Welding Configuration Research Articles

The Effect of Tool Rotational Speed and Welding Configuration on the Mechanical Properties of High Density Polyethylene (HDPE) Plate Friction Stir Welded Joint

The study investigates the impact of tool rotational speed and welding configuration on the mechanical properties of friction stir welded joints of HDPE plates. The plates were cut into rectangular shapes and clamped on a metal plate for FSW welding. Two welding configurations were used: single-side welding (SS) and double-side welding (DS), with rotational speeds of 900, 1500, and 2000 rpm. The plates were subjected to tensile and bending tests, and angular distortion was also measured. The findings suggest that decreasing the tool's rotational speed to 900 rpm and using double-side welding reduces angular distortion and improves tensile and flexural strength. The study emphasizes the importance of defect reduction techniques in improving the mechanical properties of HDPE FSW joints.

Seam tracking and gap bridging during robotic laser beam welding via grayscale imaging and wobbling

The use of laser beam welding with robotic manipulators is expanding towards wider industrial applications as the system availability increases with reduced capital costs. Conventionally, laser welding requires high positioning and coupling accuracy. Due to the variability in the part geometry and positioning, as well as the thermal deformation that may occur during the process, joint position and fit-up are not always acceptable nor predictable a-priori if simple fixtures are used. This makes the passage from virtual CAD/CAM environment to real production site not trivial, limiting applications where short part preparations are a need like small-batch productions. Solutions that render the laser welding operations feasible for production series with non-stringent tolerances are required to serve a wider range of industrial applications. Such solutions should be able to track the seam as well as tolerating variable gaps formed between the parts to be joined. In this work, an online correction for robot trajectory based on a greyscale coaxial vision system with external illumination and an adaptive wobbling strategy are proposed as means to increase the overall flexibility of a manufacturing plant. The underlying vision algorithm and control architectures are presented; the robustness of the system to poor illumination conditions and variable reflection conditions is also discussed. The developed solution employed two control loops: the first is able to change the robot pose to follow varying trajectories; the second, able to vary the amplitude of circular wobbling as a function of the gap formed in butt-joint welds. Demonstrator cases on butt-joint welds with AISI 301 stainless steel with increased complexity were used to test the efficacy of the solution. The system was successfully tested on 2 mm thick, planar stainless-steel sheets at a maximum welding speed of 25 mm/s and yielded a maximum positioning and yaw-orientation errors of respectively 0.325 mm and 4.5°. Continuous welds could be achieved with up to 1 mm gaps and variable seam position with the developed control method. The acceptable weld quality could be maintained up to 0.6 mm gap in the employed autogenous welding configuration.

Micro-macro properties of stainless-clad bimetallic steel welded connections with different configurations

This paper aims to investigate the microstructure and mechanical properties of S31603 + Q355B stainless-clad (SC) bimetallic steel welded connections with different welding configurations. A comprehensive research approach was employed, including microstructure analysis, static tensile test, impact test, bending test, Vickers hardness distribution measurement, and analysis of welding economy and efficiency. Four types of welded connections were examined to understand their performance variations arising from different welding configurations. Based on the findings, a recommended welding configuration suitable for structural engineering applications was proposed. Research outcomes showed that the decarburization and carbon accumulation zones were observed at the fusion interface during the welding of dissimilar metals. It should be noted that martensite was formed in the substrate, or the base metal, due to diffusion of alloying elements, with a more pronounced effect observed with higher welding heat inputs. In order to minimize the fusion area of dissimilar metals, it is advisable to avoid using a single welding consumable made of stainless steel as the mechanical properties of the welded connection were not significantly influenced by the use of stainless steel welding consumables with higher Nickle (Ni) and Chromium (Cr) alloying content in the transition region. Consequently, the same welding consumable should be employed in the transition region to simplify the welding procedure and to enhance the welding efficiency.

The grey-based Taguchi method was used to enhance the TIG-MIG hybrid welding process parameters for mild steel

Metal Industry and Machine Technology Development Enterprise is Ethiopia's leading manufacturing industry, producing a diverse range of industrial machinery and products. The main welding process used to join the products is MIG welding, which has several flaws, including low weld-metal toughness, spatter formation, undercut formation, and finally poor tensile strength and toughness. The company also uses TIG welding, which uses an inert gas to produce less smoke and fumes. While this technology produces precise welds, it is a time-consuming operation with a lower production rate. As a result, a special type of welding process is required that incorporates the properties of both types of welding processes. As a result, the hybrid TIG-MIG welding configuration was proposed. The optimization of process parameters of EN24 mild steel material for TIGMIG hybrid welding is presented in this paper. The test was carried out on a 6 mm EN24 mild steel plate. The butt joint configuration was used. MIG welding current, TIG welding current, MIG welding voltage, TIG welding voltage, and welding gun travel speed were used as process parameters. A single-level L27 orthogonal array is used to optimize process parameters. Tensile and hardness tests are used to evaluate the mechanical properties of the weld joint. The optimum level setting of the test, according to the mean effect plot of GRG, is MIG welding current of 200 A, MIG welding voltage of 15 V, TIG welding current of 200 A, TIG welding voltage of 18 V, and welding gun travel speed of 5 mm/s. The significant process parameters were investigated using ANOVA. MIG welding current and MIG welding voltage were significant factors in the ANOVA, with percentage contributions of 44.19% and 49.20%, respectively. Five confirmation tests were performed, and the results show that the mean grey relational grade of the conformation test was 0.7594, which falls within the 90% confidence interval, indicating that the experiment is reliable. Finally, MIG welding, TIG welding, and TIG-MIG hybrid welding processes were compared, with the results indicating that TIG-MIG hybrid welding has the highest hardness and tensile strength of all. Based on the findings, it is possible to conclude that the company should use the hybrid welding method to improve the weld joint's hardness and tensile strength.

Microstructure and mechanical property of bonding zones between Ta foil and steel plate fabricated by explosive welding

This work aims to produce a thorough comprehension concerning microstructure related properties of the joint interface between Ta foil and steel plate fabricated by explosive welding. For this, a self-developed explosive welding configuration was employed to join Ta foil and steel plate, and different microscopic methods were adopted to investigate its microstructures and mechanical properties. It was found that the Ta/Fe interface was featured by regular wavy structures with a well-defined amplitude and period. The melted zones were mainly observed within the vortex structures, and occasionally at the Ta/Fe interfaces, which were formed by intense mixing of participating metals. The EBSD analyses revealed a diversity of the grain structures near the Ta/Fe interface, such as formation of the curved and elongated grains in Ta matrix, and fine equiaxed and columnar grains in Fe matrix. Especially, several adiabatic shear bands (ASBs) characterized by small equiaxed grains were found in Fe matrix, which were due to stress wave concentration in the narrow paths, and the materials in these zones underwent a recrystallization process. Finally, the nanoindentation results revealed inhomogenous mechanical behaviors in the bonding zones, which could be well related to the changes of microstructure and chemical composition.

Tailoring the weld microstructure to prevent solidification cracking in remote laser welding of AA6005 aluminium alloys using adjustable ringmode beam

Solidification cracking is a prevalent defect in welding aluminium alloys which can be effectively mitigated by employing grain refinement strategies. This paper investigates the feasibility of tailoring the weld zone grain structure of 6xxx series aluminium alloys using an adjustable ring mode (ARM) laser beam to reduce the centreline cracking susceptibility. An in-process monitoring approach, comprising a high-speed camera and an ad-hoc Digital Image Correlation, was adopted to examine the strain development during laser welding on a self-restraint test rig. Results revealed that transverse strain in the weld centre exhibits a parabola-like relationship with the core/ring power ratio, with the minimum strain determined at the power ratio of ∼1.5, regardless of the total power employed. The microstructural analysis demonstrated that increasing the core/ring power ratio can lead to the refinement of columnar and equiaxed grains. Furthermore, the formation of secondary equiaxed grains is promoted when the power ratio increases, and this is proved to be related to the characteristic of the ARM laser by the like-for-like comparison. Overall, a fine-tuned power ratio of 1.5 is determined in the studied material and welding configuration for achieving a centreline crack free weld, benefiting from the improved microstructure and reduced thermal strain.

Optimization of the Pressure Resistance Welding Process for Nuclear Fuel Cladding Coupling Experimental and Numerical Approaches

An approach coupling experimental tests and numerical simulation of the pressure resistance welding (PRW) process is proposed for optimizing fuel cladding welds for the new generation of nuclear reactors. Several experimental welds were prepared by varying the dissipated energy, which accounts for the effect of electric current and welding time applied during the PRW process. A working zone, a function of both applied dissipated weld energy and plug-displacement, was then identified on the basis of the microscopy observations of the weld defects. In addition, the numerical approach, based on a 2D axisymmetric multi-physics finite element model, was developed to simulate the PRW process in a plug-tube configuration. The proposed model accounted for interactions between the electrical, thermal and mechanical phenomena and the electro-thermo-mechanical contact between the pieces and electrodes. Numerical simulations were first validated by comparison to experimental measurements, notably by comparing the plug-displacement and the size and position of the heat-affected zone (HAZ). They were then used to assess the effect of the applied parameters on the maximum temperature and cumulated plastic strain reached during welding and the effect of the welding force on the quality of the weld. According to the numerical computations, the maximum temperature reached in the weld remains well below the melting temperature. Changing the welding force implies also modifying the applied energy in order to maintain the quality of the welds. Applied to different plug and clad geometries, the proposed model was shown to be useful for optimizing the joint plane for such a welding configuration.

Influence of the Process Parameters on the Properties of Cu-Cu Ultrasonic Welds

Ultrasonic welding (USW) is a solid-state welding process based on the application of high frequency vibration energy to the workpiece to produce the internal friction between the faying surface and the local heat generation required to promote the joining. The short welding time and the low heat input, the absence of fumes, sparks or flames, and the automation capacity make it particularly interesting for several fields, such as electrical/electronic, automotive, aerospace, appliance, and medical products industries. The main problems that those industries have to face are related to the poor weld quality due the improper selection of weld parameters. In the present work, 0.3 mm thick copper sheets were joined by USW varying the welding time, pressure, and vibration amplitude. The influence of the process variables on the characteristics of the joints and weld strength is investigated by using the analysis of variance. The results of the present work indicate that welding time is the main factor affecting the energy absorbed during the welding, followed by the pressure and amplitude. The shear strength, on the other hand, resulted mostly influenced by the amplitude, while the other parameters have a limited effect. Regardless the welding configuration adopted, most welds registered a failure load higher than the base material pointing out the feasibility of the USW process to join copper sheets.

Laser beam welding of NiTinol sheets in butt joint arrangement and optimization of the process using desirability function analysis and metaheuristic techniques

Proper joining techniques of NiTinol, a widely used functional advanced material in many fields, would provide increased design flexibility among design engineers in terms of smart design for multifunctional systems. Laser welding is the widely utilized welding technique of NiTinol which can retain the superior characteristics of the material after welding. The effect of process parameters on the microstructure, mechanical properties, bead geometry, and new phase formation in butt welding configuration using fiber laser for a 2-mm thick NiTinol sheet was ascertained by this study. The scan speed, laser power, duty factor, frequency, and focal positions were used as input process variables, while microhardness and bead area were considered as output variables. Regression analysis was executed so as to create the input–output interactions. The optimization method was used with the goal of obtaining the smallest bead that met the condition of the bead having the least change in microhardness from the base material. The problem was devised as a constrained one and resolved using four metaheuristic techniques, such as Particle swarm optimization, Genetic algorithm, Jaya algorithm, and Bonobo Optimizer. The outcomes of these new procedures were also assessed using a traditional method called desirability function analysis. The results estimated utilizing all the different optimization techniques and the investigative data were established to be in excellent agreement.

Joining of metal and non-polar polypropylene composite through a simple functional group seeding layer

Polypropylene (PP) and its composites are one of the hardest to directly join with metals due to their inherent chemical incompatibility. This paper presents a simple, efficient, and cost-effective method for joining PP composite to aluminum alloy in spot welding configuration by seeding the functional groups via an insert layer of PA6 thin film without requiring surface or material pre-treatment. The resulting joint loading capacity is shown to be sufficiently high to consistently develop failures in PP substrates in lap shear tensile tests away from the bonded area. Joint interface microstructure features are examined in detail. Bonding mechanisms are then described based on the detailed observations obtained in this study.

A detection and configuration method for welding completeness in the automotive body-in-white panel based on digital twin

To address the problems of poor welding completeness and inefficient configuration for defective automotive body-in-white panels, we propose a method for detecting and configuring the welding completeness of automotive body-in-white panels based on digital twin (DT) and mixed reality (MR). The method uses DT to build an MR-oriented DT framework for the detections and configuration of body-in-white panel welding completeness. We propose a method to build a DT knowledge base for panels, a Yolov4-based welding completeness detection method, and a MR-based configuration method for the welding completeness in panels. Our team develop a panel welding completeness detection and configuration system to fully validate the effectiveness of the method.

Numerical Analysis Growth Kinetics of Dendrite Tip during Laser Welding Nickel-Based Single-Crystal Superalloy Part II: Expedient Favorite of Undercooling-Limited Epitaxy

When multicomponent molten pool nonequilibrium solidification, the interrelationship of location-dependent dendrite tip undercooling on low heat input and optimal growth crystallography is progressively discussed over planar interface morphology stability range to unidirectionally facilitate epitaxial growth by single-crystallinity control during laser repair of nickel-based superalloy to inhibit microstructure heterogeneity. Suppression of disoriented dendrite growth and crystallography orientation deviation along columnar interface is necessary for crackless repair. Axis-symmetrical (001)/[100] welding configuration kinetically reduces dendrite tip undercooling, nucleation and subsequent disoriented dendrite growth rather than unsymmetrical (001)/[110] welding configuration. When comparison between low heat input, within which laser power is limited and welding speed is rapid, and high heat input, within which laser power is considerable and welding speed is insignificant, the former attenuates dendrite tip undercooling and morphology transition between columnar and equiaxed dendrites to stabilize epitaxy and ameliorate dendrite growth with advantageous solidification conditions, especially drastic temperature gradient and small dendrite growth velocity. Axis-symmetrical growth crystallography and low heat input are favored to mitigate size of high-undercooling region, where stray grain formation are dominant, for homologous single-crystallization of epitaxial growth with satisfactory growth kinetics of dendrite tip, and are capable of elimination of undercooling-induced overgrowth for high quality weld, instead of aggressive unsymmetrical growth crystallography and high heat input. Additionally, the achievement of low heat input with axis-symmetrical welding configuration possesses stronger resistance to unstable interface morphology and solidification cracking. When comparison between growth regions of [100] and [010] crystalline orientation, where identical heat input is kept on both sides, wider dendrite tip undercooling is mainly located on the right side than left side to insidiously exacerbate crack-vulnerable dendrite growth, which is a ubiquitous phenomenon in the adverse (001)/[110] welding configuration. The effect of low heat input on dendrite tip undercooling is spontaneously smaller than growth crystallography. Hence, during nonequilibrium solidification of weld pool, the important mechanism of crystallography-induced microstructure heterogeneity obviation due to undercooling-limited epitaxial growth is consequently provided. The theoretical predictions cogently explain the experiment results in a concise way to properly illustrate microstructure degradation phenomena in the both sides of weld by reproducible calculation of mathematical modeling.

Numerical Analysis Nucleation and Growth Conditions of Single-Crystallinity Control during Laser Surface Modification of Ni-Based Single-Crystal Superalloy Part I: Thermal and Chemical Determinants

Nucleation and growth conditions of single-crystallinity control are convincingly elaborated by multi-scale mathematical modeling of heat and mass transport to totally abate undesirable weld defects, e.g. disoriented crystal and hot cracking inside molten pool of nonequilibrium crystallization, in order to illustrate the usefulness of predictive capability through theory and experiment procedures. Crystal growth is complicated by crystallinity-dependent thermal and chemical driving forces in front of dendrite tip during viable laser surface modification of Ni-based single-crystal superalloy. These two thermal metallurgical determinants play crucial role in crack-insusceptible columnar crystal growth, which is favorably oriented throughout weld depth. There is particular challenge in complete elimination of disoriented crystal, i.e. stray grain formation, for acceptable surface quality. Conservative (001)/[100] crystalline orientation is desired to diminish Al concentration and supersaturation, and morphologically satisfy epitaxial growth kinetics to successfully lessen central cracking with satisfactory variability of laser power and welding speed. Comparatively, (001)/[110] crystalline orientation is disadvantageous to asymmetrically augment Al concentration and supersaturation and aggressively increase interface instability, microstructure heterogeneity and hot cracking vulnerability along disoriented crystal boundaries. Disoriented crystal is increasingly withstood if the Al concentration and supersaturation in front of dendrite tip are low enough and crack-unsusceptible part is relatively large enough in case of attractive (001)/[100] crystalline orientation with optimal range of heat input to ameliorate microstructure homogeneity. Crystalline orientation region varies with diverse welding configurations, and epitaxy across solid/liquid interface is also sensitive to heat input of laser processing, which necessitate high efficient welding conditions optimization. Considerable effort is made to distinguish diffusion-driven crystal growth between a series of combinations of multiple welding conditions, such as critical welding configuration and heat input. Metallographically, the morphologies of crystal growth and hot cracking are experimentally observed to consistently support kinetics calculation result and well explain correlation between solidification behavior and crystal growth.

Numerical Analysis of Nucleation and Growth of Stray Grain Formation during Laser Welding Nickel-Based Single-Crystal Superalloy Part II: Solidification Cracking Diminution through Single-Crystallinity Control

The effect of thermo-metallurgical factors, such as heat input and welding configuration, on solidification cracking driving forces nearby dendrite tip, such as solidification temperature range and columnar/equiaxed transition (CET) was thermodynamically and kinetically discussed with aid of comprehensive numerical analysis for multicomponent melt-pool solidification during laser processing under non-equilibrium solidification conditions to better understand problematical solidification cracking phenomena. By using (001)/[100] welding configuration, axisymmetrical distributions of columnar/equiaxed transition and solidification temperature range alongside solidification interface are homogeneously produced on both sides of weld pool. By using (001)/[110] welding configuration, nonaxisymmetrical distributions are heterogeneously produced, and are able to bring about infelicitous microstructure degradation. Unidirectional region of [001] columnar dendrite is more prone to epitaxial growth without morphology transition to conservatively better crystallography-assisted single-crystal growth. Unidirectional epitaxial growth is collapsed, and onset of stray grain nucleation and solidification cracking eventuates in [100] region of equiaxed dendrite growth. Low heat input relatively broadens portion of unidirectional columnar dendrite, where stray grain is infrequently nucleated and grown, and thus morphology transition seldom happens, as long as undercooling and solidification temperature range alongside dendrite tip are sufficient low to challengingly develop crackless dendrite growth and high-quality weld by thermometallurgy-aided single-crystallinity control. Auspicious (001)/[100] welding configuration simultaneously abates overall stray grain nucleation and constricts solidification temperature range nearby fusion boundary to wane microstructure heterogeneity. Conversely, plenteous stray grain formation is kinetically attained and extensive solidification temperature range nearby fusion boundary is thermodynamically obtained by problematical (001)/[110] welding configuration to metallurgically induce pernicious equiaxed dendrite and disintegrate dendrite growth. Moreover, the mechanism of solidification cracking diminution as consequence of appropriate optimization of thermo-metallurgical determinants during multicomponent nickel-based single-crystal superalloy melt-pool non-equilibrium solidification is also proposed. The potent consistency between the predicted and experimented results is exceedingly tenable.

Numerical Analysis of Nucleation and Growth of Stray Grain Formation during Laser Welding Nickel-Based Single-Crystal Superalloy Part III: Kinetic and Thermodynamic Obviation of Solidification Cracking

To pertinently balance growth kinetics, solidification thermodynamics and dendrite expitaxy of multicomponent nickel-based single-crystal supralloy during laser processing, effect of thermometallurgy determinant factors, including laser power, welding speed and welding configuration, on solidification behavior, such as nonequilibrium solidification temperature range, and dendrite growth, such as dendrite trunk spacing, are progressively advanced to forestall solidification cracking phenomena. Symmetric developments of dendrite trunk spacing and solidification temperature range alongside solid/liquid interface are crystallographically driven by useful (001)/[100] welding configuration to auspiciously bring about crack-insusceptible and well-oriented dendrite growth. Dissimilarly, unsymmetrical developments of dendrite trunk spacing and solidification temperature range alongside solid/liquid interface are crystallographically driven by (001)/[110] welding configuration to insidiously favor crack-unresistant and disoriented dendrite growth. Higher heat input thermodynamically and kinetically boosts wide solidification temperature range, appalling stray grain growth with excess of solute ahead of dendrite tip and large size of crack-unresistant region to thermometallurgically disintegrate epitaxial growth for untoward solidification cracking, and therefore should be strictly withstood. Although geometry of symmetrical weld pool both sides is the same in infelicitous (001)/[110] welding configuration, [100] region of dendrite growth is more liable to ruinous stray grain growth and extensive solidification temperature range than [010] region of dendrite growth to complicate dendrite growth and exacerbate weld integrity. The determinant mechanism of crystallography-aided amelioration of solidification cracking resistance as result of kinetics-and thermodynamics-driven dendrite growth is propitiously proposed. Furthermore, the credible and understandable theoretical predictions are in conformity with the experiment results.

Numerical Analysis of Nucleation and Growth of Stray Grain Formation during Laser Welding Nickel-Based Single-Crystal Superalloy Part I: Morphology and Size of Dendrite Growth

The dependency of morphology development and dendrite growth on welding conditions (laser power, welding speed and welding configuration) is numerically analyzed to decrease nucleation and growth of stray grain formation during laser processing aerospace component surface of ternary Ni-Cr-Al single-crystal superalloy. Proper (001)/[100] welding configuration crystallographically initiates three axisymmetrical distributions of microstructure development, i.e. stray grain formation, morphology development and dendrite trunk spacing, alongside the advancing solid/liquid interface of molten pool, whereby metallurgical properties are increased. Unpromising (001)/[110] welding configuration tends to crystallographically possesses unaxisymmetrical microstructure development to favor substantial crack-vulnerable dendrite size and morphology. Epitaxial [001] columnar dendrite growth region is favored for single-crystal dendrite growth, while vulnerable [100] equiaxed dendrite growth region is more susceptible to solidification cracking. The lower heat input is used, the smaller stray grain formation, negligible columnar/equiaxed transition (CET) and finer dendrite trunk spacing are consistently promoted by narrower constitutional undercooling ahead of solid/liquid interface to improve crack-resistant microstructure development and weld integrity. When comparing between [100] dendrite growth region on the right side and [010] dendrite growth region on the left side, (001)/[110] welding configuration spontaneously engenders severer stray grain formation, insidious columnar/equiaxed transition and coarser dendrite trunk spacing on the right side to deteriorate microstructure development with restriction of the same heat input on both sides of weld pool. The mechanism of asymmetrical solidification cracking as result of crystallography-induced microstructure degradation is therefore proposed. The theoretical predictions of asymmetrical solidification cracking susceptibility are comparable with experiments.

Numerical Analysis Growth Kinetics of Dendrite Tip during Laser Welding Nickel-Based Single-Crystal Superalloy Part I: Supersaturation-Driven Dendrite Growth

When three welding conditions, including welding configuration, welding speed and laser power, are sequentially altered, supersaturation of liquid aluminum is crystallography-dependently determined to limit growth kinetics of dendrite tip with decease of thermo-metallurgical factors for solidification cracking to salvage the weld properties during emerging laser welding repair of multicomponent nickel-based single-crystal superalloy. After comparing growth crystallography between right side and left side of weld, the distribution of supersaturation of liquid aluminum is axis- symmetrically developed by favorite (001)/[100] dendrite growth kinetics, while the distribution is nonaxisymmetrically developed by detrimental (001)/[110] dendrite growth kinetics. High heat input is inappropriately procured by either high laser power or slow welding speed to insidiously boost supersaturation of liquid aluminum, worsen alloying partition and solute copiousness, heterogeneously exacerbate morphology and size of dendrite growth, whereby stray grain formation is strongly produced. In order to ameliorate dendrite growth, low heat input is usefully rendered by either low laser power or high welding speed to attenuate supersaturation of liquid aluminum, narrow solidification temperature range and obviate dendrite tip undercooling alongside columnar interface in order to augment crack-resistant dendrite of epitaxial growth. The overall supersaturation of liquid aluminum is crystallography-dependent. During across whole melt-pool solidification interface, supersaturation of nonsymmetric (001)/[110] welding configuration is not as small as symmetric (001)/[100] welding configuration under well-controlled heat input, thereby fosters the kinetic factors for stray grain development to obstruct columnar dendrite and consequently weaken unidirectional morphology. It is crystallographically favorable for relief of supersaturation with axis- symmetrical dendrite growth. The mechanism of crack-vulnerable dendrite growth elimination through circumspect improvement of supersaturation-controlled growth kinetics is constructively proposed for feasible crackless rejuvenation of laser welding or laser cladding. The theoretical predictions are scrupulously supported by corroborative metallograph observation.

Numerical Analysis of Microstructure Anomalies during Laser Welding Nickel-Based Single-Crystal Superalloy Part I: Salient Aluminum Redistribution Melioration

Correlation between welding conditions, such as laser power, welding speed and welding configuration, microstructure anomalies, including columnar/equiaxed transition (CET) and stray grain formation, and metallurgical factors, such as aluminum redistribution and supersaturation near dendrite tip, is elucidated by thorough numerical analysis to explain prevalent phenomenon of insidious microstructure development and face the challenge of microstructure amelioration as well as solidification cracking resistance improvement during course of ternary single-crystal Nickel-Chromium-Aluminum superalloy melt-pool solidification for crack-free laser surface modification. Metallurgical factors of γ gamma phase microstructure development strongly depend on welding configuration, and heat input is not as important as welding configuration. Although melted-pool center region is susceptible to microstructure anomalies, (001)/[100] welding configuration possesses auspicious growth crystallography under which the bimodal profiles of solid aluminum concentration and liquid aluminum supersaturation ahead of dendrite tip are symmetrically distributed to potentially decrease solute redistribution and increase resistibility to solidification cracking. Dissimilarly, (001)/[110] welding configuration possesses insidious growth crystallography under which the profiles of solid aluminum concentration and liquid aluminum supersaturation ahead of dendrite tip are asymmetrically distributed to preferably facilitate alloying plentiful enrichment and differentiate problematical microstructure instability on half side of molten pool. In the bottom of molten pool, beneficial Al-barren [001] dendrite is kinetically driven by homologous single-crystal epitaxial growth without columnar/equiaxed transition. On the right side of molten pool, detrimental Al-rich [100] dendrite is spontaneously susceptible to stray grain formation with equiaxed morphology. Symmetrical microstructure development is more enrichment-resistant than asymmetrical microstructure development, which is crystallographically ascribable to favorable thermo-metallurgical factors, i.e. aluminum redistribution mitigation and supersaturation relief, and substantially reduce metallurgical degradation and microstructure failure. The faster welding speed and the lower laser power are used, the smaller aluminum concentration and supersaturation ahead of dendrite tip are kinetically incurred to suppress columnar/equiaxed transition and stray grain formation with a number of thermometallurgical factors contribution to considerable microstructure amelioration and increasingly improve solidification cracking resistance and vice versa. Shallow molten-pool shape with symmetrical growth crystallography efficiently advances anomalies-resistant microstructure development with diminution of partition driving forces for solute redistribution and supersaturation during nonequilibrium solidification instead of deep molten-pool shape with asymmetrical growth crystallography. The latter importantly aggravates stray grain formation. Useful combination of optimum solidification conditions and favorable growth crystallography predominantly minimizes diffusion-controlled solute deviation and microstructure anomalies for excellent single-crystal superalloy laser processing without cracking, and possesses tenable relationship between welding conditions, solute redistribution and microstructure anomalies. The mechanism of crystallography-aided concentration fluctuation and copious supersaturation behind prominent phenomenon of microstructure anomalies, where nucleation and growth of stray grain formation near dendrite tip are activated, is consequently proposed. The comparison between numerical analyses and experiment results are valid and satisfactory. Microstructure anomalies are predictable for proper understanding of multicomponent microstructure development in the interior of fusion zone. The theoretical methodology is reproducible as consequence of availability of thermodynamic and kinetic properties of Nickel-based or Iron-based single-crystal superalloys.

Numerical Analysis of Microstructure Anomalies during Laser Welding Nickel-Based Single-Crystal Superalloy Part II: Favorable Dendrite Tip Undercooling

Two important thermometallurgical factors, i.e. aluminum redistribution and dendrite tip undercooling, are numerically analyzed to better understand growth kinetics of microstructure development with favorable and unfavorable crystallographic orientations in three dimensions during advancement of Ni-Cr-Al ternary single-crystal melt-pool solidification interface to optimize microstructure stability within gamma γ phase. Inappropriate growth crystallography dominates profiles of aluminum redistribution and undercooling of dendrite tip in the crack-susceptible region, simultaneously. For beneficial (001)/[100] growth crystallography, the profiles of solid aluminum concentration and undercooling ahead of dendrite tip are clearly symmetrical throughout solidification interface. For detrimental (001)/[110] growth crystallography, the profiles of solid aluminum concentration and undercooling ahead of dendrite tip are quite asymmetrical within two sides of weld, and this asymmetrical phenomenon is of particular interest. The same energy of heat input is accessible to each half of molten pool, however, the difference of dendrite growth driving forces between right side and left side of weld pool kinetically exacerbates microstructure development. The complexity of (001)/[110] welding configuration is consistently attributable to larger overall solid aluminum concentration and undercooling of dendrite tip in [100] dendrite region than that of [010] dendrite region. In the two welding configurations, the size and shape of [001] dendrite growth region modifies growth kinetics of dendrite tip to extend columnar morphology of epitaxial growth for crack-resistant microstructure development with smaller solid aluminum concentration and narrower dendrite tip undercooling by either decrease of laser power or further increase of welding speed, while [100] dendrite growth region preferentially aids columnar/equiaxed transition (CET) with severe aluminum redistribution and wider dendrite tip undercoolig. The smaller heat input is imposed, the smaller solid aluminum concentration and narrower dendrite tip undercooling are crystallographically induced that is capable of elimination of metallurgical contributing factors for microstructure anomalies and vice versa. Optimum (001)/[100] growth crystallography and low heat input with decrease of laser power and increase of welding speed minimize columnar/equiaxed transition and stray grain formation, improve resistance to solidification cracking and ameliorate weld integrity, while (001)/[110] growth crystallography and high heat input with increase of laser power and decrease of welding speed significantly contribute to weldability exacerbation and microstructure degradation. The crystallography-dependent mechanism of efficient microstructure anomalies reduction, which is attributed to decreasing aluminum enrichment and undercooling ahead of dendrite tip, is therefore proposed. Consequently, comparison between calculation results and experiment results is plausible and acceptable. The usefulness application of this numerical analysis improves predictive capability and enables attractive microstructure control of single-crystal superalloys with similar materials properties.

Friction welding: An effective joining process for hybrid additive manufacturing

• Linear Friction Welding (LFW) demonstrated for hybrid additive manufactured (AM) parts. • Microstructure evolution compared between conventional and AM parts. • Temperature history predicted by finite element models correlated well with the microstructure changes. • The effects of process parameters on metallurgical evolution have been explained. Hybrid additive manufacturing combining bulk components from traditional manufacturing route can overcome the size limitation in typical metal additive process. Investigating the joining process of bulk and additive components is crucial in hybrid processes. In the present work, a comprehensive study, including both experiments and simulations, has been carried out to describe the linear friction welding of electron beam melted Ti6Al4V. Three different welding configuration have been considered: conventional-conventional, EBMelted to EBMelted and the dissimilar conventional-EBMelted. Successive weld joints were achieved in all the three configurations. The mechanical behavior and the phase transformation in the weld region is highly influenced by the base material microstructure. The thermo mechanical behaviour during the friction welding is simulated using finite element method. The temperature history is predicted with very good accuracy in all the three configurations. The experimental data along with the simulation results are used to further explain and understand the phenomena occurring during the welding.