract The importance of wood decay for global carbon and nutrient cycles is widely recognized. However, relatively little is known about bark decay dynamics, even though bark represents up to 25% of stem dry mass. Moreover, bark presence versus absence can significantly alter wood decay rates. Therefore, it really matters for the fate of carbon whether variation in bark and wood decay rates is coordinated across tree species. Answering this question requires advances in methodology to measure both bark and wood mass loss accurately. Decay rates of large logs in the field are often quantified as loss in tissue density, in which case volume depletions of bark and wood can yield large underestimations. To quantify the real decay rates, we assessed bark mass loss per stem surface area and wood mass loss based on volume‐corrected density loss. We further defined the range of actual bark mass loss by considering bark cover loss. Then, we tested the correlation between bark and wood mass loss across 20 temperate tree species during 4 years of decomposition. The area‐based method generally showed more than 3‐fold higher bark mass loss than the density‐based method (even higher if considering bark cover loss), and volume‐corrected wood mass losses were 1.08–1.12 times higher than density‐based mass loss. The deviation of bark mass loss between the two methods was higher for tree species with thicker inner bark. Bark generally decomposed twice as fast as wood across species, and faster decaying bark came with faster decaying wood (R2 = 0.26, p = 0.006). We strongly suggest using corrected volume when assessing wood mass loss especially for the species with faster decomposable sapwood and all the wood at advanced decay stages. Further studies of coarse stem decomposition should consider trait ‘afterlife’ effects of inner bark and estimate fraction of stem bark cover to obtain more accurate decay rates. Our new method should benefit our understanding of the in situ dynamics of woody debris decay and monitoring research in different forest ecosystems world‐wide, and should aid meta‐analyses across diverse studies.

Inoculum volume effects on competitive outcome and wood decay rate of brown- and white-rot basidiomycetes

Theory predicts that the energetic cost of competition between fungal mycelia might accelerate or retard the rate of wood decomposition, depending on various factors. To evaluate the effect of occupied territory on wood decay rate and competitive outcome, we set up a pairing competition experiment using beech wood blocks colonised by three brown-rot and three white-rot basidiomycetes. All white-brown combinations (totalling nine), and five ratios of wood volume (4:0, 3:1, 2:2, 1:3, 0:4) were performed. Pairings were incubated in the dark at 20 °C for 3 months, and then competition outcome and wood weight loss were determined. Mycelia occupying larger territory were more competitive than mycelia occupying smaller territory. There were negative relationships between wood volume and percentage wood weight loss. Wood decay was slower at the competition front than at the rear of the wood blocks in some cases. These results suggest that wood volume (territory size) affects both competition outcome and wood decay rate in basidiomycete communities.

Wood decomposition is more strongly controlled by temperature than by tree species and decomposer diversity in highly species rich subtropical forests

While the number of studies on the role of biodiversity on ecosystem functioning is steadily increasing, a key component of biogeochemical cycling in forests, dead wood decay, has been largely neglected. It remains widely unknown whether and how dead wood decay is affected by diversity loss in forests. We studied the hierarchical effects of tree species diversity on wood decay rates in a subtropical forest landscape in southeast China via its influence on fungal OTU richness and invertebrate diversity using piecewise structural equation models. The experiment was conducted in natural forest plots that span a wide gradient of tree species diversity embedded in a heterogeneous topography. To account for interactions between macro‐invertebrates and fungi, that potentially modify the influence of tree biodiversity and climate on dead wood decay, we compared a macro‐invertebrate exclusion treatment with a control treatment that allowed access to all types of decomposers.Diversity effects of trees on wood decay rates were mostly negative and mediated by the diversity of macro‐invertebrates. However, the effects of tree species diversity or fungal OTU richness and macro‐invertebrate diversity on wood decay rates were comparatively weak. Temperature affected decay rates positively and had the strongest influence in all treatments. While the exclusion of macro‐invertebrates did not lead to a reduction of wood decay rates, our results suggest that they may however have a mediating role in the process. In the presence of invertebrates the predictability of wood decay rates was higher and we observed a tendency of a stronger temperature control.Our results suggest that there is evidence for diversity effects on wood decomposition, but the temperature control is still more important. Thus, an increase in mean annual temperature will increase carbon and nutrient turnover through wood decomposition in subtropical forest irrespective of biotic composition.

Exclusion of invertebrates influences saprotrophic fungal community and wood decay rate in an experimental field study

Abstract Decomposer communities perform an essential ecosystem function by recycling nutrients. However, the effect of higher trophic levels on microbial decomposer communities and rate of decomposition is poorly understood. We therefore conducted an exclusion experiment to test the effect of invertebrates on fungal decomposer communities in dead wood, repeated at 30 sites in two landscapes, and measured wood density to assess effect on decay rate. Invertebrates were excluded from recently cut logs by cages with a 1‐mm‐mesh net, and fungal communities in caged logs were compared to logs accessible to invertebrates by DNA metabarcoding analyses. Accessible logs included control logs, cage control logs and positive control logs. We found that exclusion of invertebrates had a significant effect on fungal community composition. For example, the wood decay fungi Trametes versicolor and T. ochraceawere significantly more abundant in accessible logs than in caged logs. The strongest effect on fungal community composition, however, was attributed to differing baseline conditions in the individual trees. When accounting for these baseline differences, caged logs had significantly higher wood density than control logs after 2 years, indicating lower rates of wood decay in caged logs. Further studies, spanning several years, are required to fully understand the influence of invertebrates on fungi and wood decay. However, our results indicate that invertebrates influence both the composition of saprotrophic communities in dead wood and their decomposition function, which is vital to forest ecosystems. A plain language summary is available for this article.

Decomposition Patterns of Foliar Litter and Deadwood in Managed and Unmanaged Stands: A 13-Year Experiment in Boreal Mixedwoods

Litter decomposition is a major driver of carbon (C) and nitrogen (N) cycles in forest ecosystems and has major implications for C sequestration and nutrient availability. However, empirical information regarding long-term decomposition rates of foliage and wood remains rare. In this study, we assessed long-term C and N dynamics (12–13 years) during decomposition of foliage and wood for three boreal tree species, under a range of harvesting intensities and slash treatments. We used model selection based on the second-order Akaike’s Information Criterion to determine which decomposition model had the most support. The double-exponential model provided a good fit to C mass loss for foliage of trembling aspen, white spruce, and balsam fir, as well as aspen wood. These litters underwent a rapid initial phase of leaching and mineralisation, followed by a slow decomposition. In contrast, for spruce and fir wood, the single-exponential model had the most support. The long-term average decay rate of wood was faster than that of foliage for aspen, but not of conifers. However, we found no evidence that fir and spruce wood decomposed at slower rates than the recalcitrant fraction of their foliage. The critical C:N ratios, at which net N mineralisation began, were higher for wood than for foliage. Long-term decay rates following clear-cutting were either similar or faster than those observed in control stands, depending on litter material, tree species, and slash treatment. The critical C:N ratios were reached later and decreased for all conifer litters following stem-only clear-cutting, indicating increased N retention in harvested sites with high slash loads. Partial harvesting had weak effects on C and N dynamics of decaying litters. A comprehensive understanding of the long-term patterns and controls of C and N dynamics following forest disturbance would improve our ability to forecast the implications of forest harvesting for C sequestration and nutrient availability.

Estimating Carbon Dynamics in an Intact Lowland Mixed Dipterocarp Forest Using a Forest Carbon Model

Intact dipterocarp forests in Asia act as crucial carbon (C) reservoirs, and it is therefore important to investigate the C dynamics in these forests. We estimated C dynamics, together with net ecosystem production (NEP), in an intact tropical dipterocarp forest of Brunei Darussalam. Fifty-four simulation units (plots; 20 m × 20 m) were established and initial C stocks were determined via direct field measurement. The C dynamics were annually simulated with a regression model and the Forest Biomass and Dead organic matter Carbon (FBDC) model. The initial C stock (Mg C·ha−1) of biomass, litter, dead wood and mineral soil were 213.1 ± 104.8, 2.0 ± 0.8, 31.3 ± 38.8, and 80.7 ± 15.5, respectively. Their annual changes (Mg C·ha−1·year−1) were 3.2 ± 1.1, 0.2 ± 0.2, −3.7 ± 6.1, and −0.3 ± 1.1, respectively. NEP was −0.6 ± 6.1 Mg C·ha−1·year−1, showing large heterogeneity among the plots. The initial C stocks of biomass and dead wood, biomass turnover rates and dead wood decay rates were elucidated as dominant factors determining NEP in a sensitivity analysis. Accordingly, investigation on those input data can constrain an uncertainty in determining NEP in the intact tropical forests.

Wood decay rates of 13 temperate tree species in relation to wood properties, enzyme activities and organismic diversities

Deadwood decay is an important ecosystem process in forest ecosystems, but the relative contribution of specific wood properties of tree species, activities of wood-degrading enzymes, and decomposer communities such as fungi and insects is unclear. We ask whether wood properties, in particular differences between angiosperms and gymnosperms, and organismic diversity of colonizers contribute to wood decomposition. To test this, we exposed deadwood logs of 13 tree species, covering four gymnosperms and nine angiosperm species, in 30 plots under different forest management in three regions in Germany. After a decomposition time of 6.5years Carpinus betulus and Fagus sylvatica showed the highest decay rates. We found a positive correlation of decay rate with enzyme activities, chemical wood properties (S, K concentration) and organismic diversity, while, heartwood character, lignin content, extractive concentration and phenol content were negatively correlated with decay rate across all 13 tree species. By applying a multi-model inference approach we found that the activity of the wood-degrading enzymes laccase and endocellulase, beetle diversity, heartwood presence, wood ray height and fungal diversity were the most important predictor variables for wood decay. Although we were not able to identify direct cause and effect relations by our approach, we conclude that enzyme activity and organismic diversity are the main drivers of wood decay rate, which greatly differed among tree species. Maintaining high tree species diversity will therefore result in high structural deadwood diversity in terms of decay rate and decay stage.