Wide-swath Spaceborne Synthetic Aperture Radar Research Articles

Accuracy Improvement of High-Resolution Wide-Swath Spaceborne Synthetic Aperture Radar Imaging with Low Pule Repetition Frequency

For a single-channel spaceborne synthetic aperture radar (SAR), the usage of a low pulse repetition frequency (PRF) is an effective technical way to extend the range swath. The sub-aperture imaging strategy is usually used to solve the problem of azimuth spectrum aliasing under the condition of a low PRF. However, the required up-sampling processing before the coherent synthesis of sub-images will lead to spectrum discontinuity between adjacent sub-images, which leads to an obvious grating lobe phenomenon after the process of sub-image synthesis, resulting in a significant decrease in image quality. For this issue, a high-resolution wide-swath (HRWS) imaging algorithm for a spaceborne SAR with a low PRF is proposed in this paper based on optimal spectrum shift processing. First, each sub-aperture is imaged using the typical range migration algorithm (RMA), and then all sub-images are up-sampled at the same time. Then, based on the criterion of the minimum grating lobe, the optimal spectrum shift is estimated. Finally, the spectrum of all sub-images is shifted and then all the shifted sub-images are synthesized coherently. The simulation data processing results verify the effectiveness of the proposed method.

A High-Resolution, Wide-Swath SAR Imaging System Based on Tandem SAR Satellites.

For the spaceborne synthetic aperture radar (SAR), it is difficult to obtain high resolution and wide width at the same time. This paper proposes a novel imaging system based on tandem SAR satellites, where one obtains coarse resolution and wide swath by the scanning mode, and the other obtains the undersampled echo from the same swath. The high resolution is achieved by associating the tandem SARs’ echo and using the minimum-energy-based algorithm. Finally, a high-resolution wide-swath SAR system is designed, and its imaging performance is verified by simulated data and real airborne SAR data.

Radiometric Degradation Associated With Terrain Height Variations and Pulse Duration in Scan-On-Receive SAR Images

Scan-on-receive (SCORE) is a key digital beamforming (DBF) technique for future high-resolution wide-swath spaceborne synthetic aperture radar (SAR) systems. Compared to a conventional approach, it allows improving the signal-to-noise ratio and the range ambiguity suppression. Nevertheless, it also exposes the system to new errors, associated with terrain height variations and pulse duration. This work investigates the mutual effect of these error sources on the SCORE SAR image. A novel, closed, a mathematical expression is derived, respectively, for the impulse response function of the image formation process and for the radiometric loss affecting the image pixels. This makes it possible to predict and quantify the effect of terrain height variations and pulse duration as a function of the system, processing, and geometric parameters. The numerical results, based on the end-to-end simulation of the SAR image formation process in different operational scenarios, highlight the relevance of this effect and the derived analytical description, especially in view of the demanding radiometric quality requirements imposed on future SAR images.

Onboard Digital Beamformer with Multi-Frequency and Multi-Group Time Delays for High-Resolution Wide-Swath SAR

Scan-on-receive (SCORE) digital beamforming (DBF) in elevation can significantly improve the signal-to-noise ratio (SNR) and suppress range ambiguities in spaceborne synthetic aperture radar (SAR). It has been identified as one of the important methods to obtain high-resolution wide-swath (HRWS) SAR images. However, with the improvement of geometric resolution and swath width, the residual pulse extension loss (PEL) due to the long pulse duration in the conventional spaceborne onboard DBF processor must be considered and reduced. In this paper, according to the imaging geometry of the spaceborne DBF SAR system, the reason for the large attenuation of the receiving gain at the edge of the wide swath is analyzed, and two improved onboard DBF methods to mitigate the receive gain loss are given and analyzed. Taking account of both the advantages and drawbacks of the two improved DBF methods presented, a novel onboard DBF processor with multi-frequency and multi-group time delays in HRWS SAR is proposed. Compared with the DBF processor only with multi-group time delays, the downlink data rate was clearly reduced, while focusing performance degradation due to phase and amplitude errors between different frequency bands could be mitigated compared with the DBF processor only with multi-frequency time delays. The simulation results of both point and distributed targets validate the proposed DBF processor.

Slow Pulse Repetition Interval Variation for High-Resolution Wide-Swath SAR Imaging

In the context of spaceborne synthetic aperture radar (SAR) imaging, high resolution and wide swath are inherently conflicting requirements. These may, however, be simultaneously satisfied by advanced imaging modes with multichannel architectures in elevation and/or azimuth. This article elaborates on a new mode based on multiple elevation beams and a simple pulse repetition interval (PRI) variation scheme which allows high-resolution wide-swath imaging. It is shown to use the illumination time more efficiently than ScanSAR and yet to be simpler than staggered SAR. Good SAR imaging performance is achieved with a rather compact antenna design. The proposed imaging mode is suitable for spaceborne SAR systems with planar and reflector antennas. In order to improve the imaging performance, a reflector antenna architecture with a multichannel feed in both elevation and azimuth is considered.

Advanced high-order nonlinear chirp scaling algorithm for high-resolution wide-swath spaceborne SAR

Spaceborne Synthetic Aperture Radar (SAR) is a well-established and powerful imaging technology that can provide high-resolution images of the Earth’s surface on a global scale. For future SAR systems, one of the key capabilities is to acquire images with both high-resolution and wide-swath. In parallel to the evolution of SAR sensors, more precise range models, and effective imaging algorithms are required. Due to the significant azimuth-variance of the echo signal in High-Resolution Wide-Swath (HRWS) SAR, two challenges have been faced in conventional imaging algorithms. The first challenge is constructing a precise range model of the whole scene and the second one is to develop an effective imaging algorithm since existing ones fail to process high-resolution and wide azimuth swath SAR data effectively. In this paper, an Advanced High-order Nonlinear Chirp Scaling (A-HNLCS) algorithm for HRWS SAR is proposed. First, a novel Second-Order Equivalent Squint Range Model (SOESRM) is developed to describe the range history of the whole scene, by introducing a quadratic curve to fit the deviation of the azimuth FM rate. Second, a corresponding algorithm is derived, where the azimuth-variance of the echo signal is solved by azimuth equalizing processing and accurate focusing is achieved through a high-order nonlinear chirp scaling algorithm. As a result, the whole scene can be accurately focused through one single imaging processing. Simulations are provided to validate the proposed range model and imaging algorithm.

Performance Evaluation of a Modified SweepSAR Mode for Quad-Pol Application in SAR Systems

Efficient earth observation using spaceborne synthetic aperture radar (SAR) requires the analysis of high-resolution wide-swath (HRWS) systems, which have a fine resolution and a short revisit time through wide-area observation, and quadrature-polarimetric (quad-pol) systems, which can obtain a quad-pol image and have many applications. The operational method of SAR generally affects system performance involving the system parameters and antenna patterns, and thus analyzing HRWS quad-pol SAR systems is essential to the system design. In this paper, an extension of the modified SweepSAR technique to a quad-pol observation scenario is performed and a comparison to ScanSAR and conventional SweepSAR is provided for a simulated scenario. On the basis of the system requirements, we selected the optimal parameters and designed a reflector antenna suitable for a wide-swath quad-pol SAR system. As a result of comparing the wide-swath quad-pol SAR operation modes, the modified SweepSAR mode demonstrated advantages in terms of system performance, such as the ambiguity ratio and swath width, and reflector antenna design for a spaceborne SAR system.

Beam-Switch Wide-Swath Mode for Interferometrically Compatible Single-Pol and Quad-Pol SAR Products

Future spaceborne synthetic aperture radar (SAR) systems are expected to deliver enormous quantity of data. Accordingly, the observation plan becomes crucial for a proper allocation of the mission resources. A central challenge is to reduce the number of acquisitions by making the same image available for more applications. Here, a relevant restriction is the interferometric incompatibility between fully polarimetric (QP) and single polarimetric (SP) SAR images, which typically occurs when the acquisitions are performed in burst mode, as in case of SAR products with wide coverage acquired by means of ScanSAR or terrain observation by progressive scanning (TOPS) technique. In order to overcome this limitation, a new operational mode, denoted as beam-switch wide-swath (BSWS), was conceived. The BSWS mode exploits the operational flexibility of future SAR systems to generate SP images, interferometrically compatible with the QP ones, keeping the wide coverage characteristic of the SP products. This letter presents in detail the BSWS mode, analyzing its functional principle, and imaging performance, based on a realistic future SAR system, the high-resolution wide-swath (HRWS) SAR, considered for the next generation of the Sentinel-1 mission.

Multichannel Staggered SAR Azimuth Processing

State-of-the-art and future spaceborne synthetic aperture radar (SAR) systems increasingly often face the requirement of providing high-resolution images with reduced revisit times, requiring coverage of wide swaths. Since these are contradicting drivers in terms of system design, different alternatives for high-resolution wide-swath SAR imaging have been investigated, relying on digital beamforming and the use of multiple receiver channels, both in elevation and azimuth dimensions. In this context, staggered SAR, which operates with a pulse repetition frequency (PRF) variation, using a single channel in azimuth proves itself as a promising alternative for covering wide continuous swaths with moderate azimuth resolution, whereas the use of multiple azimuth receiver channels bears the potential of improving the azimuth resolution over a given swath, but has yet only been applied to systems with a fixed PRF. This paper introduces and analyzes in detail processing techniques suitable for the combination of these techniques, leading to novel multichannel staggered SAR imaging modes with the potential for very fine azimuth resolution over ultra-wide swaths. A system concept with 2-m azimuth resolution over a 400-km swath in quad-pol is provided as an example.

A Range Ambiguity Resolution Approach for High-Resolution and Wide-Swath SAR Imaging Using Frequency Diverse Array

In spaceborne synthetic aperture radar (SAR), it is a challenging problem to realize high resolution and wide swath imaging (HRWS) due to the conflict between Doppler and range ambiguities. To mitigate this conflict, a range ambiguity resolution approach for HRWS SAR imaging using frequency diverse array (FDA) is proposed in this paper. The FDA employs a set of slightly different carrier frequencies, each of which is emitted by an individual array element. Frequency diversity introduces wave-path difference among the array elements, thus resulting in the range-angle-dependent property of transmit steering vector. Utilizing the extra degrees-of-freedom in range domain, FDA is capable of distinguishing the range ambiguous echoes in the spatial frequency domain. In our approach, the range ambiguous echoes are compensated by range dependence compensation (RDC) technique in the transmit spatial frequency domain. In the sequel, the range ambiguous echoes are separated by using a series of transmit beamformers as the echoes from different range regions are discriminable. Finally, traditional imaging processing is performed on the reconstructed unambiguous data to achieve HRWS imaging. Simulation results have verified the effectiveness of the proposed approach.

高分辨宽测绘带星载合成孔径雷达频域重构算法

高分辨宽测绘带星载合成孔径雷达频域重构算法

First Spaceborne Demonstration of Digital Beamforming for Azimuth Ambiguity Suppression

Over the past years, the use of multiple antenna apertures combined with digital beamforming (DBF) has been spotlighted as a promising solution for the fundamental restriction for high-resolution and wide-swath spaceborne synthetic aperture radar (SAR) imaging. In this paper, we present the first spaceborne experiment of a DBF technique on receive, using the TerraSAR-X dual receive antenna mode. For this experiment, we implemented a DBF module, which includes the reconstruction filter as a digital beam former and associated signal processing for calibration and channel balancing. The experimental results exhibit the successful ambiguity suppression capability of the DBF and validate the high potential of the DBF both for advanced future and current SAR systems.

Generation of Wide-Swath and High-Resolution SAR Images From Multichannel Small Spaceborne SAR Systems

Future spaceborne synthetic aperture radar (SAR) systems will be required to produce high-resolution imagery over a wide area of surveillance. However, the minimum antenna area constraint makes it a contradiction to simultaneously obtain both unambiguous wide-area and high azimuth resolution. To overcome this limitation, a technique has been suggested that combines a broad illumination source with multiple receiving channels. Then, the coherent combination of the recorded multichannel signals will allow for the unambiguous SAR mapping of a wide ground area with fine azimuth resolution. This letter first gives an overview of current research work carried out about the generation of wide-swath and high-resolution SAR images from multichannel small spaceborne SAR systems, and then a space-time adaptive processing (STAP) approach combined with conventional SAR imaging algorithms is presented, which could be of help to overcome the existing difficulties in data processing. The main idea of the approach is to use a STAP-based method to properly overcome the aliasing affect caused by the lower pulse repetition frequency and thereby retrieve the unambiguous azimuth wide (full) spectrum signal from the received signal. Following this operation, conventional SAR data processing tools can be applied to fully focus the SAR images. The performance of the approach is also discussed in this letter. The approach has the advantages of simplicity, robustness, and high efficiency.