Wireless-powered Cooperative Communication Network Research Articles

Wireless Powered Cooperative Communication Network for Dual-Hop Uplink NOMA With IQI and SIC Imperfections

Wireless Powered Cooperative Communication Network for Dual-Hop Uplink NOMA With IQI and SIC Imperfections

Modeling and Performance Analysis of ECS-HTCARQ Protocol in Interference Scenario

To extend the lifetime of energy-constrained wireless networks, this paper proposes a three-node model of the wireless-powered cooperative communication network (WPCCN). The model consists of an energy-constrained source node, an energy-sufficient relay node, and a destination node and considers two different cochannel interference (CCI) sources at the relay and destination nodes. To ensure the reliability of data transmission, we introduce the cooperative automatic retransmission request (CARQ) protocol, propose the energy-constrained source that harvests and cooperates automatic retransmission request (ECS-HTCARQ) protocol in interference scenario, derive a closed-form expression for the outage probability under Rayleigh fading channels, and establish a discrete-time Markov chain (DTMC) model to analyze the system throughput. The relationship between parameters such as the energy harvesting time allocation factor and energy harvesting efficiency on the outage probability and the system throughput is obtained. Numerical results show that the difference in system throughput is small as the increasing number of transmissions at a high signal-to-interference ratio (SIR), but there is a significant reduction in the outage probability. Finally, the optimal value of the energy harvesting time allocation factor is given under this model.

Secure Multiuser Scheduling for Hybrid Relay-Assisted Wireless Powered Cooperative Communication Networks With Full-Duplex Destination-Based Jamming

In this paper, we investigate secure communication in a hybrid relay (HR)-assisted wireless powered cooperative communication network (WPCCN), where an eavesdropper tries to intercept the data transmitted by a source user and the HR simultaneously. The HR has the ability to wireless powered the energy-constrained multiple users in the downlink and to relay the received confidential information in the uplink. In particular, the full-duplex destination-based jamming (FD-DBJ) strategy is exploited to improve the secrecy performance. Moreover, in order to conduct effective secure communications, we design two multiuser scheduling schemes, i.e., random user selection (RUS), and best user selection (BUS) based on the main channel quality. In order to evaluate the secrecy performance, we analytically derive the energy outage probability (EOP), the secrecy outage probability (SOP), and the hybrid outage probability (HOP), respectively. As such, we formulate the secrecy throughput (ST) maximization problem to optimize the predetermined transmission rate. Our analysis and numerical results reveal that: 1) The BUS scheme has better security performance. 2) Both of the energy conversion efficiency and the number of users have a positive effect on secrecy performance. 3) The FD-DBJ scheme is an effective method to achieve secure communications. 4) The time-switching factor and predetermined transmission rate have a crucial influence on the secrecy performance, which should be considered carefully in system design.

Optimal Relay Selection Scheme with Multiantenna Power Beacon for Wireless-Powered Cooperation Communication Networks.

Unlike the fixed power grid cooperative networks, which are mainly based on the reception reliability parameter while choosing the best relay, the wireless-powered cooperative communication network (WPCCN) and in addition to the reception reliability the transmission requirement consideration is important for relay selection schemes. Hence, enabling efficient transmission techniques that address high attenuation of radio frequency (RF) signals according to the distance without increasing the total transmission power is an open issue worth studying. In this relation, a multiantennas power beacon (PB) that assists wireless-powered cooperative communication network (PB-WPCCN) is studied in this paper. The communication between source and destination is achieved with the aid of multiple relays, where both the source and the multiple relays need to harvest energy from the PB in the first place to enable their transmission functionalities. A novel relay selection scheme is proposed, named as two-round relay selection (2-RRS), where a group of relays that successfully decode the source information is selected in the first round selection. In the second round, the optimal relay is selected to forward the recorded information to the destination. The proposed 2-RRS scheme is compared with two existing relay selection schemes, i.e., partial relay selection (PRS) and opportunistic relay selection (ORS). The analytical closed-form expressions of outage probability and average system throughput are derived and validated by numerical simulation. The comparison results between different relay selection schemes show: (I) The superiority of the proposed 2-RRS scheme as it achieves around 17% better throughput compared to the conventional ORS scheme and 40% better than the PRS scheme, particularly when PB transmit power is 10 dB; (II) The proposed 2-RRS scheme guarantees the lowest outage probability, especially when the PB is equipped with multiantennas and performs beamforming technique; (III) The optimal localisation of the PB between the source and N relays depends on the adopted relay selection scheme; (IV) The exhaustive search of the maximum system throughput value shows that the proposed 2-RRS scheme required shorter energy harvesting time compared to other schemes. The increase in energy harvesting time and number of relays do not necessarily reflect positively on the system throughput performance; hence tradeoffs should be taken into consideration.

Secure Wireless Powered Cooperative Communication Networks With Finite Energy Storage

This paper investigates secure transmission in a wireless powered cooperative communication network (WPCCN) over Nakagami- $m$ fading channels, where multiple intermediate energy harvesting (EH) nodes with finite energy storage are deployed to assist the secure transmission between source and destination in the presence of an eavesdropper. Specifically, the intermediate EH nodes first harvest and accumulate energy from the source's signal and then forward the confidential signal or emit jamming signal to interfere the eavesdropper according to actual requirements. In order to exploit the intermediate EH nodes for secure improvement, considering both energy storage status and channel gains, three relay-and-jammer selection schemes at the intermediate nodes are proposed, namely: energy threshold based best-relay and random-jammer (ETBR), energy threshold based random-relay and best-jammer (ETRB), and energy threshold based best-relay and best-jammer (ETBB). For understanding the impact of critical parameters on the secrecy performance, we first capture the evolution of the EH nodes’ storages using finite-state Markov chain (FSMC) and then derive the analytical expressions for hybrid outage probability (HOP) and secrecy throughput (ST). Furthermore, numerical results demonstrate that our proposed selection schemes outperform the existing schemes (bR-rJ, rR-bJ, bR-bJ) due to the consideration of energy accumulation and storage status. In addition, there is a suitable value of the energy threshold for each proposed scheme to achieve the optimal secrecy performance.

Outage and Bit Error Probability Analysis in Energy Harvesting Wireless Cooperative Networks

This study focuses on a wireless powered cooperative communication network (WPCCN), which includes a hybrid access point (HAP), a source and a relay. The considered source and relay are installed without embedded energy supply (EES), thus are dependent on energy harvested from signals from the HAP to power their cooperative information transmission (IT). Taking inspiration from this, the author group investigates into a harvest-then-cooperate (HTC) protocol, whereas the source and the relay first harvest the energy from the AP in a downlink (DL) and then collaboratively work in uplink (UL) for IT of the source. For careful evaluation of the system performance, derivations of the approximate closed-form expression of the outage probability (OP) and an average bit error probability (ABER) for the HTC protocol over Rayleigh fading channels are done. Lastly, the author group performs Monte-Carlo simulations to reassure the numerical results they obtained.

Relaying Protocols and Delay Analysis for Buffer-aided Wireless Powered Cooperative Communication Networks

In this paper, we investigate a buffer-aided wireless powered cooperative communication network (WPCCN), in which the source and relay harvest the energy from a dedicated power beacon via wireless energy transfer, then the source transmits the data to the destination through the relay. Both the source and relay are equipped with an energy buffer to store the harvested energy in the energy transfer stage. In addition, the relay is equipped with a data buffer and can temporarily store the received information. Considering the buffer-aided WPCCN, we propose two buffer-aided relaying protocols, which named as the buffer-aided harvest-then-transmit (HtT) protocol and the buffer-aided joint mode selection and power allocation (JMSPA) protocol, respectively. For the buffer-aided HtT protocol, the time-averaged achievable rate is obtained in closed form. For the buffer-aided JMSPA protocol, the optimal adaptive mode selection scheme and power allocation scheme, which jointly maximize the time-averaged throughput of system, are obtained by employing the Lyapunov optimization theory. Furthermore, we drive the theoretical bounds on the time-averaged achievable rate and time-averaged delay, then present the throughput-delay tradeoff achieved by the joint JMSPA protocol. Simulation results validate the throughput performance gain of the proposed buffer-aided relaying protocols and verify the theoretical analysis.

Joint Resource Allocation Scheme for OFDM Wireless-Powered Cooperative Communication Networks

Energy harvesting techniques, particularly radio frequency energy harvesting (RF-EH) techniques, which are known to provide feasible solutions to enhance the performance of energy constrained wireless communication systems, have gained increasing attention. In this paper, we consider a wireless-powered cooperative communication network (WPCCN) for transferring energy in the downlink and forwarding signals in the uplink. The objective is to maximize the average transmission rate of the system, subject to the total network power constraint. We formulate such a problem as a form of wireless energy transmission based on resource allocation that searches for the joint subcarrier pairing and the time and power allocation, and this can be solved by using a dual approach. Simulation results show that the proposed joint optimal scheme can efficiently improve system performance with an increase in the number of subcarriers and relays.

User cooperation for enhanced throughput fairness in wireless powered communication networks

This paper studies a novel user cooperation method in a wireless powered cooperative communication network (WPCN) in which a pair of distributed terminal users first harvest wireless energy broadcasted by one energy node and then use the harvested energy to transmit information to a destination node (DN). In particular, the two cooperating users exchange their independent information with each other so as to form a virtual antenna array and transmit jointly to the DN. By allowing the users to share their harvested energy to transmit each other's information, the proposed method can effectively mitigate the inherent user unfairness problem in WPCN, where one user may suffer from very low data rate due to poor energy harvesting performance and high data transmission consumptions. Depending on the availability of channel state information at the transmitters, we consider the two users cooperating using either coherent or non-coherent data transmissions. In both cases, we derive the maximum common throughput achieved by the cooperation schemes through optimizing the time allocation on wireless energy transfer, user message exchange, and joint information transmissions in a fixed-length time slot. We also perform numerical analysis to study the impact of channel conditions on the system performance. By comparing with some existing benchmark schemes, our results demonstrate the effectiveness of the proposed user cooperation in a WPCN under different application scenarios.

Harvest-Then-Cooperate: Wireless-Powered Cooperative Communications

In this paper, we consider a wireless-powered cooperative communication network consisting of one hybrid access-point (AP), one source, and one relay. In contrast to conventional cooperative networks, the source and relay in the considered network have no embedded energy supply. They need to rely on the energy harvested from the signals broadcasted by the AP for their cooperative information transmission. Based on this three-node reference model, we propose a harvest-then-cooperate (HTC) protocol, in which the source and relay harvest energy from the AP in the downlink and work cooperatively in the uplink for the source's information transmission. Considering a delay-limited transmission mode, the approximate closed-form expression for the average throughput of the proposed protocol is derived over Rayleigh fading channels. Subsequently, this analysis is extended to the multi-relay scenario, where the approximate throughput of the HTC protocol with two popular relay selection schemes is derived. The asymptotic analyses for the throughput performance of the considered schemes at high signal-to-noise radio are also provided. All theoretical results are validated by numerical simulations. The impacts of the system parameters, such as time allocation, relay number, and relay position, on the throughput performance are extensively investigated.