Head Width Research Articles

Description of a new species of the Asian newt genus Tylototriton (Amphibia, Urodela, Salamandridae) from Hunan Province, China

The newt genus Tylototriton is widely distributed in east, southeast, and south Asia. Previous studies have shown that basic surveys of this genus are far from comprehensive, and unknown species still exist within the group. In this study, we described a new species of this genus, Tylototriton gaowangjienensissp. nov., from Gaowangjie National Nature Reserve in Hunan Province, China, based on evidence from molecular identification and morphological comparisons. Additionally, we conducted phylogenetic analysis of the genus to elucidate the taxonomic status of the new species. Based on combined mitochondrial 16S rRNA and ND2 gene sequences, the phylogenetic tree supported the new species as a member of the T. wenxianensis species subclade in the subgenus Yaotriton. It can be distinguished from its congeners by the combination of the following characteristics: (1) medium-sized body; (2) finger tips extending beyond the snout while forelimbs stretched forward; (3) tips of forelimbs and hindlimbs reaching and overlapping when folded towards the body; (4) snout edge round; (5) absence of small papillae in the male cloacal fissure; (6) dorsal ridges narrow, with width smaller than the eye diameter; (7) head length (HDL) greater than head width (HDW) (HDL/HDW = 1.04~1.22); (8) orange markings absence on the parotoid; (9) nodule-like warts on body sides continuous; (10) vomerine teeth not connected at the tip, extending to the occipital bone at the posterior end.

The Impact of Eucalyptus and Pine Plantations on the Taxonomic and Functional Diversity of Dung Beetles (Coleoptera: Scarabaeidae) in the Southern Region of Ecuador.

This study sheds light on the complex relationship between land use, biodiversity, and the functional traits of dung beetles in Ecuador. The results indicate that the richness and abundance of dung beetles vary across different land uses and regions, with forests generally having a positive impact, while eucalyptus and pine plantations have a negative effect in certain areas. Specific indicator species, such as Homocopris buckleyi for forest areas and Onthophagus curvicornis for eucalyptus plantations, were identified. This study also found that functional diversity analysis, based on morphological traits, revealed that certain traits, such as biomass, pronotum width, head width, and elytra length, were significant contributors to differences in dung beetle communities across various land uses and regions. This study highlights the potential conservation value of certain modified habitats and emphasizes the importance of considering both taxonomic and functional diversity when assessing the impact of land use on the ecosystem services provided by dung beetles. It underscores the potential value of plantations as refuges for dung beetle communities and the need for long-term assessments to better understand biodiversity changes over time.

Exogenously Applied Gibberellic Acid Alters Cannabinoid Profile in Cannabis sativa L.

Cannabis sativa (C. sativa L.) has garnered significant attention worldwide due to its widespread use as a pharmaceutical agent. With the increasing clinical application of C. sativa and cannabinoid therapeutics, there is strong interest in the development of superior plant varieties and optimisation of growth conditions to enhance secondary metabolite yield. Our RNA sequencing analysis revealed differential expression of hormone-related transcripts in developing C. sativa trichomes, suggesting the involvement of hormone signalling pathways in cannabinoid production. Leveraging the potency of exogenous hormones on plants, this study sought to determine if the application of cytokinin (CK), gibberellic acid (GA) and jasmonic acid (JA) modified trichome morphology and the cannabinoid profile over an 8-week period following the induction of flowering. Exogenous hormone application led to alterations in trichome morphology, with each treatment significantly reducing trichome head width by the final week of assessment. Interestingly, GA application also resulted in a significant reduction in the concentration of Δ-9-tetrahydrocannabinol (THC), Δ-9-tetrahydrocannabinolic acid (THCA), cannabidiol (CBD) and cannabidiolic acid (CBDA) by week 8 post floral induction, however, JA and CK treatment did not consistently modulate the accumulation of these cannabinoids. The minor cannabinoids, cannabidivaranic acid (CBDVA), cannabicyclolic acid (CBLA), cannabicyclol (CBL), cannabichromene (CBC), cannabigerolic acid (CBGA) and cannabigerol (CBG), were also affected by hormone treatments, with varying degrees of accumulation observed. These findings underscore the intricate interplay between phytohormones and secondary metabolite biosynthesis in C. sativa. Our study highlights the potential of hormone modulation as a strategy to enhance cannabinoid yield and offers some insights into the regulatory mechanisms governing cannabinoid biosynthesis in C. sativa trichomes.

Analysis of variable speed operating range of centrifugal pump with large flow and wide head variation

Abstract The advantages of variable speed centrifugal pump include its broad operating range, wide operating efficiency zone, high operational stability, and regulative characteristics of input power. When pump station has characteristics such as large flow rate changes, large pump head changes, the conventional fixed speed centrifugal pump cannot meet requirements of safe and stable operation under characteristic pump conditions. In order to ensure the safe and stable operation of the pump station within the operation range, the variable speed operation strategy of centrifugal pumps is adopted to enhance its wide amplitude adjustment capability and efficient operation. This paper uses an 8MW centrifugal pump with wide head range in China to analyze the factors that influence the operating range of pump unit in detail. The results indicate that the variable speed pump unit’s safe and effective operating range is determined by the cavitation margin, hump margin, speed range, and pump maximum input power. The hydraulic design can improve the hump safety margin and cavitation characteristics of the operating zone, and then expand the operating range of the pump unit. Meanwhile, increasing the static suction head, reducing the hump margin, controlling pump head amplitude, and appropriately increasing the maximum input power limit are the best ways to extend centrifugal pump’s operating range and improve its adjustable capability. The results can provide reference for parameter selection and hydraulic design of large variable centrifugal pump in the future.

Adaptive potential in the face of a transmissible cancer in Tasmanian devils.

Emerging infectious diseases (EIDs) not only cause catastrophic declines in wildlife populations but also generate selective pressures that may result in rapid evolutionary responses. One such EID is devil facial tumour disease (DFTD) in the Tasmanian devil. DFTD is almost always fatal and has reduced the average lifespan of individuals by around 2 years, likely causing strong selection for traits that reduce susceptibility to the disease, but population decline has also left Tasmanian devils vulnerable to inbreeding depression. We analysed 22 years of data from an ongoing study of a population of Tasmanian devils on Freycinet Peninsula, Tasmania, to (1) identify whether DFTD may be causing selection on body size, by estimating phenotypic and genetic correlations between DFTD and size traits, (2) estimate the additive genetic variance of susceptibility to DFTD, and (3) investigate whether size traits or susceptibility to DFTD were under inbreeding depression. We found a positive phenotypic relationship between head width and susceptibility to DFTD, but this was not underpinned by a genetic correlation. Conversely, we found a negative phenotypic relationship between body weight and susceptibility to DFTD, and there was evidence for a negative genetic correlation between susceptibility to DFTD and body weight. There was additive genetic variance in susceptibility to DFTD, head width and body weight, but there was no evidence for inbreeding depression in any of these traits. These results suggest that Tasmanian devils have the potential to respond adaptively to DFTD, although the realised evolutionary response will critically further depend on the evolution of DFTD itself.

Craniofacial Measurements and Indices Trends in Latvian Children Aged 1-15.

This study aimed to assess the trends in craniofacial measurements and indices in Latvian children aged 1-15. The anthropometrical measurements (head circumference, length, width, facial length, and width) were conducted on 375 children according to the guidelines by R. Martin, K. Saller, and J. Prīmanis at the Anthropology laboratory at the Institute of Anatomy and Anthropology, Rīga Stradiņš University. The cephalic index (CI) and the facial or prosopic index (PI) were calculated, allowing for a detailed examination of cranial and facial proportions. The data were analyzed using descriptive and inferential statistics, including the Pearson Chi-square test and the Spearman correlation coefficient. The findings revealed a consistent increase in head circumference with age, with boys generally having slightly larger heads than girls. The boys and girls exhibited growth in head length and width, particularly noticeable between 1 and 2 years of age. Facial length and width increased with age, with boys typically having longer facial lengths and broader faces than girls. The most common cephalic index category is mesocephaly, which accounts for 52.85% of the population, followed by dolichocephaly at 32.94%. Brachycephaly and hyperbrachycephaly are less prevalent, representing 11.36% and 2.86% of the population. Regarding the facial index categories, hypereuryprosopic is the most prevalent, representing 45.54% of the population, closely followed by euryprosopic at 43.74%. Mesoprosopic is significantly less common, representing only 9.95%. The least common categories are leptoprosopic and hyperleptoprosopic, with prevalences of 0.64% and 0.12%, respectively. The indices analysis showed variations across age groups, with dolichocephaly being more common at younger ages and decreasing over time. Brachycephaly and hyperbrachycephaly remained relatively stable or decreased slightly with age, while mesocephaly displayed less variation. The relationship between the FI and CI in younger age groups was typically weak to moderate and inverse, with a significance level of p < 0.001 or p < 0.01. However, no meaningful correlation was observed in older children aged 14-15. This study provides valuable insights into the craniofacial development of Latvian children, highlighting the measurements, cranial and facial types, and their variations across age groups.

Triphenyl Phosphate Alters Methyltransferase Expression and Induces Genome-Wide Aberrant DNA Methylation in Zebrafish Larvae.

Emerging environmental contaminants, organophosphate flame retardants (OPFRs), pose significant threats to ecosystems and human health. Despite numerous studies reporting the toxic effects of OPFRs, research on their epigenetic alterations remains limited. In this study, we investigated the effects of exposure to 2-ethylhexyl diphenyl phosphate (EHDPP), tricresyl phosphate (TMPP), and triphenyl phosphate (TPHP) on DNA methylation patterns during zebrafish embryonic development. We assessed general toxicity and morphological changes, measured global DNA methylation and hydroxymethylation levels, and evaluated DNA methyltransferase (DNMT) enzyme activity, as well as mRNA expression of DNMTs and ten-eleven translocation (TET) methylcytosine dioxygenase genes. Additionally, we analyzed genome-wide methylation patterns in zebrafish larvae using reduced-representation bisulfite sequencing. Our morphological assessment revealed no general toxicity, but a statistically significant yet subtle decrease in body length following exposure to TMPP and EHDPP, along with a reduction in head height after TPHP exposure, was observed. Eye diameter and head width were unaffected by any of the OPFRs. There were no significant changes in global DNA methylation levels in any exposure group, and TMPP showed no clear effect on DNMT expression. However, EHDPP significantly decreased only DNMT1 expression, while TPHP exposure reduced the expression of several DNMT orthologues and TETs in zebrafish larvae, leading to genome-wide aberrant DNA methylation. Differential methylation occurred primarily in introns (43%) and intergenic regions (37%), with 9% and 10% occurring in exons and promoter regions, respectively. Pathway enrichment analysis of differentially methylated region-associated genes indicated that TPHP exposure enhanced several biological and molecular functions corresponding to metabolism and neurological development. KEGG enrichment analysis further revealed TPHP-mediated potential effects on several signaling pathways including TGFβ, cytokine, and insulin signaling. This study identifies specific changes in DNA methylation in zebrafish larvae after TPHP exposure and brings novel insights into the epigenetic mode of action of TPHP.

Study of Relationships among head, neck and ear measurements in young lambs

The present research work was conducted in order to explore association among various head, neck and ear measurements of local sheep found in Southern Punjab, Pakistan. Data on 97 lambs were recorded including identity of the animal where lambs have ages in the range of 1-6 months. Data on both sexes (males and females) were recorded. The body measurements included Head length, Head width, Ear length, Ear width, Neck length and Neck width. After collecting, data were edited and tested for normality. Data were analyzed to determine the association among them using Pearson’s correlation coefficient. From this study we can explain relationships among various body measurements and predict them from other measurements.

Application of modified grafted tubularized incised plate urethroplasty in hypospadias

To investigate the clinical feasibility and effectiveness of the modified grafted tubularized incised plate urethroplasty (G-TIP), namely "glans G-TIP (GG-TIP) ", in treatment of hypospadias. A clinical data of 137 children with hypospadias qualified by the selection criteria between January 2021 and June 2023 was retrospectively analyzed. Among them, 75 children were treated with GG-TIP (GG-TIP group) and 62 with G-TIP (G-TIP group). There was no significant difference ( P>0.05) between the two groups in terms of age, hypospadias type, penile length, penile head width, penile head height, penile curvature, meatus-apex distance, urethral plate width, and distance from the distal endpoint of navicular groove to the dorsal or ventral midline point of the glans corona, and the difference between the two. The operation time, reconstructed urethral length, distance from meatus to ventral glans corona, postoperative complications, maximum urinary flow rate at 2 weeks after operation, and the hypospadias objective scoring evaluation (HOSE) score at 6 months after operation in the two groups were recorded and analyzed. The operation time was significantly shorter in GG-TIP group than in G-TIP group ( P<0.05); but there was no significant difference ( P>0.05) between the two groups in terms of reconstructed urethral length and distance from meatus to ventral glans corona. All urinary meatus located at the tip of glans with vertical fissure shape. All children in the two groups were followed up 6-35 months (median, 26 months). During follow-up, there were 3 cases of urethral fistula, 2 cases of urethral stricture, and 1 case of glans separation in GG-TIP group, and 3, 3, and 1 cases in the G-TIP group, respectively. There was no significant difference in the incidence of complications between the two groups ( P>0.05). The maximum urinary flow rate at 2 weeks and the HOSE score at 6 months after operation were significantly higher in GG-TIP group than in G-TIP group ( P<0.05). GG-TIP is safe and effective for repairing hypospadias in children. Compared with G-TIP, it has the advantages of relatively simple operation, shortened operation time, significant improvement in urinary flow rate, and better cosmetic results.

Sex difference, growth pattern, and cephalic index of Turi ducks at different ages based on head morphometry

This study aims to determine the morphometric differences in the head of male and female Turi ducks. Ten male and ten female day-old ducks (DOD) were randomly selected by a lottery system from the population, raised, and had their head morphology measured using a digital caliper with an accuracy of 0.01 mm on the first day, and at the age of 2, 4, 6, and 8weeks. The result showed that male Turi duck had wider (p &lt;0.05) head at the ages of 1 day, 2 and 6 weeks, head length and head height at the ages of 1 day, 2, 4, 6, and 8 weeks, rostrum width at the ages of 1 day, 4, 6, and 8 weeks, and rostrum length at the age of 2, 4, 6 and 8 weeks. There were no significant differences (p &gt;0.05) in the head width at the ages of 4 and 8 weeks, rostrum width at 2 weeks, and rostrum length at 1day old male and female Turi ducks. Morphometric growth pattern showed that older Turi ducks (at a range of 1 day to 8 weeks) had larger (p &lt;0.05) head morphometry. However, the cephalic index in male and female Turi ducks was not significantly different (p &gt; 0.05) at all ages. It could be concluded that in general head morphometry was useful for determining male and female Turi ducks at the ages of 1 day, 2, 4, 6, and 8 weeks

Simplified formulas for calculating bearing capacities of standing seam metal roof systems under uniformly distributed downward and upward loads

Finite Element (FE) models of standing seam metal roof systems (SSMRSs) are established and verified by experimental results. A comprehensive parametric study on the bearing capacities of SSMRSs under uniformly distributed loads through FE simulations encompassing 281 SSMRSs is conducted. Simplified formulas for calculating the bearing capacities of SSMRSs under uniformly distributed loads are proposed as functions of fundamental parameters, including roof panel thickness, roof panel width, purlin spacing, material strength, friction coefficient, and support head width. These simplified formulas avoid the necessity for calculating the effective section during the verification of bending failure and avoid the necessity for wind uplift experiments during the verification of connection failure of the SSMRSs in conventional building codes and guidelines. The results show that for per 0.1 mm increase in roof panel thickness, the ultimate bearing capacities under downward and upward loads increase by about 14.03 % and 19.88 %; for per 100 mm increase in roof panel width, they decrease by about 27.14 % and 36.45 %; for per 200 mm increase in purlin spacing, they decrease by about 12.82 % and 5.01 %; for per 20 MPa increase in material strength, they increase by about 11.40 % and 2.24 %; for per 0.1 increase in friction coefficient, they increase by about 3.16 % and 9.01 %. Future studies can focus on the ultimate bearing capacities of SSMRSs under non-uniform loads with temporal and spatial fluctuation.

Cerebral Vascular Toxicity after Developmental Exposure to Arsenic (As) and Lead (Pb) Mixtures.

Arsenic (As) and lead (Pb) are environmental pollutants found in common sites linked to similar adverse health effects. This study determined driving factors of neurotoxicity on the developing cerebral vasculature with As and Pb mixture exposures. Cerebral vascular toxicity was evaluated at mixture concentrations of As and Pb representing human exposures levels (10 or 100 parts per billion; ppb; µg/L) in developing zebrafish by assessing behavior, morphology, and gene expression. In the visual motor response assay, hyperactivity was observed in all three outcomes in dark phases in larvae with exposure (1-120 h post fertilization, hpf) to 10 ppb As, 10 ppb Pb, or 10 ppb mix treatment. Time spent moving exhibited hyperactivity in dark phases for 100 ppb As and 100 ppb mix treatment groups only. A decreased brain length and ratio of brain length to total length in the 10 ppb mix group was measured with no alterations in other treatment groups or other endpoints (i.e., total larval length, head length, or head width). Alternatively, measurements of cerebral vasculature in the midbrain and cerebellum uncovered decreased total vascularization at 72 hpf in all treatment groups in the mesencephalon and in all treatment groups, except the 100 ppb Pb and 10 ppb As groups, in the cerebellum. In addition, decreased sprouting and branching occurred in the mesencephalon, while only decreased branching was measured in the cerebellum. The 10 ppb Pb group showed several cerebral vasculature modifications that were aligned with a specific gene expression alteration pattern different from other treatment groups. Additionally, the 100 ppb As group drove gene alterations, along with several other endpoints, for changes observed in the 100 ppb mix treatment group. Perturbations assessed in this study displayed non-linear concentration-responses, which are important to consider in environmental health outcomes for As and Pb neurotoxicity.

Morphometric Characterization and Principal Component Analysis of Different Goats Breeds

Goats play a very vital role in the livestock industry and are the only livestock not forbidden by any religion. Morphometric characterization is very important for the improvement of goat breeds and the proper classification of these animals. A linear measurement was carried out on sixty goats consisting of 20 each Red Sokoto (RS), West African Long logged (WLL), and West African Dwarf WAD) goat. Parameters measures were Withers height (WH), Rump height (RH), Body length (BL), Sternum height (SH), Body depth (BD), Bicostal diameter (BC), Ear length (EL), Rump width (RW), Head width (HW), Rump length (RL), Head length (HL) Heart girth (HG), Cannon bone Circumference (CB), Muzzle diameter (MD). The data collected was subjected to statistical analysis using R. version 4.0.2. It was observed that WH, RH, BL, SH, BD, BC, EL, RW, HW, RL, HL, HG, CB, and MD, exhibit variations across different age groups. For example, WH increases from 36.89 cm (at 1.00 years) to 63.98 cm (at 4.00 years), indicating a growth in wither height as goats increase in age. A significant difference (p&amp;lt;0.05) in the morphometric parameters across different age groups was observed. The lowest mean weight (11.50±1.1) was recorded in WAD while the highest (24.40±1.24) was recorded in WLL). These variations in weight were significant (p&amp;lt;0.05) across the breeds. Principal Component Analysis shows that four components contributed to 74% of the variation in the goat. The estimation classified the goats as heavy meat type while the Dactyl thorax index classified the WAD and RS as brevigline and the WLL as medigline. This study therefore contributes to a better understanding of goat morphology which has practical implications for livestock breeding and management programs. Informed decisions can also be made about breeding strategies, selecting animals specifically, and improving the overall goat population using the information provided in this study.

Morphometric study of the exuviae of Aeshna juncea (Linnaeus, 1758) (Odonata: Aeshnidae)

This study assessed various anatomical parameters of exuviae of three distinct populations of Aeshna juncea (Linnaeus, 1758) collected in Iran, the Netherlands and France. Fifty specimens (25 males, 25 females) from each country were analysed in detail. We measured 20 morphological traits for females and 19 traits for males. We found out that body length, left foreleg, left forewing sheath, left hindwing sheath, length of cercus, epiproct, epiproct spine, paraprocts and length of abdominal spines were larger in specimens originating from Iran compared to specimens collected in the studied areas of France and the Netherlands. In contrast, width of head and minimal width of prementum were larger in specimens from the Netherlands. According to our results, the measured morphological parameters indicated a greater similarity between the specimens found in France and the Netherlands compared to the specimens recorded in Iran. The presented data might be useful for future comparison of other populations of A. juncea throughout Eurasia.

Individual dietary specialization and intraspecific morphological divergence of an endemic fish species: the case of Glanidium ribeiroi in the Iguassu ecoregion

ABSTRACT Because of the importance of information about endemic species and global biodiversity ecoregion, we tested the hypothesis that individuals of Glanidium ribeiroi (endemic species in the Iguassu ecoregion) are specialists and that this specialization decreases with increasing body size, especially concerning the size of the mouth and head, which can be limiting for the quantity and size of prey consumed by smaller individuals. Fish sampling was conducted monthly using gill nets and longlines from 2013 to 2016 in the main channel of the Iguaçu River and two tributaries. We observed the consumption of aquatic insects by smaller individuals and seeds, unidentified fish, and Decapoda by larger individuals. Individual dietary specialization was high and related to head width. The morphological traits of smaller-sized individuals were related to displacement and movement (larger peduncle), and the larger-sized individuals were related to high performance in the exploitation and prey acquisition (larger head and mouth, dorsal eyes, longer intestines). Our results highlight the importance of assessing individual variations within a population, favoring an understanding of population dynamics. In addition, morphological differences may imply differences in the use of habitat and food resources between individuals of larger and smaller body sizes and influence individual specialization.

Larval Taxonomy of the Caddisfly Cernotina truncona Ross, 1947 (Trichoptera: Polycentropodidae)

The genus Cernotina Ross, 1938 is represented in the southeastern United States by three nominal species: Cernotina calcea Ross, 1938, Cernotina spicata Ross, 1938, and Cernotina truncona Ross, 1947. Of all Cernotina species, only the larva of C. spicata has been described to date. The goal of this paper is to describe, illustrate, and diagnose the larva of C. truncona using ecologically associated specimens. In addition, we used publicly available mitochondrial DNA barcoding data to evaluate the genetic relationships of these species. The larvae of Cernotina truncona can be distinguished from those of C. spicata by differences in setal placement and number on the meso- and metanota, mandibular morphology, head width, and distal setation of the tarsi. The ultrastructure of the anal claw is figured, highlighting the novel finding of small spines on the concave margin of a larva of Cernotina. With this new description, just the second described larva from this genus, only C. calcea remains unknown in the southeastern United States. The information provided herein enables the in-depth study of the ecology and life history of this diminutive caddisfly.

Intraspecific trait variation of carrion beetle species and communities across elevations

Abstract Filtering processes across environmental gradients can structure patterns of trait variation within communities. The community‐weighted mean (CWM) is a metric that is commonly used to indicate the directionality of such filtering processes and the optimal adaptive strategy of taxa within community. Proximity to the CWM indicates higher fitness, and deviations from this optimal value result in changes in the relative abundances of coexisting species. We investigated patterns of intraspecific trait variation in four coexisting carrion beetle species (Coleoptera: Silphidae) across elevational gradients. The study was conducted in temperate forest ecosystems with distinct natural vegetation zones ranging from 950 m to 1700 m above sea level. Of the 12 traits measured, we found that intraspecific variation ranged from 34% (body length) to 100% (ratio of elytra length, head length and head width to body length) and accounted for a larger proportion of variation than interspecific variation in 7 traits. For most traits, trait range, which indicates the niche breadth of species at a given elevation, was positively correlated with relative abundance. The CWMs of traits associated with long‐distance dispersal decreased with elevation, whereas those associated with microhabitat use showed the opposite trend. Soil temperature influenced tibia length after controlling for the effects of species identity, but soil water content had no effect on trait variation. Patterns of variation in body width and thorax width of two beetle species supported the CWM‐optimality hypothesis; however, patterns of trait variation in body width and thorax length of another species showed an opposite trend. Our study identifies several traits that can be highly variable within carrion beetle species. Such high levels of intraspecific trait variation may enable populations to adapt across a wide range of elevations and vegetation types.

Schistura sonarengaensis, a new species of cave-dwelling loach (Teleostei: Nemacheilidae) from Meghalaya, northeast India.

A new species of nemacheilid loach, Schistura sonarengaensis sp. nov., is described from three cave-dwelling populations (Barak-Surma-Meghna drainage) in the South Garo Hills district of Meghalaya, India. The new species possesses prominent eyes but is easily distinguished from all the congeners of the genus Schistura from Barak-Surma-Meghna and adjacent rivers drainages of northeast Indian (except S. syngkai) in having 13-26 vertically elongated to circular mid-lateral black blotches (brownish in life) overlayered on a grayish-black mid-lateral stripe on a dull white or pale-beige (golden brown in life) body. However, it can be easily distinguished from S. syngkai in having a complete (vs. incomplete) lateral line with more 72-89 (vs. 19-42) lateral-line pored scales, greater pre-dorsal length (48.5-53.1 vs. 41.9-44.1 %SL), a wider body at dorsal-fin origin (11.3-16.7 vs. 9.4-10.3 %SL), greater dorsal (18.1-21.1 vs. 15.1-17.0 %SL) and lateral (20.9-24.1 vs. 17.4-18.9 %SL) head length, a wider head (14.5-18.5 vs. 11.6-13.3 %SL), and moderately forked (vs. emarginated) caudal fin. Further, molecular analysis confirms the distinctiveness of S. sonarengaensis sp. nov. from its congeners found in northeast India by significant divergences with uncorrected genetic distance ranging from 3.7% to 17.3% in the mitochondrial cytochrome c oxidase subunit I (COI) gene dataset. The phylogenetic position of the new species with its sister species was evaluated using maximum likelihood and Bayesian analysis. The species delimitation approaches assemble species by automatic partitioning (ASAP) and Poisson tree processes (PTP) utilized for testing species assignments consistently identified our test group as a distinct species from its sister species. Although the new species lacks typical morphological adaptations usually associated with a subterranean life, such as complete absence (or vestigial presence) of eyes and pigmentation, it exhibits a reduction of pigmentation when compared to the epigean congeners.

The correlation analysis between incisal guidance angle and occlusal plane angles and temporomandibular joint morphology.

The correlations between the incisal guidance angle (IGA) and occlusal plane angles and temporomandibular joint (TMJ) morphology were investigated in adults with skeletal Class II division II malocclusion. CBCT images of 37 patients were analyzed. It included 19 cases of skeletal Class II division II malocclusion with low angle (study group) and 18 cases of skeletal Class I average angle (control group). The Invivo Dental 5 software was employed to acquire the data of the incisal guidance angle (IGA), occlusal plane angle (FH-OP), anterior occlusal plane angle (FH-AOP) and the TMJ measurement items. The results of IGA, FH-AOP angle and FH-OP angle showed the study group > the control group (P < 0.05). There were statistically difference in the condylar mediolateral diameters, articular eminence inclination and height, and posterior joint spaces between two groups. No differences were revealed in the condylar anteroposterior diameters, the condylar inclination angle, condylar head width and height, condylar length, glenoid fossa depth and width between two groups. In the study group, IGA showed a moderate correlation with FH-AOP, a weak correlation with FH-OP and condylar mediolateral diameters. Meanwhile, there was a correlation between FH-AOP, FH-OP, and TMJ indicators. The IGA was not only related to FH-AOP and FH-OP, but also to the condylar mediolateral diameters. In addition, there was a correlation between the occlusal plane angles and TMJ morphology in skeletal Class II division II low angle malocclusion. For patients with skeletal Class II division II low angle malocclusion, adjusting the IGA and the occlusal plane angles could improve the esthetic appearance of the anterior teeth, occlusal function, and TMJ morphology.

Impact of environmental pollution on ant (Camponotus japonicus) development and labial gland disease

Metallic pollutants can have harmful impacts on ant morphology and physiology. We studied the occurrence of labial gland disease in Camponotus japonicus from two polluted areas (traffic pollution and industrial pollution) and one non-polluted area. We further analyzed the metal levels (Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb and Zn) and morphological characteristics (head width, body mass, and other morphological traits) of both diseased and healthy workers. Our results showed that labial gland disease was only present in polluted areas, indicating that pollution stress makes ants more vulnerable to infections. Our research revealed that diseased ants in polluted areas accumulate higher levels of metals in their bodies and have lower dry weight and residual body mass compared to healthy ants in non-polluted environments, negatively impacting their development. We evaluated the importance of these elements and found that Cu has the greatest impact on the health risk of C. japonicus. Our study underscores the significant impact of environmental pollution on ant morphology and physiology and raises concerns about the broader ecological implications.