Wire Model Research Articles

Optimization of MOSFET Copper Clip to Enhance Thermal Management Using Kriging Surrogate Model and Genetic Algorithm

Metal–oxide–semiconductor field-effect transistors (MOSFETs) are critical in power electronic modules due to their high-power density and rapid switching capabilities. Therefore, effective thermal management is crucial for ensuring reliability and superior performance. This study used finite element analysis (FEA) to evaluate the electro-thermal behavior of MOSFETs with copper clip bonding, showing a significant improvement over aluminum wire bonding. The aluminum wire model reached a maximum temperature of 102.8 °C, while the copper clip reduced this to 74.6 °C. To further optimize the thermal performance, Latin Hypercube Sampling (LHS) generated diverse design points. The FEA results were used to select the Kriging regression model, chosen for its superior accuracy (MSE = 0.036, R2 = 0.997, adjusted R2 = 0.997). The Kriging model was integrated with a Genetic Algorithm (GA), further reducing the maximum temperature to 71.5 °C, a 4.20% improvement over the original copper clip design and a 43.8% reduction compared to aluminum wire bonding. This integration of Kriging and the GA to the MOSFET copper clip package led to a significant improvement in the heat dissipation and overall thermal performance of the MOSFET package, while also reducing the computational power requirements, providing a reliable and efficient solution for the optimization of MOSFET copper clip packages.

High Quality Factor Miniaturized CMOS Transmission Lines Using Cascaded T-Networks for 60 GHz Millimeter Wave Applications

This work presents an on-chip 60 GHz lumped element transmission line (TL) using cascaded T-networks with a high Quality factor. Each T-network consists of a series inductance with a shunt capacitance at its center. We have derived the design equations for this TL configuration and proved that a TL whose electrical length ≥ 60° achieves additional miniaturization when implemented with three or more cascaded T-networks. The inductance is implemented using a straight wire model with no ground below it, while the capacitance is implemented using a parallel plate model with a grounding pedestal. Both configurations guarantee maximum inductance per unit length and capacitance per unit area to further improve the miniaturization level. A quarter wavelength TL with three cascaded T-networks is fabricated as proof of concept. The measured and simulated results of the fabricated TL have good agreement, and the measured quality factor is 17 at 60 GHz.

Magnetic Sensor Array for Electric Arc Reconstruction in Circuit Breakers.

Noninvasive imaging of circuit breakers under short-circuit testing is addressed by recording the magnetic field produced over an array of external sensors and by solving an inverse problem to identify the causing current distribution. The temporal and spatial resolution of the sensing chain are studied and implemented in a physical set-up. A wire model is adopted to describe electrical current distribution. Additionally, the simpler, more direct approach to evaluating the passage of electric current in front of sensors is proposed. The dynamics of suitable approximating models of the electric arc that forms across contacts is obtained and agrees with multi-physical simulations and with experimental time histories of current and voltage. The two methods are flexible and allow the analysis of different types of circuit breakers.

Fluid-structure interaction modeling of dry wire drawing by coupling OpenFOAM models of lubricant film and metal wire

Fluid-structure interaction modeling of dry wire drawing by coupling OpenFOAM models of lubricant film and metal wire

Analytical and numerical calculation of the effect of edge states of the Kane-Mele model on the RKKY interaction

In this paper, we investigate the Kane-Mele model and endeavor to demonstrate, through analytical calculations, how the presence of topological edge states influences the RKKY interaction. We illustrate that the effect diminishes as one moves away from the edges. To facilitate our analytical approach, we initially utilize a one-dimensional wire exhibiting linear dispersion for each spin as an approximation to the Kane-Mele model. We examine its impact on the RKKY interaction. Subsequently, we establish a correspondence between the edge states of the Kane-Mele model and a one-dimensional quantum wire model, wherein the coupling strength diminishes with increasing distance from the edges. Finally, we compare the analytical results with numerical findings obtained using the Landauer-Buttiker formulation.

The impacts of thermocouple insulation failure on the accuracy of temperature measurement data in forensic fire-death scenarios-Part II: Low electrical resistance and contamination.

Part II of this two-part article investigates the impact of thermocouple insulation failure on temperature measurement data in forensic fire-death scenarios. Two different models of glass fiber-insulated thermocouple wires (GG-K-24-SLE and HH-K-24 from Omega Engineering) were passed through a ceramic kiln at temperatures up to 1093°C to measure an ice bath at a constant 0°C. In a separate experiment, the same two models of thermocouple wire plus a BLMI-XL-K-18U-120 mineral-insulated metal-sheathed thermocouple probe were passed through a wood pallet fire to measure an ice bath. In the ceramic kiln, the effect on measurement errors was determined for short vs. long exposure lengths and clean insulation vs. insulation contaminated with pork fat. Glass fiber-insulated thermocouple wires showed severe failure in both experiments, with errors ranging from -270°C to almost 2200°C. The metal-sheathed probe showed no evidence of insulation failure and continued to accurately measure the ice bath temperature within expected margins of error around 0°C. This study highlights how exposure of inadequate thermocouples to fire-level temperatures produces severe errors in temperature data. Consequently, it will not be possible to use this data to draw any accurate conclusions about the effects of fire exposure to human donors or animal proxies.

Global RC Interconnects with ADL Buffers for Low-Power Applications

Introduction: Interconnects are an essential requirement for any circuit completion. They are utilised to connect two or more blocks, yet when creating a circuit, certain problems have been observed. Scaling back technology is one such problem. Methods: With technology scaled down their aspects change which can straightforwardly affect the circuit boundaries. Because of this, the time constant and power consumption in the interconnect circuits has increased. Certain wire (RC) models and techniques have previously been characterized to control these performance parameters however in this paper, authors have proposed a new interconnect structure with a buffer insertion technique using adiabatic dynamic logic (ADL). Results: To optimise power, a Schmitt trigger is inserted as a buffer between lengthy interconnect circuits utilising an energy-recovery mechanism. The TSPICE tool is used to model and simulate the entire circuit. Conclusion: The suggested model's performance is compared to that of other cutting-edge methods.

Study on corona discharge on the grounding wire of ±1100 kV transmission line during the downward lightning flash

The atmospheric space electrical field has nonlinear distribution characteristics during thunderstorm activity, which influences the ground surface electric corona of UHV transmission lines. In this paper, the corona discharge model of ground wire of ±1100 kV UHVDC transmission line is established considering the combined effect of ground lightning process and working voltage. With the combined action of thundercloud electrical field and DC voltage, the positive conductor suppresses the electric corona of the upper shied wire, and the negative conductor enhances the discharge of the upper shied wire. The corona current of the right shied wire is 54.7 μA/m larger than that of the left shied wire. When the down leader develops, the leader voltage, the line operating voltage and the thundercloud voltage work together, and the electric corona on the surface of the conductor and shied wire of the transmission line increases rapidly. The corona current increases 102 times on the left shied wire's surface and 103 times on the right shied wire's. Considering the environmental factors and the development of the downgoing leader at the same time, the degree of electric corona on the surface of the shied wire is weakened when the humidity in the space increases, but the overall value of the corona current is much higher than the thundercloud electrical field. When the wind speed increases, the degree of electric corona on the surface of the shied wire is aggravated. The corona current on the surface of the left shied wire is 37.13 μA/m, and the one of the right shied wire is 109.33 μA/m. The corona current value of ground surface increases with the increase of wind direction.

Abstract 3033: Registration And Segmentation Framework For 3d Instrument Visualization Relative To Preoperative Ct Imaging Via Spatially-tracked Ultrasound: A Phantom Study

Objectives: Surgical navigation guides surgery without radiation by mapping instrument locations onto preoperative CT (pCT). Adoption to vascular surgery remains novel. Feasibility of spatially-tracked ultrasound (US) for surgical registration and wire localization relative to pCT is demonstrated. Methods: pCT was taken (0.6mm) of a carotid artery phantom and a CT artery model (CTM) segmented. An US probe (Philips L17-5), was rigidly attached to an optical tracker and swept along the artery (1000 images). A navigation system (Medtronic StealthStation) acquired the tracker and 2D US image's positions via a spatial calibration (1.6mm accuracy). The artery in each image was segmented and tracking data combined to reconstruct a 3D US artery model (USM) (Fig. 1). The CTM and USM were registered via an iterative closest point algorithm. A Rosen wire (0.035in) was inserted into the artery. Acquiring an US sweep of the wire (500 images), it was segmented in each image via thresholding. Segmentations and tracking were combined into a 3D US wire-model (USWM). Its position was overlaid onto pCT via the USM-CTM registration. Another CT was acquired, registered via a fiducial point-based registration (0.86 mm accuracy), and the ground truth wire position segmented (Fig. 2). A tip-to-tip distance was measured between the USWM and CT wire positions. Results: CTM-to-USM registration error was 0.93 mm (RMSE) between artery point clouds. The tip-to-tip distance between CT and USWM wire models was 0.2 (longitudinal) and 1.4 (radial) mm. Conclusions: A vascular navigation framework capable of patient registration and highly accurate instrument localization is provided using tracked iUS.

The Effect of Twisted Wire Configuration on the Stability of External Fixator: A Biomechanical Study

The Ilizarov fixator is a type of external fixator that is used to treat patients who have suffered injuries from accidents, bone shortening, or nonunion of the bone. The principle behind the Ilizarov fixator is that thin wires (called Kirschner wires) are used to support the bones and connect them to framed rings. Before being fastened to the rings, the wires are tensioned and drilled through the bones. This study suggests using a new parallel wires configuration at the same level on the same ring and two revised versions, which are divergent and convergent models, and compare them with standard wires, 60 angle wires model. All models were designed using SolidWorks, a computer-aided design (CAD) software, and then analyzed in four conditions (axial compression, medial bending, posterior bending, and torsion) with Finite Element Analysis (FEA) using Ansys Workbench 2020 R2. Mechanical testing was conducted to validate the FEA results, A simple model consisting of a single ring, two K-wires, and polylactic acid (PLA) cylinders was utilized in a tensile test. It has been concluded from the results that the parallel model and its improvement have higher stiffness to axial compression, medial bending, and torsion, but a lower posterior bending stiffness, except the divergent model with 8-hole separation which has a relatively acceptable stiffness for posterior bending.

Landau–Zener–Stückelberg–Majorana-like dynamics induced by tunneling of spin qubit states in a multiband two-state magnetic quantum wire

We investigate the transfer between spin quantum bit (qubit) states and study the Landau–Zener–Stückelberg–Majorana (LZSM)-like dynamics of tunneling spin qubits in a multiband two-state magnetic quantum wire. Indeed, within the framework of an optical parabolic potential in a three-dimensional (3D) heterostructure quantum wire and under the influence of an external time-varying magnetic field, a model for a multiband two-state magnetic quantum wire is developed. Here, the external magnetic field is used to coherently manipulate and control spin qubit states. By driving the system through an avoided crossing, we consider the associated effective quantum two-level system (TLS) related to the spin qubit states in each band, driving by an external coherent magnetic field in which the related Hamiltonian is Hermitian, and which generally paves a way to LZSM interferometry. Thus, we establish the analytical expressions of the energy eigenvalues in each band and derive the analytical solution of the dynamical evolution of the tunneling probabilities of the associated TLS. Accordingly, nonadiabatic and adiabatic tunneling probabilities (survival and transition) are calculated for each band of the multiband TLS. In this respect, the nonadiabatic and adiabatic dynamical evolutions of the tunneling probabilities of spin qubit populations in the first four bands, with band quantum numbers n = 0, 1, 2 and 3 are analyzed. As a result, depending on the amplitude strength of the driven magnetic field and the magnitude of the driving frequency, we report two striking nonadiabatic and adiabatic scenarios in each band for both the diabatic and adiabatic states. In this context, driving the two states of each band of the multiband TLS related to the spin qubit states through an avoided level crossing can result in nontrivial and incoherent dynamics at certain phases, resulting to apparent inaccurate probabilities, especially in the case of strong driven magnetic field and high driving frequency.

Fatigue of Bridge Steel Wire: A Corrosion Pit Evolution Model under the Effects of Wind and Vehicles

To investigate the damage evolution behavior of corroded steel wires under the influence of alternating loads, a damage evolution model for steel wires based on the theory of continuous damage mechanics was established. The damage evolution process at corrosion pits was simulated by using the element birth and death technique in ANSYS 2020R2. Then, a certain cable-stayed bridge was chosen as the research subject, the stress–time data of the sling were computed using a traffic–bridge–wind simulation analysis model, and the influence of corrosion pit distribution on the mechanical properties and fatigue life of wires under an alternating load was discussed. The results show that, in comparison to single-pitted steel wires, double-pits distributed circumferentially across the cross-section of the steel wires lead to more severe stress concentration, accelerating the damage evolution process and significantly reducing the fatigue life of the steel wires. Conversely, the stress concentration caused by double pits distributed along the longitudinal direction of steel wire is similar to that caused by single pits, and it will be even weaker than that caused by single pits with the change in the relative distance of the double pits. Based on the calculation results of the damage evolution model of steel wire, it was found that the corrosion pit crack nucleation life of steel wire under alternating load accounts for nearly 80% of the fatigue life of steel wire, and different corrosion pit distribution modes will significantly affect the fatigue life of steel wire.

Prediction of Subsurface Microcrack Damage Depth Based on Surface Roughness in Diamond Wire Sawing of Monocrystalline Silicon.

In diamond wire saw cutting monocrystalline silicon (mono-Si), the material brittleness removal can cause microcrack damage in the subsurface of the as-sawn silicon wafer, which has a significant impact on the mechanical properties and subsequent processing steps of the wafers. In order to quickly and non-destructively obtain the subsurface microcrack damage depth (SSD) of as-sawn silicon wafers, this paper conducted research on the SSD prediction model for diamond wire saw cutting of mono-Si, and established the relationship between the SSD and the as-sawn surface roughness value (SR) by comprehensively considering the effect of tangential force and the influence of the elastic stress field and residual stress field below the abrasive on the propagation of median cracks. Furthermore, the theoretical relationship model between SR and SSD has been improved by adding a coefficient considering the influence of material ductile regime removal on SR values based on experiments sawing mono-Si along the (111) crystal plane, making the theoretical prediction value of SSD more accurate. The research results indicate that a decrease in wire speed and an increase in feed speed result in an increase in SR and SSD in silicon wafers. There is a non-linear increasing relationship between silicon wafer SSD and SR, with SSD = 21.179 Ra4/3. The larger the SR, the deeper the SSD, and the smaller the relative error of SSD between the theoretical predicted and experimental measurements. The research results provide a theoretical and experimental basis for predicting silicon wafer SSD in diamond wire sawing and optimizing the process.

Fast Analytical Loss Model for Litz Wire in Transformers With Arbitrary Winding Arrangements

Fast Analytical Loss Model for Litz Wire in Transformers With Arbitrary Winding Arrangements

A Hybrid Prediction Fault Location Model for Copper Wire Manufacturing Process

A Hybrid Prediction Fault Location Model for Copper Wire Manufacturing Process

Damage hysteresis dynamic model of tangled metal wire based on higher-order dry friction (HDF)

Tangled metal wire (TMW) is a kind of porous hyperplastic high damping material, which can realize the vibration isolation of key equipment. However, the unclear mapping relationship between internal microscopic damage and overall macroscopic performance made it difficult to construct a damage hysteresis dynamic model. This limits the application and development of TMW vibration isolation. In this paper, a strategy to analyze the dynamic damage evolution of TMW was proposed. Firstly, a cross-scale relationship between internal damage in TMW and macroscopic performance degradation was established. Furthermore, a damage hysteresis dynamic model was constructed by considering the high-order dry friction (HDF). The complex spatial spiral structure and preparation process parameters were described by using the HDF. Then, the damage factors of each component force were built and analyzed: The damage factor of HDF could be used to characterize the damage evolution of the metal wire inside TMW and the cross-scale correlation between microscopic damage and macro performance degradation, whereas the degree of hysteresis characteristics of TMW could be characterized by the damage factor of hysteretic coulomb damper. Finally, the damage hysteresis dynamic model was evaluated through residual analysis, and it has high prediction accuracy in more than 80 % of the cycles R2>0.7. This paper provided a new idea for the modeling of TMW life prediction.

Material mechanics properties and critical analyses of fish farm netting and trusses

Fish farms face the risk of aquaculture failure due to prolonged operation and the excessive loads caused by typhoons. Aging tests conducted for this study using salt spray, humid heat, and xenon lamps confirm that netting performance significantly declines compared to that of unused nets. The seawater-exposed portion of the netting in the dry–wet separation area is especially susceptible to damage. After three years of natural aging, the netting retains 48% of its original strength, and its elongation at break decreases from 90% to 32%. Under a standard load of 20 N, the equivalent wire model's maximum wear length is 205 m. The fishing net is prone to wear because of sliding friction with the truss. The net opening may fracture when loaded with 1000 N, with a maximum stress of 36.40 MPa at the corners. The netting's fatigue life decreases sharply when the vibration force exceeds 60% of its maximum strength. Moreover, risk analysis shows that fish farms with single-point mooring can successfully withstand a tension of 1256.72 kN during super-typhoons. In redesigned models, buoyancy tanks decrease current resistance, and trapezoidal fishing nets with an increasing slope along the truss column effectively reduce wear.

Experiment study on the mechanical properties and constitutive model of grade 1960 steel wires under and after elevated temperatures

To investigate the effects of different temperatures and cooling patterns on the surface characteristics, failure modes and mechanical properties of steel wires, a total of 52 steel wires of grade 1960 under and after elevated temperatures were tested. Then, the influence mechanism of temperatures on mechanical properties was further revealed with the help of SEM fracture scanning. Furthermore, the laws of reduction coefficient of mechanical properties of steel wires under and after elevated temperatures were proposed. Finally, the equation of high temperature stress-strain curve of steel wires was constructed. The results showed that the surface colors of steel wires gradually deepened with the increase of temperature, and a mass of zinc oxide particles appeared on the surface of steel wires at 500 °C, when the galvanized layer began shedding a lot. Meanwhile, the fracture shape of the specimens became obvious cup-cone, especially when the temperature exceeded 600 °C, the shape turned conical. In addition, the elastic modulus, yield strength and tensile strength of steel wires at 300 °C accounted for 85 %, 68 % and 74 % of the corresponding mechanical properties at room temperature, respectively. When the temperature exceeded 300 °C, the mechanical properties of steel wires would decrease significantly. For example, the ultimate strength of steel wire at 400 °C was only 53 % of that at room temperature. Nevertheless, the mechanical properties of steel wires after high temperature were basically unchanged before 300 °C. Similarly, the mechanical properties of steel wires gradually decreased after cooling by temperature action above 300 °C. For example, when the heating temperature was 600 °C, the ultimate strength was only 46 % of that at room temperature. Ultimately, comparing with the result of experimental and previous literature, the accuracy of the proposed formula for the reduction coefficient of high temperature mechanical properties and constitutive model of steel wire was verified. It is recommended to set the fire resistance temperature of steel wire inside the bridge cable at around 300 °C.

The Unconditionally Stable Associated Hermite FDTD Method With Dielectric Coating Thin Wires Model

The Unconditionally Stable Associated Hermite FDTD Method With Dielectric Coating Thin Wires Model

Effectiveness of a manual test at the beginning of dental school.

This study analysed whether the SAZAMED (Self-assessment for dentistry studies) manual test conducted as an exercise or examination in the first year of dental studies, and the official aptitude test for medical studies (EMS), can predict future performance of dental students. Students enrolled in the dental curriculum at the University of Basel between 2009/10 and 2019/20 were categorized: Group A conducted the SAZAMED in the third bachelor year (BA) and second master year (MA), group B practiced in the first and third BA and second MA and group C had to pass the test in the first BA with repetition in the third BA and second MA. SAZAMED comprised (i) wire bending, (ii) modelling sphere and cube, (iii) drawing mirror-inverted and (iv) indirect drawing over a mirror. Comparative variables were the EMS per cent rank and test scores in practical-clinical examinations in the third BA and the second MA. Data were available from 329 students over the 10-year period. Repeaters and dropouts had poorer performance in the first BA SAZAMED than students who did not (p < 0.001). Among the four SAZAMED exercises, mirror-inverted drawing was the strongest predictor of future student performance. The official aptitude test EMS correlated with the third BA certificate (p = 0.012), but failed to predict repeaters and dropouts. Since academic success was associated with significantly better scores on the first BA SAZAMED, it is considered a predictor and recommended in addition to the official EMS to identify students in need of intervention programmes or who should choose a different field of study.