Wireless Sensor Network For Monitoring Research Articles

3D printed sub-terahertz photonic crystal for wireless passive biosensing

Monitoring pathogens has become a major challenge for society and research in recent years. Of great interest are refractive index sensors, which are based on the interaction between analytes and electromagnetic waves and allow label-free and fast detection. In addition, the electromagnetic waves can be exploited for wireless communication. However, current refractive index biosensors can only be read from a few centimeters. Here, we demonstrate an innovative concept of a passive wireless sensor based on a sub-terahertz photonic crystal resonator. The fabricated sensors have a reading range of up to 0.9 m and elevation and azimuth acceptance angles of around 90°. We demonstrate the stand-off detection of sub-µm thin-film proteins as test analytes. The proposed wireless sensor opens the door to a non-electronic, compact, and low-cost solution and can be extended to a wireless sensor network monitoring airborne pathogen, which may provide a pre-infection detection to prevent their spread efficiently.

An efficient dual layer data aggregation scheme in clustered wireless sensor networks

AbstractIn wireless sensor network (WSN) monitoring systems, redundant data from sluggish environmental changes and overlapping sensing ranges can increase the volume of data sent by nodes, degrade the efficiency of information collection, and lead to the death of sensor nodes. To reduce the energy consumption of sensor nodes and prolong the life of WSNs, this study proposes a dual layer intracluster data fusion scheme based on ring buffer. To reduce redundant data and temporary anomalous data while guaranteeing the temporal coherence of data, the source nodes employ a binarized similarity function and sliding quartile detection based on the ring buffer. Based on the improved support degree function of weighted Pearson distance, the cluster head node performs a weighted fusion on the data received from the source nodes. Experimental results reveal that the scheme proposed in this study has clear advantages in three aspects: the number of remaining nodes, residual energy, and the number of packets transmitted. The data fusion of the proposed scheme is confined to the data fusion of the same attribute environment parameters.

A fuzzy trust management mechanism with dynamic behavior monitoring for wireless sensor networks

A fuzzy trust management mechanism with dynamic behavior monitoring for wireless sensor networks

Smart Water Quality Monitoring with IoT Wireless Sensor Networks.

Traditional laboratory-based water quality monitoring and testing approaches are soon to be outdated, mainly because of the need for real-time feedback and immediate responses to emergencies. The more recent wireless sensor network (WSN)-based techniques are evolving to alleviate the problems of monitoring, coverage, and energy management, among others. The inclusion of the Internet of Things (IoT) in WSN techniques can further lead to their improvement in delivering, in real time, effective and efficient water-monitoring systems, reaping from the benefits of IoT wireless systems. However, they still suffer from the inability to deliver accurate real-time data, a lack of reconfigurability, the need to be deployed in ad hoc harsh environments, and their limited acceptability within industry. Electronic sensors are required for them to be effectively incorporated into the IoT WSN water-quality-monitoring system. Very few electronic sensors exist for parameter measurement. This necessitates the incorporation of artificial intelligence (AI) sensory techniques for smart water-quality-monitoring systems for indicators without actual electronic sensors by relating with available sensor data. This approach is in its infancy and is still not yet accepted nor standardized by the industry. This work presents a smart water-quality-monitoring framework featuring an intelligent IoT WSN monitoring system. The system uses AI sensors for indicators without electronic sensors, as the design of electronic sensors is lagging behind monitoring systems. In particular, machine learning algorithms are used to predict E. coli concentrations in water. Six different machine learning models (ridge regression, random forest regressor, stochastic gradient boosting, support vector machine, k-nearest neighbors, and AdaBoost regressor) are used on a sourced dataset. From the results, the best-performing model on average during testing was the AdaBoost regressor (a MAE¯ of 14.37 counts/100 mL), and the worst-performing model was stochastic gradient boosting (a MAE¯ of 42.27 counts/100 mL). The development and application of such a system is not trivial. The best-performing water parameter set (Set A) contained pH, conductivity, chloride, turbidity, nitrates, and chlorophyll.

Landslide monitoring and prediction system using geosensors and wireless sensor network

Landslides in hilly regions are a frequently occurring natural phenomenon which takes a heavy toll of human lives and causes damage to different properties. Hence, prediction of landslide is essential for averting its deleterious effects by providing early warning to neighboring residents about the impending hazard of landslide. A landslide monitoring system has been designed using geosensors and high-range wireless network for on-line monitoring and prediction of landslides with the application of multivariate statistical analysis of prevailing site parameters. The system consists of various geosensors, wireless sensor network, server, and landslide monitoring and forecasting software. Crackmeter, in-place inclinometer, raingauge, tiltmeter, piezometer and other sensors are set up in the selected hill slope prone to landslide for continuous monitoring of influencing parameters. The system measures real-time landslide parameters using the said geosensors connected with wireless nodes and establishing a dynamic wireless network to overcome redundancy issue using wireless nodes of around 1200 m communication range using a high performance low power microcontroller, integrated solar panel and additional external omni-directional antenna for monitoring landslide in a large and hazardous hilly region from a distant safer location. The application software consists of different modules, namely data monitoring, analysis, storing, viewing, prediction, and generation of audio-visual, SMS and email alerts for 3 levels of landslides situations. The paper enumerates the system architecture and the application software details.Graphical

A Review for Forest Fire Monitoring in Wireless Sensor Networks

Due to the occurrence of global warming forest fires more frequent, the damage caused was shocking in recent years. In order to reduce this natural disaster, forest monitoring as an important part of forest fire prevention, which is also more valued by the public and adopts the wireless sensor network as a new type of monitoring methods. This system can form a large range of real-time detection network throughout the sensing nodes, provide great convenience for protective workers. However, this technology still has some drawbacks, such as the endurance ability and the accuracy of locating the fire source, so this paper analyzes the problem, and provides a solution.

A Novel Lie Hypergraph Based Lifetime Enhancement Routing Protocol for Environmental Monitoring in Wireless Sensor Networks

Wireless sensor network (WSN) is a rapid surging technology promising many fruitful innovations for the user community. The use of WSNs for continuous monitoring of environmental factors in severe situations, such as detection of volcanoes, forest fires, floods, and so on. Despite WSN’s various potential applications, energy and deployment are two major concerns influencing the network life span. The primary requirement is to monitor node energy consumption in order to improve network performance. Many approaches are proposed in recent times for energy efficiency, this article introduces an associated hypergraph with Lie algebra of upper triangular matrices for energy efficient clustering and routing. Initially, the sensor nodes are formulated as a hypergraph, and each hyperedge is treated as a cluster, from which cluster-head (CH) selection is exploited by minimum hypergraph transversal. The routing decision is employed by constructing the upper triangular matrix (UTM), and Lie commutators of the UTM Lie algebra identifies the best relay nodes for data forwarding. The performance of the proposed work is evaluated using simulation results which shows the effectiveness of the scheme over compared protocols in terms of, number of alive nodes, energy consumption and number of packets received in BS.

Enhancing Data Privacy in Wireless Sensor Networks: Investigating Techniques and Protocols to Protect Privacy of Data Transmitted Over Wireless Sensor Networks in Critical Applications of Healthcare and National Security

The article discusses the emergence of Wireless Sensor Networks (WSNs) as a groundbreaking technology in data processing and communication. It outlines how WSNs, composed of dispersed autonomous sensors, are utilized to monitor physical and environmental factors, transmitting data wirelessly for analysis. The article explores various applications of WSNs in healthcare, national security, emergency response, and infrastructure monitoring, highlighting their roles in enhancing patient care, public health surveillance, border security, disaster management, and military operations. Additionally, it examines the foundational concepts of data privacy in WSNs, focusing on encryption techniques, authentication mechanisms, anonymization techniques, and access control mechanisms. The article also addresses vulnerabilities, threats, and challenges related to data privacy in healthcare and national security contexts, emphasizing regulatory compliance, ethical considerations, and socio-economic factors. Furthermore, it introduces the Diffusion of Innovation Theory as a framework for understanding the adoption of privacy-enhancing technologies in WSNs. Finally, the article reviews empirical studies demonstrating the efficacy of security solutions in preserving data privacy in WSNs, offering insights into advancements in safeguarding sensitive information.

Flexible Sensing Enabled Nondestructive Detection on Viability/Quality of Live Edible Oyster.

Environmental and physiological fluctuations in the live oyster cold chain can result in reduced survival and quality. In this study, a flexible wireless sensor network (F-WSN) monitoring system combined with knowledge engineering was designed and developed to monitor environmental information and physiological fluctuations in the live oyster cold chain. Based on the Hazard Analysis and Critical Control Point (HACCP) plan to identify the critical control points (CCPs) in the live oyster cold chain, the F-WSN was utilized to conduct tracking and collection experiments in real scenarios from Yantai, Shandong Province, to Beijing. The knowledge model for shelf-life and quality prediction based on environmental information and physiological fluctuations was established, and the prediction accuracies of TVB-N, TVC, and pH were 96%, 85%, and 97%, respectively, and the prediction accuracy of viability was 96%. Relevant managers, workers, and experts were invited to participate in the efficiency and applicability assessment of the established system. The results indicated that combining F-WSN monitoring with knowledge-based HACCP modeling is an effective approach to improving the transparency of cold chain management, reducing quality and safety risks in the oyster industry, and promoting the sharing and reuse of HACCP knowledge in the oyster cold chain.

Secure and scalable data aggregation techniques for healthcare monitoring in WSN

Wireless Sensor Networks (WSN) are crucial in the healthcare field as they allow for the immediate monitoring and collection of data from medical sensors. The growing incorporation of WSN in healthcare requires the creation of authentication protocols that are both strong and energy-efficient. This study presents Lightweight Authentication Protocol for Cloud-based Health-care Systems (LAPCHS) using BLAKE2 designed specifically for WSN in medical settings for secure and scalable data aggregation. The proposed method tackles the difficulties presented by limited resources in sensor nodes, with the goal of achieving a careful equilibrium between strong security and effective energy usage. LAPCHS utilizes innovative techniques to improve the energy efficiency in WSN. The system employs the BLAKE2 cryptographic hash algorithm to establish robust mutual authentication and key agreement between the tag and the cloud server. The protocol is characterized by its low weight and high efficiency, rendering it appropriate for deployment in medical sensor networks with limited resources, which minimizes the need for global key distribution and decreases communication overhead. The proposed method is useful to meet the distinct needs of medical sensor networks, where energy preservation is of utmost importance to ensure extended device scalability. The findings demonstrate that LAPCHS surpasses current approaches in terms of energy efficiency and latency, while simultaneously upholding a robust level of security. The protocol’s novel strategy for managing encryption keys and selecting cryptographic algorithms makes it a promising solution for securing medical sensor networks while maintaining energy sustainability. This study makes a valuable contribution to the developing field of WSN security by proposing a practical solution for ensuring strong and energy-efficient authentication in healthcare applications.

Innovative Homomorphic Sorting of Environmental Data in Area Monitoring Wireless Sensor Networks

Innovative Homomorphic Sorting of Environmental Data in Area Monitoring Wireless Sensor Networks

Several Categories of Energy Harvested Routing Protocols, Challenges, and Characteristics in WSN: A Review

The routing protocol is a technique for determining the most efficient channel for data transmission. The route selection procedure, which relies on the kind of network, channel conditions, and measurement systems, presents several challenges. Routing is essential in Wireless Sensor Networks (WSNs) for environmental monitoring, traffic monitoring, and other applications. WSNs are small nodes that can sense, interpret data, and communicate wirelessly. Many routing, power control, and data dissemination techniques have been developed specifically for WSNs, where energy efficiency is a crucial design factor.
 On the other hand, the focus has been on energy harvesting and standard routing methods, which can vary depending on the design and network architecture. In a Wireless Sensor Network (WSN), the data collected by the sensor nodes is typically transferred to the base station, which connects the sensor network to other networks (such as the internet), where it is processed and necessary action is taken. WSN has recently been developed to allow various applications, including traffic enforcement building automation, smart warfare, environmental sensing, and many more.WSN integrates several sensors or nodes deployed around a specific node to perform computational processes.

A Neural Network-Based Weighted Voting Algorithm for Multi-Target Classification in WSN.

One of the most important applications in the wireless sensor networks (WSN) is to classify mobile targets in the monitoring area. In this paper, a neural network(NN)-based weighted voting classification algorithm is proposed on the basis of the NN-based classifier and combined with the idea of voting strategy, which is implemented on the nodes of the WSN monitoring system by means of the "upper training, lower transplantation" approach. The performance of the algorithm is verified by using real-world experimental data, and the results show that the proposed method has a higher accuracy in classifying the target signal features, achieving an average classification accuracy of about 85% when utilizing a deep neural network (DNN) and deep belief network (DBN) as the base classifier. The experiment reveals that the NN-based weighted voting algorithm enhances the target classification accuracy by approximately 5% in comparison to the single NN-based classifier, but the memory and computation time required for the algorithm to run are also increased at the same time. Compared to the FFNN classifier, which exhibited the highest classification accuracy among the four selected methods, the algorithm achieves an improvement of approximately 8.8% in classification accuracy. However, it incurs greater overhead time to run.

Additively manufactured magic cube platforms for fully integrated wireless sensing nodes for Internet of Things applications

Wireless sensor networks for environmental monitoring are a key feature in developing the Internet of Things. Although there has been much research in developing components for wireless sensing nodes, advances in creating fully integrated sensing nodes is limited. Furthermore, because most sensing nodes that have been developed are intended to perform a fixed task, each new effort to design an integrated sensing node with different functionality must start from scratch. Here we introduce a broadly applicable platform for the development and production of fully integrated wireless sensing nodes. The platform is an additively manufactured cube that has different subsystems occupying separate faces of the 3D structure. While both additively manufactured sensors and cube-shaped wireless sensing nodes have been previously reported, these two approaches have yet to be combined. A key technology that enables this is the use of additively manufactured, nonplanar bent microstrips. This realization offers a “plug-and-play” approach to sensor node design, as the subsystems are considered modular and can be swapped to alter the function of the device. Implementing this concept enables the rapid development and deployment of wireless sensor networks.

Location Privacy Protection and Coverage Hole Effects in Event Monitoring Wireless Networks for Internet of Things Applications

Source-location privacy (SLP) protection improves security in event monitoring wireless sensor networks (WSNs) for Internet of Things (IoT) applications. However, due to constrained energy resources, WSNs incur coverage holes that affect the level of SLP protection. Existing studies have ineffectively analysed the effects of coverage holes on SLP protection. Noting the limitation, this study investigated the coverage hole effects. Performance of various SLP routing protocols was evaluated based on the sensor node utilization ratio, attack success rate, end-to-end delay, and packet delivery ratio. Then, considering the challenge of limited battery power in IoT sensors, the performance gains and limitations of the protocols were identified. Simulation results demonstrate that the data dissemination SLP routing protocol (DIRP) outperforms other protocols. However, the performance of DIRP is significantly affected by coverage holes. The results suggest that for DIRP to be viable in IoT applications, the integration of distributed energy resources should be considered.

Autonomous configuration establishment method of wireless network on condition monitoring for coupling and decoupling of railway vehicles

AbstractIn recent years, with the development of IoT, research and development of wireless sensor networks for monitoring has been advanced to monitor the condition of various devices in railway vehicles and notify train crews. In the operation of railway vehicles, the composition may be changed at stations by coupling and decoupling, and it is necessary to set up inter‐vehicle wireless network considering them. Therefore, to transmit sensor data in railway vehicles, we propose an autonomous configuration establishment method of wireless network for railway vehicles considering coupling and decoupling.

Multilevel Adaptive Near-Lossless Compression in Edge Collaborative Wireless Sensor Networks for Mechanical Vibration Monitoring

To address the difficulties of severe lack of storage and computational resources and high delay of transmitting massive vibration data in wireless sensor networks (WSN) for mechanical vibration monitoring (MVM), this paper proposes a novel multilevel adaptive near-lossless compression in edge collaborative WSN (MANLC-ECWSN) for MVM, which could effectively solve the above problems. On the one hand, the sparse pattern of mechanical fault signals is analyzed. A multi-level adaptive near-lossless compression (MANLC) method is proposed to characterize mechanical fault feature information with high accuracy in low storage space, and the proposed method is implemented on the self-developed acquisition node (AN), which effectively improves the storage space and transmission efficiency. On the other hand, the edge computing (EC) technique is integrated into WSN, and data reconstruction and high-precision feature detection are efficiently implemented on the self-developed edge computing node (ECN), which effectively reduces the storage and computing pressure of the data center server. The comprehensive experiments demonstrate that high precision data reconstruction and feature detection could be achieved in the proposed approach from measurements that occupy a little storage space of the AN. The computational power and transmission efficiency of WSN are significantly improved, which provides a potential solution for practical engineering applications.

A Low-Cost Wireless Sensor Network for Barn Climate and Emission Monitoring—Intermediate Results

A barn’s climate is vital for animal welfare and emissions control, including greenhouse gases like methane (CH4) and carbon dioxide (CO2) and environmental gases like ammonia (NH3). The goal of this study was to investigate a developed low-cost online tool for monitoring barn climate and air pollutant emissions (OTICE) in naturally ventilated barns. OTICE employed a wireless sensor network with low-cost sensors for gases and climate variables, allowing scalable use across multiple barns. We evaluated the sensors for CO2, NH3, and CH4 for accuracy, both in controlled lab conditions and in a dairy barn in Germany, where measurements were carried out continuously for a duration of 12 days. For the averaged concentration levels over the measurement period, the low-cost sensors agreed well with the reference system, with relative deviations lower than 7% for all three gases, with maximum peak deviations up to 32% for CO2, 67% for NH3, and 65% for CH4, with strong Spearman correlations for CO2 and NH3 (ρCO2 = 0.8, ρNH3 = 0.68) and a rather weak correlation for CH4 with ρCH4 = 0.24. Further calibration and stability investigations are required, especially for CH4 sensing. However, the overall good results for NH3 and especially CO2 measurements indicate a huge potential of the low-cost system as a valuable tool for monitoring relative NH3 emission levels and the measurement of air exchange rates in naturally ventilated barns.

Unmanned Aerial Vehicle-Based Compressed Data Acquisition for Environmental Monitoring in WSNs.

With the increasing concerns for the environment, the amount of the data monitored by wireless sensor networks (WSNs) is becoming larger and the energy required for data transmission is greater. However, sensor nodes have limited storage capacity and battery power. The WSNs are faced with the challenge of handling larger data volumes while minimizing energy consumption for transmission. To address this issue, this paper employs data compression technology to eliminate redundant information in the environmental data, thereby reducing energy consumption of sensor nodes. Additionally, an unmanned aerial vehicle (UAV)-assisted compressed data acquisition algorithm is put forward. In this algorithm, compressive sensing (CS) is introduced to decrease the amount of data in the network and the UAV serves as a mobile aerial base station for efficient data gathering. Based on CS theory, the UAV selectively collects measurements from a subset of sensor nodes along a route planned using the optimized greedy algorithm with variation and insertion strategies. Once the UAV returns, the sink node reconstructs sensory data from these measurements using the reconstruction algorithms. Extensive experiments are conducted to verify the performance of this algorithm. Experimental results show that the proposed algorithm has lower energy consumption compared to other approaches. Furthermore, we employ different data reconstruction algorithms to recover data and discover that the data can be better reconstructed in a shorter time.

MO-CBACORP: A new energy-efficient secure routing protocol for underwater monitoring wireless sensor network

With the rapid progress of sensor technology, underwater monitoring wireless sensor network (UMWSN) equipped with water resource monitoring capabilities have surfaced. UMWSN is currently emerging as a popular research and application area, with a wide range of applications in various fields, including but not limited to disaster warning, pollutant monitoring and hydrological data monitoring. However, due to the limited size and computing power of wireless sensors, UMWSN are exceedingly susceptible to network security attacks by contaminating entities. In order to tackle the problems of inadequate security, elevated network energy consumption, and high system latency in existing QoS routing research, this paper puts forward an innovative multi-objective routing protocol named multi-objective chaotic Boltzmann ant colony optimization routing protocol (MO-CBACORP). MO-CBACORP can minimize the energy consumption of sensor nodes in UMWSN routing, thereby effectively diminishing system latency and significantly enhancing routing security. During the routing optimization process, MO-CBACORP proposed an innovative design of the chaos operator and Boltzmann selection strategy, which effectively avoids the issue of being stuck in local optimal solutions and greatly enhances the convergence speed of the algorithm. Additionally, a novel experiment for underwater monitoring environments is presented that precisely replicates underwater monitoring conditions and attack scenarios. According to the experimental results, MO-CBACORP exhibits superior performance compared to the latest state-of-the-art research including THOA-MHR, ACO-MCMC, and MAP-ACO, with a minimum improvement of 7.25%, 9.31%, and 7.68% in terms of route security, network energy consumption, and delay, respectively. All in all, MO-CBACORP exhibits superior performance compared to the three latest research algorithms.