Whispering Gallery Mode Optical Microresonators Research Articles

High-order Autler–Townes splitting in electrically tunable photonic molecules

Whispering gallery mode optical microresonators represent a promising avenue for realizing optical analogs of coherent light–atom interactions, circumventing experimental complexities. All-optical analogs of Autler–Townes splitting have been widely demonstrated, harnessing coupled optical microresonators, also known as photonic molecules, wherein the strong coupling between resonant fields enables energy level splitting. Here, we report the characterizations of Autler–Townes splitting in waveguide-coupled microring dimers featuring mismatched sizes. By exploiting backscattering-induced coupling via Rayleigh and Mie scatterers in individual rings, high-order Autler–Townes splitting has been realized, yielding supermode hybridization in a multi-level system. Upon resonance detuning using an integrated phase shifter, intra-cavity coupling-induced splitting becomes almost indistinguishable at the zero-detuning point where the strong inter-cavity coupling counteracts the imbalance of backscattering strengths in individual rings. Through demonstrations on the maturing silicon photonics platform, our findings establish a framework of electrically tunable photonic molecules for coupling-mediated Autler–Townes splitting, offering promising prospects for on-chip signal generation and processing across classical and quantum regimes.

High Q-factor reconfigurable microresonators induced in side-coupled optical fibres

High Q-factor monolithic optical microresonators found numerous applications in classical and quantum optical signal processing, microwave photonics, ultraprecise sensing, as well as fundamental optical and physical sciences. However, due to the solid structure of these microresonators, attaining the free spectral range tunability of most of them, critical for several of these applications, was, so far, unfeasible. To address this problem, here we experimentally demonstrate that the side-coupling of coplanar bent optical fibres can induce a high Q-factor whispering gallery mode optical microresonator. By changing the curvature radius of fibres from the centimetre order to the millimetre order, we demonstrate fully mechanically reconfigurable optical microresonators with dimensions varying from the millimetre order to 100-micron order and free spectral range varying from a picometre to ten picometre order. The developed theory describes the formation of the discovered microresonators and their major properties in a reasonable agreement with the experimental data. The new microresonators may find applications in cavity QED, microresonator optomechanics, frequency comb generation with tuneable repetition rate, tuneable lasing, and tuneable processing and delay of optical pulses.

Fabrication of high-Q crystalline whispering gallery mode microcavities using single-point diamond turning

A method for the fabrication of high-Q crystalline whispering gallery mode optical microresonators using diamond turning and further asymptotic abrasive polishing is developed and described. The proposed method allows the fabrication of microresonators with a predefined geometry and a Q-factor higher than 107. A step-by-step fabrication procedure is presented, important parameters ensuring the optimal quality of the surface of the fabricated microresonators are determined, the inspection procedure for the principal parameters is described, and a review of the fabrication of microresonators from different materials is presented.

Analysis of nonreciprocal noise based on mode splitting in a high-Q optical microresonator

The whispering gallery mode optical microresonator offers a high quality factor, which enables it to act as the core component of a high sensitivity resonator optic gyro; however, nonreciprocal noise limits its precision. Considering the Sagnac effect, i.e. mode splitting in high-quality optical micro-resonators, we derive the explicit expression for the angular velocity versus the splitting amount, and verify the sensing mechanism by simulation using finite element method. Remarkably, the accuracy of the angular velocity measurement in the whispering gallery mode optical microresonator with a quality factor of 108 is 106 °/s. We obtain the optimal coupling position of the novel angular velocity sensing system by detecting the output transmittance spectra of different vertical coupling distances and axial coupling positions. In addition, the reason for the nonreciprocal phenomenon is determined by theoretical analysis of the evanescent distribution of a tapered fiber. These results will provide an effective method and a theoretical basis for suppression of the nonreciprocal noise.

Ringing phenomenon based measurement of weak mode-coupling strength in an optical microresonator

There is always a coupling between the degenerate clockwise (CW) and counter-clockwise (CCW) modes in a whisperinggallery- mode (WGM) optical microresonator, since the surface of the microresonator can not be perfectly smooth. It is important to measure this coupling strength in many applications. When the coupling strength is strong, the conventional method by observing mode splitting in the stationary spectrum can be used to measure its value. However, when the coupling strength is weak, the conventional method will not work. We experimentally demonstrate that the ringing phenomenon can be used to measure weak coupling strength between the CW and CCW modes in a WGM optical microresonator.

Integrating Nanostructured Artificial Receptors with Whispering Gallery Mode Optical Microresonators via Inorganic Molecular Imprinting Techniques.

The creation of label-free biosensors capable of accurately detecting trace contaminants, particularly small organic molecules, is of significant interest for applications in environmental monitoring. This is achieved by pairing a high-sensitivity signal transducer with a biorecognition element that imparts selectivity towards the compound of interest. However, many environmental pollutants do not have corresponding biorecognition elements. Fortunately, biomimetic chemistries, such as molecular imprinting, allow for the design of artificial receptors with very high selectivity for the target. Here, we perform a proof-of-concept study to show how artificial receptors may be created from inorganic silanes using the molecular imprinting technique and paired with high-sensitivity transducers without loss of device performance. Silica microsphere Whispering Gallery Mode optical microresonators are coated with a silica thin film templated by a small fluorescent dye, fluorescein isothiocyanate, which serves as our model target. Oxygen plasma degradation and solvent extraction of the template are compared. Extracted optical devices are interacted with the template molecule to confirm successful sorption of the template. Surface characterization is accomplished via fluorescence and optical microscopy, ellipsometry, optical profilometry, and contact angle measurements. The quality factors of the devices are measured to evaluate the impact of the coating on device sensitivity. The resulting devices show uniform surface coating with no microstructural damage with Q factors above 106. This is the first report demonstrating the integration of these devices with molecular imprinting techniques, and could lead to new routes to biosensor creation for environmental monitoring.

PEG Functionalization of Whispering Gallery Mode Optical Microresonator Biosensors to Minimize Non-Specific Adsorption during Targeted, Label-Free Sensing.

Whispering Gallery Mode (WGM) optical microresonator biosensors are a powerful tool for targeted detection of analytes at extremely low concentrations. However, in complex environments, non-specific adsorption can significantly reduce their signal to noise ratio, limiting their accuracy. To overcome this, poly(ethylene glycol) (PEG) can be employed in conjunction with appropriate recognition elements to create a nonfouling surface capable of detecting targeted analytes. This paper investigates a general route for the addition of nonfouling elements to WGM optical biosensors to reduce non-specific adsorption, while also retaining high sensitivity. We use the avidin-biotin analyte-recognition element system, in conjunction with PEG nonfouling elements, as a proof-of-concept, and explore the extent of non-specific adsorption of lysozyme and fibrinogen at multiple concentrations, as well as the ability to detect avidin in a concentration-dependent fashion. Ellipsometry, contact angle measurement, fluorescence microscopy, and optical resonator characterization methods were used to study non-specific adsorption, the quality of the functionalized surface, and the biosensor’s performance. Using a recognition element ratio to nonfouling element ratio of 1:1, we showed that non-specific adsorption could be significantly reduced over the controls, and that high sensitivity could be maintained. Due to the frequent use of biotin-avidin-biotin sandwich complexes in functionalizing sensor surfaces with biotin-labeled recognition elements, this chemistry could provide a common basis for creating a non-fouling surface capable of targeted detection. This should improve the ability of WGM optical biosensors to operate in complex environments, extending their application towards real-world detection.

Interfacing Whispering Gallery Mode Optical Microresonator Biosensors with the Plant Defense Elicitor Chitin

The biomaterial class of chitooligosaccharides (chitin), commonly found in insects and fungi, is one of the most abundant on earth. Substantial evidence implicates chitin in mediating a diverse array of plant cellular signaling events, including the induction of plant defense mechanisms against invading pests. However, these recognition and mediation mechanisms, including the binding kinetics between chitin and their plant recognition receptors, are not fully understood. Therefore, the creation of a platform capable of both interfacing with chitin and plant cell receptors, and monitoring their interactions, would significantly advance our understanding of this plant defense elicitor. Recently, a label-free, highly sensitive biosensor platform, based on Whispering Gallery Mode optical microresonators, has been developed to study such biomolecular interactions. Here, we demonstrate how this unique platform can be interfaced with chitin using simple carbohydrate chemistry. The surface chemistry is demonstrated using X-ray photoelectron spectroscopy, fluorescence microscopy, optical profilometry, ellipsometry, and contact angle measurements. The resulting surface is uniform, with an average surface roughness of 1.25nm, and is active toward chitin recognition elements. Optical loss measurements using standard quantitative cavity analysis techniques demonstrate that the bioconjugated platforms maintain the high performance (Q>106) required to track binding interactions in this system. The platform is able to detect lectin, which binds COs, at 10μg/mL concentration. This biosensor platform's unique capabilities for label-free, high sensitivity biodetection, when properly interfaced with the biomaterials of interest, could provide the basis for a robust analytical technique to probe the binding dynamics of chitin–plant cell receptors.