Increase In Width Research Articles

Separated reactant mix width across diffusion-dominated and hydrodynamically dominated interface mix in inertial confinement fusion implosions

Diffusion-dominated mix in inertial confinement fusion (ICF) is characterized where the majority of the mix occurs in the immediate fuel-shell interface while hydrodynamic-dominated mix pulls shell material from farther away into the central fuel. A thin (150 nm) separated reactants ICF mix platform is highly sensitive to the amount of mix from the first micron of shell-fuel interface. This fine-spatial resolution platform has revealed that material mix in moderate convergence (CR∼12) ICF implosions is dominated by a diffusion mechanism. This technique has now been expanded across a set of OMEGA ICF implosions, observing an increase in mix width and mix amount for cooler, slower, and more compressive implosions. Hydrodynamic simulations require a buoyancy-drag mix model to capture the increasing mix width, suggesting a transition between these two mix mechanisms. Published by the American Physical Society 2024

Exploring the effect of walking patterns on pathway design in landscape architecture using gait analysis

This study investigates the impact of pathway design on human walking patterns using advanced gait analysis techniques to inform landscape architecture. By analyzing key gait parameters such as stride length, cadence, walking speed, step width, and foot placement angles, this research seeks to identify how various pathway features—such as surface material, slope, curvature, and width—influence walking behaviour. Data is collected through motion capture systems and wearable sensors from diverse participants, including individuals of different ages and physical abilities. Statistical methods, including Multivariate Analysis of Variance (MANOVA), are applied to determine significant differences in walking patterns across pathway types, while ML techniques, such as k-means clustering, classify participants based on their walking strategies. The results offer data-driven insights into how different pathway designs affect walking efficiency and comfort. For example, pathways with a slope of 10% reduced WS by 14% compared to flat pathways, while surfaces like gravel increased Foot Placement Angles by 18% compared to concrete, impacting stability. The study provides practical recommendations for creating pathways that support natural human movement, such as ensuring step width and stride length remain consistent across varied surface types by designing smooth transitions between different materials. The study emphasizes the importance of designing inclusive, accessible pathways that accommodate the needs of diverse user groups. For instance, individuals with mobility challenges exhibited a 12% increase in step width on sloped surfaces, suggesting that gentler inclines and smoother textures are essential for accessibility. The findings contribute to LA by offering evidence-based guidelines that optimize pathways’ functionality and user experience in outdoor environments. These guidelines include maintaining a pathway slope below 5% for universal accessibility and using surface materials like concrete or permeable pavers that balance durability and comfort, promoting sustainability and user-centred design.

Variation of six local poplar clones in growth and eco-physiological traits in two types of arid valleys

Abstract Six clones of native poplars were used in a field trial to investigate variations in survival, growth, and adaptation to arid-warm and arid-hot valleys. In the arid-hot valley, clone Y1-2 exhibited the highest survival rate and growth condition, surpassing other clones, while clones B7-4 and P3-6 demonstrated superior survival and growth performance in the arid-warm valley. Clone B7-4 displayed the highest soluble sugar content in leaves across both habitats. SOD and APX activities, along with MDA content in leaves, were higher in the arid-hot valley for all clones compared to the arid-warm valley. Long-term water use efficiency, as indicated by δ13C in leaves, was significantly higher for all clones in the arid-hot valley, particularly for H1-6, T3-2, and P3-6. Increases in upper epidermis thickness were observed in clones E1, B7-4, and P3-6, while Y1-2 exhibited a higher palisade parenchyma thickness (PT) in the arid-hot valley compared to the arid-warm valley. Vein densities were higher in leaves of clones E-1, B7-4, Y1-2, and P3-6 in both valleys compared to other clones, with B7-4 showing a significant increase in mean vein width in the arid-hot valley. In conclusion, the superior growth performance of clone B7-4 in the arid-warm valley may be attributed to its stronger osmotic adjustment and higher capacity to maintain water transportation through venation. The exceptional performance of clone Y1-2 in the arid-hot valley may be associated with its compact arrangement of PT, as well as its stronger capacity for hydraulic transport and antioxidant resistance in leaves.

Is Socket Flexion Alignment Associated With Changes in Gait Parameters in Individuals With an Above-knee Amputation and a Hip Flexion Contracture?

A hip flexion contracture (HFC) results in an inability to extend the hip by reducing the ROM of the affected hip. The condition affects one in four patients with above-knee amputations on the amputation side. While HFC in other disorders is known to decrease hip ROM and increase pelvic tilt during gait, its impact on the gait of patients with above-knee amputations remains unexplored. Typically, prosthetists design the socket with a flexion angle matching the HFC, potentially leading to compensations during the posterior stance phase of the gait cycle. To our knowledge, little is known about how or whether these compensations relate to the socket's flexion alignment. (1) Is the presence of HFC associated with modifications of spatiotemporal and kinematic parameters during gait in patients with an above-knee amputation? (2) Is there a correlation between the socket flexion angle and the spatiotemporal and kinematic parameters during gait in patients with an above-knee amputation with and without HFC? A comparative observational study was conducted between February 2022 and June 2023. Thirty-two participants with unilateral above-knee amputations who had undergone amputation at least 1 year prior and had a minimum of 1 month of experience with their current prostheses were eligible for consideration and included in the study. After the trial, 1 of 32 participants was excluded due to other impairments affecting gait, and 9% (3 of 32) were excluded because of pain or discomfort during data acquisition on their gait, leaving 88% (28 of 32) of participants included in the analysis. The median (IQR) age of participants in the HFC group (n = 13) was 50 years (26 to 56); 85% (11) were male and 15% (2) were female. The median (IQR) age of participants in the noHFC group (n = 15) was 41 years (32 to 56), and 100% were male. Time since amputation was similar between groups (HFC median 8 years [IQR 3 to 21], noHFC median 6 years [IQR 1 to 9], difference of medians 2; p = 0.31). Thirty-two percent (9 of 28) of patients were classified according to the Medicare Functional Classification Level system as K4 (exceeding basic ambulation skills) and 68% (19 of 28) were classified as K3 (ability to walk with variable cadence and traverse most environmental barriers). Clinical and prosthetic measurements were made, which comprised measurement of the HFC using a hand-held goniometer with the patient in the modified Thomas test position, the socket flexion alignment, and the difference (δ) between the HFC and socket flexion alignment. A gait analysis was performed with an optoelectronic system equipped with six infrared cameras and two force plates to analyze the time-distance and kinematic parameters of gait. To answer our first question, we quantitively compared the gait spatiotemporal and kinematic parameters between groups, and for the second question, we evaluated the correlations between the same parameters and prosthesis alignment for both groups. During gait, the HFC group exhibited reduced mean ± SD residual hip ROM in comparison with the noHFC group (35° ± 6° versus 44° ± 6°, mean difference -9° [95% CI -13° to -6°]; p < 0.001), increased pelvic tilt (11° ± 6° versus 7° ± 3°, mean difference 4° [95% CI 1° to 8°]; p = 0.02), increased pelvic rotation (12° ± 3° versus 9° ± 2°, mean difference 3° [95% CI 2° to 6°]; p < 0.001), and increased trunk rotation (15° ± 5° and 12° ± 2°, mean difference 3° [95% CI 0° to 6°]; p = 0.04). Greater δ correlated with decreased ROM in the contralateral hip (r = -0.71; p = 0.006), pelvis (r = -0.77; p = 0.002), and trunk (r = -0.58; p = 0.04) in the sagittal plane and with increased residual hip ROM (r = 0.62; p = 0.02). In terms of spatiotemporal gait parameters, in the HFC group, the δ correlated with an increase in contralateral step width (r = 0.58; p = 0.04) and a decrease in prosthetic step length (r = -0.65; p = 0.02). Our findings further suggest that physiotherapists should consider the pelvic and trunk compensations associated with HFC in their rehabilitation because of potential long-term effects, such as low back pain or osteoarthritis. In addition, the correlation between the socket flexion angle and the parameters involved may support prosthetists in their choices of prosthetic settings. For now, we cannot consider these compensations as an impaired gait syndrome, and future studies are needed to evaluate their impact on patients' quality of life. Level III, therapeutic study.

Distinguishing and Further Reinforcement for Nanocrystal XRD Peaks Caused by Instrument Broadening in Nanomixed Materials

X-ray diffraction (XRD) is one of the most essential techniques for characterizing various crystals. However, when nanocrystals are present, the diffraction peaks become significantly broadened and reduced in intensity, making phase and microstructure analysis challenging. To obtain more refined microstructural information from nanocrystals, various methods have been developed to enhance diffraction peaks, with step scanning being a commonly used approach. Additionally, increasing instrument broadening (IB) by adjusting slit sizes to enlarge the irradiation area is a convenient yet often overlooked method. In this study, the effects of IB on the diffraction peak intensities of nanocrystals and micron crystals in mixed materials were thoroughly investigated. The results show that the intensities of both nanocrystals and micron crystals increase as IB increases, a behavior similar to that observed when extending the testing time during step scanning. However, the rate of increase in peak heights for nanocrystals is higher than for micron crystals, while the rate of increase in peak width for nanocrystals is lower, which is a significant departure from the effects seen in step scanning. In other words, nanocrystal peaks become sharper and more distinct as IB increases. This phenomenon is explained by the different components of peak width for nanocrystals and micron crystals, based on Lorentz mathematical model analysis. Based on these findings, it is recommended to utilize larger IBs in combination with step scanning to further reinforce nanocrystal peaks in mixed materials.

Device to circuit level implementation of JL-NSFET for DC/analog/RF applications at sub-5nm technology node: design optimization and temperature analysis

Abstract This manuscript introduces, for the first time, a novel approach that incorporates a comprehensive analysis of sheet variations (1–5) and every individual sheet wise temperature variation, and as well as an investigation of various GS high-k gate dielectrics in Junction-less (JL) Nanosheet FET (JL-NSFET). The study starting from device level (Digital/Analog/Radio Frequency) to circuit (CMOS Inverter and ring oscillator) as a whole package is investigated through well calibrated TCAD simulation and the results portrayed. NSFETs are the ultimate choice for integrated circuits (ICs) at sub-5 nm technology node. The notion of this paper is to design and optimization of NSFET with GS high-k gate dielectrics (Al2O3, HfO2, ZrO2 and TiO2) Initially. The switching/analog and RF metric revels that HfO2 is superior in terms SS, switching applications and more compactable with CMOS process. Further, adding number of sheets and temperature variation has been done later. As number of sheets increases, the effective channel width increases, electric field distribution takes place evenly and enhanced gate control owing to improved I O N , I O N / I O F F r a t i o , SS and DIBL. However, increasing the number of vertical channel layers (sheets) more than 2 results into diminished analog/RF performance of JL-NSFET owing to increased parasitic capacitances. Further, the impact of temperature variations (250 K to 450 K) studied for different sheet variations (1 to 5) and noticed that analog/RF such as gm, gds, fT, TFP and GTFP are enhanced by 40.82%, 28.76%, 40.69%, 64.62% and 70.59%, respectively at lower temperature (250 K) when compared to high temperature (450 K). These enhancements make the device is ideal for applications in cryogenic computing systems, satellites, deep space probes, and other aerospace technologies. Furthermore, as the circuit level implementation CMOS inverter and 5-stage ring oscillator (RO) are examined for different sheets and observed as sheets increase delay and EDP increases. For a CMOS inverter the NMH (0.295 V) and NML (0.280 V) are better at 2 sheets with a highest gain of 9.38 V/V. Hence, it is advised to use two or three sheets-based JL-NSFETs for high-performance and lower-power analog/RF applications.

USP20 deletion promotes eccentric cardiac remodeling in response to pressure overload and increases mortality.

Left ventricular hypertrophy (LVH) caused by chronic pressure overload with subsequent pathological remodeling is a major cardiovascular risk factor for heart failure and mortality. The role of deubiquitinases in LVH has not been well characterized. To define whether the deubiquitinase ubiquitin-specific peptidase 20 (USP20) regulates LVH, we subjected USP20 knockout (KO) and cognate wild-type (WT) mice to chronic pressure overload by transverse aortic constriction (TAC) and measured changes in cardiac function by serial echocardiography followed by histological and biochemical evaluations. USP20-KO mice showed severe deterioration of systolic function within 4 wk of TAC compared with WT cohorts. Both USP20-KO TAC and WT-TAC cohorts presented cardiac hypertrophy following pressure overload. However, USP20-KO-TAC mice showed an increase in cardiomyocyte length and developed maladaptive eccentric hypertrophy, a phenotype generally observed with volume overload states and decompensated heart failure. In contrast, WT-TAC mice displayed an increase in cardiomyocyte width, producing concentric remodeling that is characteristic of pressure overload. In addition, cardiomyocyte apoptosis, interstitial fibrosis, and mouse mortality were augmented in USP20-KO-TAC compared with WT-TAC mice. Quantitative mass spectrometry of LV tissue revealed that the expression of sarcomeric myosin heavy chain 7 (MYH7), a fetal gene normally upregulated during cardiac remodeling, was significantly reduced in USP20-KO after TAC. Mechanistically, we identified increased degradative lysine-48 polyubiquitination of MYH7 in USP20-KO hearts, indicating that USP20-mediated deubiquitination likely prevents protein degradation of MYH7 during pressure overload. Our findings suggest that USP20-dependent signaling pathways regulate the layering pattern of sarcomeres to suppress maladaptive remodeling during chronic pressure overload and prevent cardiac failure.NEW & NOTEWORTHY We identify ubiquitin-specific peptidase 20 (USP20) as an important enzyme that is required for cardiac homeostasis and function, particularly during myocardial pressure overload. USP20 regulates protein stability of cardiac MYH7, an essential molecular motor protein expressed in sarcomeres; loss-of-function mutations of MYH7 are associated with human hypertrophic cardiomyopathy, cardiac failure, and sudden death. Enhancing USP20 activity could be a potential therapeutic approach to prevent the development of maladaptive state of eccentric hypertrophy and heart failure.

Research on the fabrication of high-quality patterned diamond using femtosecond laser

Diamond, known for its exceptional thermal, electrical, and mechanical properties, is widely used in precision machining tools, MEMS, and electronic devices. However, because of its extreme hardness and chemical inertness, diamond machining is highly challenging. Femtosecond laser technology, with its high instantaneous energy and minimal heat-affected zone, has emerged as an effective method for the precision machining of diamond. This study explores the application of 1026 nm and 513 nm femtosecond lasers in diamond grooving. The experimental results indicate that with increasing laser energy density, both groove width and depth increase, accompanied by a rise in amorphous carbon and graphite contents, resulting in increased tensile stress and decreased crystallinity in the machined region. Notably, the 513 nm laser demonstrates higher precision, achieving narrower grooves suitable for fine machining of diamond. Molecular dynamics simulations and experimental data reveal that the formation of amorphous carbon and graphite phases is the primary mechanism for deep ablation, and no significant anisotropy is observed during the process, allowing for the uniform fabrication of micro-nanostructures. TEM analysis confirms the presence of amorphous carbon and nanocrystalline diamond at the groove bottom, indicating phase transformation and also the formation of nanoscale diamond particles in regions of concentrated femtosecond laser energy. This study provides experimental and theoretical support for the high-quality fabrication of micro-nanostructures on diamond, with significant implications for its advanced applications.

Propagation of Hydraulic Fractures and Natural Fractures: The Bypassing Behavior in 3D Space

Summary The interaction between natural fractures (NFs) and hydraulic fractures (HFs) in 3D space poses significant challenges to numerical simulation. The interaction behaviors between HFs and NFs in 3D space include crossing, offset, stopping, and bypassing. Many existing numerical simulators are 2D, which inherently limits their ability to account for the vertical growth of fractures. Consequently, they are unable to model the bypassing behavior effectively. In this paper, a mathematical model for the propagation of HFs and NFs in a naturally fractured reservoir is established. The displacement discontinuity method (DDM) is used to solve the rock deformation, while the finite difference method (FDM) is utilized to solve the fluid flow within fractures. The undirected graph structure is used to represent the complex fracture network, and a dynamic adjustment of grid connectivity method is implemented to describe the process by which HFs bypass NFs. By integrating with graphics processing unit (GPU) computing, an efficient 3D simulator for HFs and NFs propagation is developed. The accuracy is verified against analytical solutions and reference solutions. Subsequently, a series of numerical studies on the bypassing behavior are conducted. The primary findings are as follows: (1) The simulator can accurately capture the interactions between HFs and NFs in 3D space, including crossing, arresting, and bypassing behaviors. (2) The bypassing behavior is characterized by three distinct processes—intersection, height growth of HF, and bypassing. (3) During the intersection stage, both the injection pressure and maximum NF width increase. During the height growth stage, the pressure is relatively stable, while the maximum NF width continues to increase. These two stages together result in the “storage” phenomenon. Once the bypassing behavior occurs, both the pressure and the maximum NF width decrease sharply, leading to a “release” phenomenon. Additionally, the “storage” and “release” phenomena may impact proppant transport. (4) Given the presence of bypassing behavior, it is essential to consider the NFs in 3D fracture simulators. The simulator and its findings can provide valuable insights for field design.

Research on the Optimization of Oscillation for the Joint Quality of Laser Welded Joints in Automobile Seat Frames

The increasing adoption of high-strength steel in automotive manufacturing has made laser welding a preferred technique due to its ability to reduce thermal deformation and facilitate single-sided welding. Despite these advantages, challenges persist, particularly in achieving precise welds at the edges of seat frame assemblies. This study explores the application of laser weaving techniques to improve joint strength and penetration depth. The critical variables evaluated include defocusing distance and weaving parameters, which were assessed for their impact on penetration depth, effective joint width, and edge weld quality in a three-sheet stack of dual-phase (DP) steel. Results indicate that increasing the defocusing distance from 5 mm to 20 mm at a fixed oscillation frequency of 20 Hz leads to a corresponding increase in surface bead width. A significant correlation was found between the effective joint width and maximum tensile shear strength, with the highest strength of 34.6 kN observed at an 8 mm defocusing distance. Additionally, the use of oscillation in the welding process improved tensile shear strength by approximately 9 kN compared to line welding without oscillation. Oscillation also enhanced microstructural properties, demonstrating that optimal welding conditions can be achieved even with off-position welding. These improvements are attributed to minimized heat-affected zone (HAZ) effects, which contributed to increased joint strength and hardness.

Ground Behavior of Parallel Tunnels in Response to Variations in Groundwater Flow

With the steady expansion of urban development, the importance of tunnel design and construction has increased, particularly with respect to changes in the groundwater level. Excavation without considering groundwater variations can destabilize tunnels; and this problem has been exacerbated by recent climate change-induced groundwater level fluctuations. This study evaluates the impact of various factors, such as filler width, lateral earth pressure coefficient, and groundwater flow, on tunnels by analyzing the ground behavior around parallel tunnels in Korea. The findings reveal that an increase in filler width reduces settlement and displacement, while the coefficient of lateral earth pressure affects convergence displacement to a higher degree than other settlements. Moreover, steady flow conditions are observed to wield a more pronounced impact on ground behavior than unsteady ones. These findings emphasize the importance of thoroughly evaluating groundwater flow characteristics during tunnel excavation and provide essential data for the future design and construction of parallel tunnels.

Morphometric characteristics of glacial cirques and former glaciers in the Geyik Mountains, Western Taurus, Türkiye

Using the Glacier reconstruction (GlaRe) toolbox, reconstructions of former glaciers in the Geyik Mountains, part of the Taurus Mountain system in southern Türkiye, show that an area of 132.5 km2 was glaciated in the last major glaciation, which left clear terminal and hummocky moraines. Glaciers were 1.4 to 12 km long and those from 49 cirques merged to form a broad 75 km2 piedmont glacier in the Namaras Valley, up to 400 m thick. A thorough analysis of morphometry of the 98 Geyik cirques, using the revised Automated Cirque Metric Extraction version 2 (ACME2) toolbox, shows that they are relatively small, with limited widths: the median length/width ratio of 1.29 is unusually high. With size, length and width increase faster than depth, demonstrating strong static allometry. Maximum slope averages 59°, minimum 3.3° and axial 25°. A combination of low hypsometric integral, high axial profile closure and high axial height-length integral is proposed as a measure of cirque development.The main summits are on sharp ridges on cirque crests, showing that they have been lowered by glacial erosion (by cirque development). Glaciation was strongly asymmetric, with cirque vector mean aspect between northeast and north-northeast. This shows the dominance of solar radiation effects, with some modification from westerly winds. Glacier palaeo- Equilibrium Line Altitudes (pELAs) rise northeastwards and cirque floor minimum altitudes (CFAs) rise toward east-northeast, both showing the importance of moist air from the Mediterranean, 38–55 km to the southwest. pELA averages 2208 m above sea level (a.s.l.) (2277 m area-weighted); CFA averages 2234 m. CFA varies mainly with summit altitudes; where related palaeoglaciers are short CFA is somewhat below pELA, but for longer ones it is above. The most likely palaeoclimate to form these glaciers involves a precipitation increase of 53–72 % with a temperature fall of 8 °C compared with present-day. The cirques formed under similar or less severe conditions.

Evaluation of the effects of cementless total hip replacement on femoral length in skeletally immature dogs.

To describe percentage length changes in the femur after total hip replacement (THR) performed before skeletal maturity. Retrospective study. Twenty-four dogs younger than 8.5 months which underwent unilateral THR and had radiographic follow up. Preoperative and follow-up radiographs were reviewed. Radiographic measurements included the length of the greater trochanter, femoral diaphysis and distal epiphysis, width of the femur 10 mm distal to the distal aspect of the greater trochanter, width of the femur at 50%, and femoral condylar offset. Percentage changes in length over time were compared among operated and contralateral femurs used as controls. Measurements were collected in triplicate in 10 dogs to evaluate consistency. All repeated measurements had excellent consistency. The percentage increase in length of the greater trochanter was smaller in operated femurs than controls (mean difference: -11.5%, p = .017), but no differences were observed for the femoral diaphysis and distal epiphysis (-1.0%, p = .595), or the femur overall (-2.3%, p = .232). The percentage increase in femoral cortical width was greater in operated femurs than controls, both 10 mm distal to the greater trochanter (4.6% difference, p = .037) and at 50% length (8.5% difference, p = .030). In growing dogs, cementless THR decreased trochanteric growth by approximately 10% but did not change diaphyseal growth and femoral growth. Cementless THR performed in skeletally immature dogs with severe hip problems did not impact femoral length in a clinically relevant fashion.

Use of heterosis and transgression events to optimize sizes of leaves in variety group Burley tobacco

The manifestations of heterosis and transgression regarding the length and width of the leaves in ten hybrid combinations of Burley tobacco аre investigated. The results of the study show that in almost all variants and in both indicators, the values of the hypothetical heterosis exceed those of the real one. According to length of leaves heterosis with economic significance is observed only in one of the investigated hybrid combinations. Transgressive manifestations for this indicator are even less pronounced and are not significant in any of the studied options. In contrast to length of leaves the manifestations of heterosis are of economic importance in six of the ten crosses studied and could be successfully used to increase of width of leaves. Transgressive events in width of leaves are less pronounced than heterosis, but much more pronounced than those in the length. Direction of crossing affects the heterosis manifestations only of the length of the leaves but not those concerning their width. In terms to width of leaves, the manifestations of heterosis and transgression are related. Of all the studied variants, the one with the highest selection value regarding sizes of leaves is Hybrid 1555.

Comparison of aging of nonextraction treated and normal untreated occlusions: 40-year follow up

The objective of this study was to compare the aging changes of the dental arches in patients treated without extractions and untreated normal occlusion subjects after a four-decade follow-up. This retrospective study evaluated two groups: The Treated Group (Group T) comprised 16 patients (6 male; 10 female) presenting with Class I or Class II malocclusions treated orthodontically without extractions. Dental models were evaluated 3 stages: T1 (pretreatment, 13.20 years), T2 (posttreatment, 15.07 years) and T3 (long-term posttreatment, 50.32 years). The Untreated Group (Group UT) consisted of 22 untreated normal occlusion individuals. The dental casts were evaluated at the ages of 13.32 (T1), 17.82 (T2) and 60.95 years (T3). The dental casts were digitized and the irregularity index, intercanine, interpremolar and intermolar widths, overjet and overbite, arch length and perimeter were measured. Intergroup comparisons were performed with independent t tests (P < 0.05). From T1 to T2, the treated group showed maxillary and mandibular crowding and overjet decrease and a maxillary interpremolar and intermolar width increase compared to the untreated group. From T2 to T3, a greater maxillary and mandibular crowding increase and a greater arch length decrease were observed in the treated group compared to the normal occlusion subjects. Overbite increased in the treated group and decreased in the untreated group. The maturational changes of treated patients were different from untreated normal occlusion subjects. Relapse might have contributed for the greater changes observed in incisor crowding and arch length observed in orthodontically treated patients. The aging changes of untreated normal occlusions and nonextraction treated patients, after a four-decade follow-up, proved to be different, indicating that relapse of orthodontic treatment played a role in aging changes of treated patients.

Development of microflow ultra high performance liquid chromatography-mass spectrometry metabolomic assays for analysis of mammalian biofluids

Introduction and objectivesThe application of untargeted metabolomics assays using ultra high performance liquid chromatography-mass spectrometry (UHPLC-MS) to study metabolism in biological systems including humans is rapidly increasing. In some of these studies there is a requirement to collect and analyse low sample volumes of biofluids (e.g. tear fluid) or low cell and tissue mass samples (e.g. tissue needle biopsies). The application of microflow, capillary or nano liquid chromatography (≤ 1.0 mm column internal diameter (i.d.)) theoretically should accomplish a higher assay sensitivity compared to analytical liquid chromatography (2.1–5.0 mm column internal diameter). To date, there has been limited research into microflow UHPLC-MS assays that can be applied to study samples of low volume or mass.MethodsThis paper presents three complementary UHPLC-MS assays (aqueous C18 reversed-phase, lipidomics C18 reversed-phase and Hydrophilic Interaction Liquid Chromatography (HILIC)) applying 1.0 mm internal diameter columns for untargeted metabolomics. Human plasma and urine samples were applied for the method development, with porcine plasma, urine and tear fluid used for method assessment. Data were collected and compared for columns of the same length, stationary phase and stationary phase particle size but with two different column internal diameters (2.1 mm and 1.0 mm).Results and conclusionsAll three assays showed an increase in peak areas and peak widths when applying the 1.0 mm i.d. assays. HILIC assays provide an advantage at lower sample dilutions whereas for reversed phase (RP) assays there was no benefit added. This can be seen in the validation study where a much higher number of compounds were detected in the HILIC assay. RP assays were still appropriate for small volume samples with hundreds of compounds being detected. In summary, the 1.0 mm i.d. column assays are applicable for small volume samples where dilution is required during sample preparation.

Excited ion-scale turbulence by a magnetic island in fusion plasmas

The characteristics of ion-scale turbulence in the presence of a magnetic island are numerically investigated using a gyrokinetic model in fusion plasma. We observe that in the absence of the usual ion temperature gradient (ITG) drive gradient, a magnetic island and its flatten effect could drive ITG instability. The magnetic island (MI) not only drives high-n modes of ITG instability but also induces low-n modes of vortex flow. Moreover, as the magnetic island width increases, the width of the vortex flow also increases. This implies that wider islands may more easily induce vortex flows. The study further indicates that the saturated amplitude and transport level of MI-induced ITG turbulence vary with different magnetic island widths. In general, larger magnetic islands enhance both particle and heat transport. When the magnetic island width reaches to 21ρi, the turbulence-driven transport becomes the same level with the cases that ITG is driven by pressure gradients. Our findings indicate the presence of intricate nonlinear effects in the modulation of plasma turbulence by MIs. These effects are of significant importance for comprehending the phenomenon of nonlinear coupling in forthcoming tokamaks such as ITER.

Experimental, Numerical, and Analytical Investigation of the Reinforced Concrete Hidden and Wide Beams

AbstractThis research presents an experimental, analytical, and numerical study to predict the flexural behavior of reinforced concrete hidden and wide beams embedded in slabs. The experimentally studied parameters of testing eight specimens include beam depth, beam width, and beam eccentricity from the column. The obtained test results were compared to the predictions of finite element analysis using the ANSYS program. A numerical parametric study was conducted by the ANSYS program to explore other parameters affecting the ultimate flexural strength of beams. The studied parameters encompass concrete compressive strength, steel reinforcement strength, bottom reinforcement ratio, top-to-bottom reinforcement ratio, and web reinforcement ratio. The results revealed that an increase in beam depth led to higher ultimate load and secant stiffness, along with a decrease in deflection. The increase in beam width significantly affected beam depth, resulting in increased ultimate load and secant stiffness and a slight decrease in deflection. The increase in beam eccentricity from the column resulted in a decrease in ultimate load and secant stiffness while increasing the deflection. Comparisons between experimental and numerical results were made against calculations based on the ECP 203-2017 and ACI 318-19 codes, and the comparison yielded satisfactory results.

Numerical Simulation of Mechanical Properties of Deep Gray Sandstone with Holes and Radial Cracks

In order to study the effects of prefabricated pore-fracture on the mechanical properties, crack extension and energy evolution of rocks under uniaxial compression, the effects of rock samples containing pore-fracture deep grey sandstone on the mechanical properties, crack extension and energy evolution of rocks were analysed in detail through the indoor experimental inverse performance of the fine-scale mechanical parameters of the PFC3D model. The results show that the mechanical parameters of deep grey sandstone samples with pore fissures are significantly lower than those of intact samples, and the decrease is closely related to the diameter of the pore as well as the length and width of the fissure, with the increase of the diameter of the pore, the peak strength and the peak strain of deep grey sandstone with single pore are in the trend of attenuation, and the mechanical parameters of deep grey sandstone samples with pore fissures of different lengths and widths are in the trend of attenuation with the increase of fissure widths and lengths of different layers. The mechanical parameters of deep grey sandstone samples with different lengths and widths of fissures show a trend of attenuation with the increase of fissure width and length; based on the analysis of microscopic crack characteristics during loading of deep grey sandstone with pore fissures, it is concluded that the cracks produced by deep grey sandstone samples with pore fissures are mainly distributed at the two ends of the samples, and the middle area has fewer cracks and the number of the cracks produced shows a trend of attenuation with the increase in the diameter of the pore as well as the length and width of the fissure; Based on the energy evolution mechanism, it is concluded that as the pore size of the rock sample increases, the strain node at which the dissipated energy begins to appear becomes progressively earlier, the energy storage capacity of the rock appears to be drastically reduced, and the internal damage becomes more and more severe.

New Comprehensive Stability and Sensitivity Analysis on Graphene Nanoribbon Interconnects Parameters

Based on the transmission line modeling for multilayer graphene nanoribbon (MGNR) interconnects, system stability was studied on intrinsic parameters. In addition to width,length and height variation, dielectric constant, permeability and Fermi velocity path change in multilayer graphene nanoribbon (MGNR) interconnects are analyzed. In thispaper, the obtained results show with increasing dielectric constant and decreasing permeability, Fermi velocity system becomes more stable. Nyquist diagram and stepresponse method results confirm these and are matched with physical parameter variation like resistance, capacitance and inductance in the following sensitivity analysis results where it shows with increasing width and length, sensitivity will decrease and increase respectively. Impulse response diagram results show with increasing 50% width, sensitivity will be zero but with increasing 50% length, amplitude will decrease and the time of setting will increase. On the other hand, from the step response of the transfer function, both width and length increase cause more stability for a system but the width parameter will be a better choice for manipulating the dimension of MGNR to reach a stable system.