1064-nm Wavelength Research Articles

Increasing the electric field amplification in the metal-insulator-metal structure with a grating hybrid of bowtie nanotriangle and cylindrical nanodisc

In this paper, the strong electromagnetic coupling between an integrated grating of an array of periodic gold nanodiscs and an array of bowtie nanotriangles placed on layers of a dielectric and a metal has been investigated. The upper layer is periodically created by removing each nanodisk in the array of nanodisks and replacing it with bowtie nanotriangles. The structure for near field radiation with linear polarization at 800 nm wavelength is optimized so that it has the highest amount of amplification in the gap space between the tips of the nanotriangle with a minimum value of 188 times and a maximum of 320 times. The simulation results confirm that the huge field enhancement obtained is due to the strong coupling between the LSPR formed in the grating of bowties nano triangle and nanodiscs and the SPPs formed in the metal film. The amount of amplification compared to the array of only nanodiscs (about 32 times) or only bowtie nano triangles (about 120 times) is not only higher, but also the anti-crossing behavior is observed. The high amplification obtained at the mentioned wavelength can be used for laser oscillators with a central wavelength of 800 nm, such as titanium sapphire, etc., which has many applications in near-field physics, SERS, and ultrafast lasers.

Optoplasmonic tuneable response by femtosecond laser irradiation of glass with deep-implanted gold nanoparticles

The manipulation of the optical properties of plasmonic nanocomposites is of high interest for the development of advanced optical devices with tailored unique properties. Achieving these objectives requires a combination of synthesis techniques and post-fabrication strategies. Here, we combine the use of two well-established physical strategies: MeV ion implantation and femtosecond laser processing. Firstly, we synthesize Au-doped soda lime glass nanocomposite through ion beam implantation (Au2+ at 1.8 MeV) followed by thermal annealing. This synthesis procedure results in a peculiar optical response based on the combination of Au-nanoparticle plasmonic resonance and a Fabry-Perot interference, caused by the deep implantation (centered at 480 nm). Secondly, this dual response is demonstrated to be highly tuneable by non-resonant femtosecond laser irradiation (800-nm wavelength and 130-fs pulse duration). Depending on the laser fluence, three transformation regimes are distinguished: supressing the interferometric response by spallative ablation, inducing vivid blue colors by surface swelling, and producing red-shifted color changes by multi-shot irradiation at low fluences. The proposed method is very versatile, since it is applicable to any dielectric matrix or implanted element. This work paves the way to a new route for the development of scalable and tuneable nanocomposites with several potential applications in optics.

Above-Room-Temperature Ferroelectricity and Giant Second Harmonic Generation in 1D vdW NbOI3.

The realization of spontaneous ferroelectricity down to the one-dimensional (1D) limit is both fundamentally intriguing and practically appealing for high-density ferroelectric and nonlinear photonics. However, the 1D vdW ferroelectric materials are not discovered experimentally yet. Here, the first 1D vdW ferroelectric compound NbOI3 with a high Curie temperature TC>450K and giant second harmonic generation (SHG) is reported. The 1D crystalline chain structure of the NbOI3 is revealed by cryo-electron microscopy, whereas the 1D ferroelectric order originated from the Nb displacement along the Nb-O chain (b-axis) is confirmed via obvious electrical and ferroelectric hysteresis loops. Impressively, NbOI3 exhibits a giant SHG susceptibility up to 1572pmV-1 at a fundamental wavelength of 810nm, and a further enhanced SHG susceptibility of 5582pmV-1 under the applied hydrostatic pressure of 2.06GPa. Combing in situ pressure-dependent X-ray diffraction, Raman spectra measurements, and first-principles calculations, it is demonstrated that the O atoms shift along the Nb─O atomic chain under compression, which can lead to the increased Baur distortion of [NbO2I4] octahedra, and hence induces the enhancement of SHG. This work provides a 1D vdW ferroelectric system for developing novel ferroelectronic and photonic devices.

All-fiber miniature non-contact photoacoustic probe based on photoacoustic remote sensing microscopy for vascular imaging in vivo.

Photoacoustic (PA) remote sensing (PARS) microscopy represents a significant advancement by eliminating the need for traditional acoustic coupling media in PA microscopy (PAM), thereby broadening its potential applications. However, current PARS microscopy setups predominantly rely on free-space optical components, which can be cumbersome to implement and limit the scope of imaging applications. In this study, we develop an all-fiber miniature non-contact PA probe based on PARS microscopy, utilizing a 532-nm excitation wavelength, and showcase its effectiveness in in vivo vascular imaging. Our approach integrates various fiber-optic components, including a wavelength division multiplexer, a mode field adaptor, a fiber lens, and an optical circulator, to streamline the implementation of the PARS microscopy system. Additionally, we have successfully developed a miniature PA probe with a diameter of 4 mm. The efficacy of our imaging setup is demonstrated through in vivo imaging of mouse brain vessels. By introducing this all-fiber miniature PA probe, our work may open up new opportunities for non-contact PAM applications.

Resolving plasmon-mediated high-order multiphoton excitation pathways in dolmen nanostructures using ultrafast nonlinear optical interferometry.

The multiphoton excitation pathways of plasmonic nanorod assemblies are described. By using dolmen structures formed from the directed assembly of three gold nanorods, plasmon-mediated three-photon excitation is resolved. These high-order multiphoton excitation channels were accessed by resonantly exciting a hybrid mode of the dolmen structure that was resonant with the 800-nm carrier wavelength of an ultrafast laser system. Rotation of the exciting field polarization to a non-resonant configuration did not generate third-order responses. Hence, the multiphoton excitation and resultant non-equilibrium electron distributions were generated by structure- and mode-selective excitation. Correlation between high-order and resonant plasmon excitation was achieved through sub-cycle time-resolved interferometric detection of incoherent nonlinear emission signals. The results illustrate the advantages of nonlinear optical interferometry and Fourier analysis for distinguishing plasmon-mediated processes from those that do not require plasmon excitation.

Bone Regeneration of Rat Critical-Sized Calvarial Defects by the Combination of Photobiomodulation and Adipose-Derived Mesenchymal Stem Cells.

Introduction: This study explored the synergistic effects of low-level laser therapy (LLLT) and adipose-derived stem cells (ADSCs) on cranial bone regeneration in rats, addressing the limitations of autogenous grafts and advancing bone tissue engineering with innovative photobiomodulation (PBM) applications. Methods: Sixty Wistar rats were allocated to 5 separate groups randomly; (1) natural bovine bone mineral (NBBM); (2) NBBM+LLLT; (3) NBBM+allogenic ADSCs; (4) NBBM+allogenic ADSCs+LLLT; (5) Only defects. 8-mm calvarial defects were made in each rat in the surgical procedure. A diode laser was applied with the following parameters (continuous mode, power of 100mW, wavelength of 808nm, and 4 J/cm2 energy density) immediately after the procedure and every other day. Bone samples were obtained and assessed histomorphometrically and histologically after staining with hematoxylin and eosin (H&E). Results: Different volumes of bony material were observed in two weeks; 2.94%±1.00 in group 1, 5.1%±1.92 in group 2, 7.11%±2.82 in group 3, 7.34%±2.31 in group 4, and 2.01%±0.83 in group 5 (P<0.05). On the other hand, foreign body residuals were up by 23% in the groups with scaffolding by the end of 2 weeks. Four weeks of observation led to 6.74 %±1.95, 13.24%±1.98, 15.76%±1.19, 15.92%±3.4, and 3.11%±1.00 bone formation in groups 1 to 5, respectively (P<0.05). Generally, the difference between groups 2-4 was not statistically significant based on different types of bone and the extent of inflammation. Conclusion: Bearing in mind the limitations of our research, it was demonstrated that ADSCs in combination with PBM have promising effects on bone tissue regeneration in sizeable bony defects. Furthermore, this study also showed that PBM usage improved the newly regenerated bone quality.

Near-infrared imaging via upconversion in Er3+:CaF2 crystal with dual wavelength excitation.

We propose a system for imaging 1510 nm near-infrared (NIR) wavelength via upconversion (UC) luminescence in an Er3+-doped CaF2 crystal. Er3+ ions are excited from the ground to the excited state levels by an 800-nm pre-excitation wavelength, followed by the promotion of these ions to a higher energy level by the NIR excitation wavelength. Relaxation of these excited ions gives rise to 540 nm UC luminescence in the visible region, enabling the detection of the 1510 nm NIR wavelength. Using this UC scheme, 1510 nm was successfully imaged. Our system enables imaging of NIR wavelengths using low-cost optics and readily available Si-based detectors that are sensitive only to visible wavelengths, opening new possibilities for detection and imaging of NIR wavelengths.

Neodymium-doped yttrium aluminum garnet (Nd: YAG) laser treatment in ophthalmology: a review of the most common procedures Capsulotomy and Iridotomy.

Nowadays, lasers are used in various medical fields. Ophthalmology was the first medical specialty to utilize lasers in patient treatment and still remains the leading medical field that uses laser energy for both therapeutic and diagnostic purposes. The neodymium: yttrium-aluminum-garnet (Nd: YAG) laser is one of the most common lasers used in ophthalmology. It is a solid-state laser with a wavelength of 1064nm that works on the principle of photodisruption. Since its introduction in ophthalmology over 40 years ago, it has found various applications, mainly for procedures where cutting or disruption of ocular tissue is required. Compared to surgical alternatives, the use of Nd: YAG lasers on ocular tissue is minimally invasive. In this review, we focus on the two most common ophthalmic applications of Nd: YAG laser - laser peripheral iridotomy and posterior capsulotomy. The history of the techniques, current trends, potential complications, and the prognosis for future use is discussed.

Biosynthesis of gold nanoparticles by fungi and its potential in SERS.

Surface enhanced Raman spectroscopy (SERS) by using gold nanoparticles (AuNPs) has gained relevance for the identification of biomolecules and some cancer cells. Searching for greener NPs synthesis alternatives, we evaluated the SERS properties of AuNPs produced by using different filamentous fungi. The AuNPs were synthesized utilizing the supernatant of Botrytis cinerea, Trichoderma atroviride, Trichoderma asperellum, Alternaria sp. and Ganoderma sessile. The AuNPs were characterized by ultraviolet-visible spectroscopy (UV-Vis) to identify its characteristic surface plasmon resonance, which was located at 545nm (B. cinerea), 550nm (T. atroviride), 540nm (T. asperellum), 530nm (Alternaria sp.), and 525nm (G. sessile). Morphology, size and crystal structure were characterized through transmission electron microscopy (TEM); colloidal stability was assessed by Z-potential measurements. We found that, under specific incubation conditions, it was possible to obtain AuNPs with spherical and quasi-spherical shapes, which mean size range depends on the fungal species supernatant with 92.9nm (B. cinerea), 24.7nm (T. atroviride), 16.4nm (T. asperellum), 9.5nm (Alternaria sp.), and 13.6nm (G. sessile). This, as it can be expected, has an effect on Raman amplification. A micro-Raman spectroscopy system operated at a wavelength of 532nm was used for the evaluation of the SERS features of the AuNPs. We chose methylene blue as our target molecule since it has been widely used for such a purpose in the literature. Our results show that AuNPs synthesized with the supernatant of T. atroviride, T. asperellum and Alternaria sp. produce the stronger SERS effect, with enhancement factor (EF) of 20.9, 28.8 and 35.46, respectively. These results are promising and could serve as the base line for the development of biosensors through a facile, simple, and low-cost green alternative.

Comparison between contact diode laser with 980 nm and 1470 nm wavelengths for posterior laryngofissure in pigs

To compare two different wavelengths of the surgical contact diode laser (CDL) for producing a posterior laryngofissure in in-vivo pigs. Anesthetized pigs underwent a tracheostomy and an anterior laryngofissure through a cervicotomy. They were randomly selected for the CDL wavelength and Power, according to the peak of Power set at device (980nm wavelength: Ppeak power of 10 W, 15 W, and 20 W, or 1470 nm wavelength: Ppeak 3 W, 5 W, 7 W, 10 W). At the end of the experiment, the laryngotracheal specimen was extracted and sent for histology and morphometry measurements (incision size, depth, area, and lateral thermal damage). Hemodynamic data and arterial blood gases were recorded during the incisions. Statistical analysis of the comparisons between the parameters and groups had a level of significance of p < 0.05. Twenty-six pigs were divided into CDL 980 nm (n = 11) and 1470 nm (n = 15). There was a greater incision area at the thyroid level in the 980 nm CDL and a wider incision at the trachea level, with a larger distance between mucosa borders. There were no significant differences in the area of lateral thermal damage between the two groups and neither difference among the power levels tested. Both wavelengths tested showed similar results in the various combinations of power levels without significant differences in the lateral thermal damage. The posterior laryngofissure incision can be performed by either of the wavelengths at low and medium power levels without great difference on lateral thermal damage.

Bio-thermal response during laser haemorrhoidoplasty: an exclusive analytical and numerical approach for theoretical investigation.

Haemorrhoidal disease is identified by declension of the inflamed and bleeding of vascular tissues of the anal canal. Traditionally, haemorrhoids are associated with chronicconstipation and the most common symptoms are irritation in anus region, pain and discomfort, swelling around anus, tender lumps around the anus and rectal bleeding (depending upon the grade of haemorrhoid). Among the several conventional treatment procedures (commonly mentioned as, rubber band litigation, sclerotherapy and electrotherapy), laser haemorrhoidoplasty is an out-patient and less-invasive laparoscopic procedure. From literature survey it has been observed that an exclusive theoretical model depicting the impact of 1064nm wavelength laser wave on living tissues subjected to haemorrhoid therapy is not available. This research work is a pioneering attempt to develop a theoretical study attributing specifically on laser therapy of haemorrhoid treatment based on Pennes' biological heat transfer model. The corresponding mathematical model has been solved by analytical method to establish thermal response of tissue during the treatment and also the same has been solved a numerical approach based on finite difference method to validate the feasibility of former method due to unavailability of any theoretical model. Impact of variation of blood perfusion term, laser pulse time and optical penetration depth on temperature response of skin tissue is captured. The tissue temperature decreases along with time of laser exposure with increasing the blood perfusion rate as it carries away large amount of heat. With the increase in laser pulse time, tissue temperature declines due to shorter pulse time resulting in higher energy consumed by electrons. The research outcome is successfully validated with less than 1% of error observed between the appointed analytical and numerical scheme.

UV Laser Copper Pad Surface Exposure for Laser Direct Structuring (LDS) of Interconnection

Microelectronics market demands strong miniaturization and high-quality packages solutions; therefore, companies and researchers start thinking about alternative methods to create more flexible and performing interconnections which are able to reduce package dimensions. Laser direct structuring (LDS) technology creates a conductive pattern on MID (Moulded Interconnected Device) with the combination of laser layout structuring and electroplating bath. LDS can be applied to leadframe based IC packages to realize interconnections in alternative to standard wires connection. Feasibility study on copper (Cu) pad covered by moulding compound is conducted varying laser parameters as power, frequency and scanning speed to obtain a 80μm diameter via on die. Die via is connected through a trace with a 200μm diameter via on lead to realize the interconnection path, filled with copper after plating process. UV 355nm wavelength laser is used to obtain a complete exposition of Cu surface without silicon damage. Visual inspection with optical microscope and SEM analysis method are performed to evaluate the integrity of metal pads and interconnection layout.

Numerical analysis of on-chip acousto-optic modulators for visible wavelengths.

On-chip acousto-optic modulators that operate at an optical wavelength of 780nm and a microwave frequency of 6.835GHz are proposed. The modulators are based on a lithium-niobate-on-sapphire platform and efficiently excite surface acoustic waves and exhibit strong interactions with tightly confined optical modes in waveguides. In particular, a high-efficiency phase modulator and single-sideband mode converter are designed. We found that for both microwave and optical wavelengths below 1µm, the interactions at the cross-sections of photonic waveguides are sensitive to the waveguide width and are significantly different from those in previous studies. Our designed devices have small footprints and high efficiencies, making them suitable for controlling rubidium atoms and realizing hybrid photonic-atomic chips. Furthermore, our devices have the potential to extend the acousto-optic modulators to other visible wavelengths for other atom transitions and for visible light applications, including imaging and sensing.

Viability Test of Hydroxyapatite Tooth Graft on Osteoblast cell culture

Surgery is required to restore bone loss brought on by regenerative periodontal diseases while retaining the patient's aesthetics. The bone deficits caused by periodontal disease have been repaired using a variety of transplant materials. One of the graft materials used is dentin since it resembles bone in terms of both organic and inorganic components. In order to evaluate the viability of dental grafts, this study intended to count the osteoblast cells that were still alive after a specific therapy. Osteoblast cell cultures in 42 well plates were employed in this work. The 42 well plate cell cultures were separated into seven groups for 24hour examinations and seven groups for 48 hour examinations in order to examine the cells using the MTT assay. Each group contained control cells, control media devoid of cells, and the treatment group, which received tooth transplant at doses of 8, 4, 2, 1, and 0.5mg/mL. Using an ELISA reader with a 595nm wavelength, the optical density of these cells was used to determine the viability of the cells. There are more than 50% of osteoblast cells in all concentrations, which is indicated by the number of these cells. The Shapiro-Wilk, Levene, and Oneway Anova tests were performed to assess the normality, uniformity, and degree of group differences in the data. This study demonstrates the biocompatibility of the tooth graft and the osteoblast cells.

Ozone and Laser Effects on Dentin Hypersensitivity Treatment: A Randomized Clinical Study

IntroductionThe aim of this study was to evaluate and compare the clinical efficacy of diode laser and ozone gas in the treatment of dentin hypersensitivity (DHS). MethodsOne hundred thirty-two teeth from 44 patients with moderate DHS were randomized into 3 groups according to a split-mouth design. In the diode laser group, the operator irradiated the superficial dentin exposed with an 808-nm wavelength and incremental power from 0.2 to 0.6 W with a 20-second interval. In the ozone gas group, the operator applied a high dose of ozone (32 g/m3) for 30 seconds using a silicon cup. In the placebo group, no therapy was applied. The dentin sensitivity level was evaluated upon enrollment (T0), immediately after treatment (T1), 3 months post-treatment (T2), and 6 months post-treatment (T3) with a cold air blast challenge and tactile stimuli. The pain severity was quantified according to the visual analogue scale. The Wilcoxon signed rank test was used to scrutinize potential statistical disparities among the treatments. Statistical significance was predetermined at P < .05. ResultsA significant decrease of DHS was observed in the ozone gas group and the `diode laser group immediately after treatment and after 3 and 6 months of the therapy. After 6 months from the therapy, the sensitivity values in the teeth treated with ozone gas remained statistically lower than those treated with diode lasers (P < .05). ConclusionsA laser diode and ozone gas are both efficient as dentin sensitivity treatment. Ozone maintains an invariable effectiveness after 6 months.

Analysis of misaligned optics effects on beam pointing stability in dual-pass optical system

The high-power laser device utilizes a multi-pass amplification system to achieve elevated power laser output. Laser beam is transmitted several times through the amplifier, and the pointing stability is a critical factor affecting the efficiency of the system. Any perturbation of the optics during laser transmission can cause misalignment and further lead to beam pointing errors. Laser beam propagation simulation was conducted using the ray tracing method. Equivalent experiment was performed using a laser with a wavelength of 532 nm, and the centroid position data of the laser beam were collected to characterize the effect of the optics misalignment on laser pointing. A model evaluating the sensitivity of the optics was constructed, and the analysis of how various optics impact pointing accuracy was conducted. Results indicate that, a linear relationship exists between the misalignment of the optic and the pointing shift and angular deviation of the beam when a single optic is misaligned. If multiple optics are misaligned, the shift in centroid position of the laser beam can be calculated by adding up the shifts caused by each misaligned optic. Furthermore, the shift in the centroid position of the laser beam is the linear superposition of the misalignment of each optic.

Experimental study and mechanism analysis of a pulsed laser cleaning aluminum alloy process.

A pulse laser with a wavelength of 1064nm and a pulse width of 1µs was used to experiment on the coating of a 2024 aluminum alloy surface. The removal performance of the pulse laser cleaning coating was explored by a single factor analysis and orthogonally conditions, and the effects of the laser power, scanning speed, and pulse frequency on the quality of laser coating removal were summarized. The mechanisms of pulse laser cleaning the coating were studied. The results show that the three parameters of the laser power, scanning speed, and pulse frequency have different effects on the quality of laser coating removal. Among them, with the increase of the scanning speed and pulse frequency, the quality of laser cleaning first increases and then decreases, respectively. With the increase in laser power, the quality of laser cleaning increases. A good laser cleaning quality can be achieved at the laser power of 16.5W, a scanning speed of 600mm/s, and a pulse frequency of 30kHz. The laser cleaning coating involves a variety of mechanisms such as combustion, explosion, gasification, thermal vibration stripping, and laser plasma impact. The result can provide practical references for a better searching of the paint removal.

Photobiomodulation increases brain metabolic activity through a combination of 810 and 660 wavelengths: a comparative study in male and female rats

Photobiomodulation (PBM), an emerging and non-invasive intervention, has been shown to benefit the nervous system by modifying the mitochondrial cytochrome c-oxidase (CCO) enzyme, which has red (620–680 nm) or infrared (760–825 nm) spectral absorption peaks. The effect of a single 810-nm wavelength with a combination of 810 nm and 660 nm lights in the brain metabolic activity of male and female rats was compared. PBM, with a wavelength of 810 nm and a combination of 810 nm and 660 nm, was applied for 5 days on the prefrontal cortex. Then, brain metabolic activity in the prefrontal area, hippocampus, retrosplenial, and parietal cortex was explored. Sex differences were found in cortical and subcortical regions, indicating higher male brain oxidative metabolism, regardless of treatment. CCO activity in the cingulate and prelimbic area, dentate gyrus, retrosplenial and parietal cortex was enhanced in both treatments (810 + 660 nm and 810 nm). Moreover, using the combination of waves, CCO increased in the infralimbic area, and in CA1 and CA3 of the hippocampus. Thus, employment of a single NIR treatment or a combination of red to NIR treatment led to slight differences in CCO activity across the limbic system, suggesting that a combination of lights of the spectrum may be relevant.

CF-LIBS based elemental analysis of Saussurea simpsoniana medicinal plant: a study on roots, seeds, and leaves.

The plant Saussurea Simpsoniana, which has been used in traditional medicine for its biocompatibility and abundant nutrients, offers a wide range of remedies. Local communities effectively utilize medicines derived from the plant's roots to treat various ailments such as bronchitis, rheumatic pain, and abdominal and nervous disorders. In this study, we present an elemental analysis of the chemical composition (wt%) of this medicinal plant using the laser-induced breakdown spectroscopy (LIBS) technique. In the air atmosphere, an Nd:YAG (Q-switched) laser operating at a wavelength of 532nm is utilized to create plasma on the sample's surface. This laser has a maximum pulse energy of approximately 400mJ and a pulse duration of 5ns. A set of six miniature spectrometers, covering the wavelength range of 220-970nm, was utilized to capture and record the optical emissions emitted by the plasma. The qualitative analysis of LIBS revealed the presence of 13 major and minor elements, including Al, Ba, C, Ca, Fe, H, K, Li, Mg, Na, Si, Sr, and Ti. Quantitative analysis was performed using calibration-free laser-induced breakdown spectroscopy (CF-LIBS), ensuring local thermodynamical equilibrium (LTE) and optically thin plasma condition by considering plasma excitation temperature and electron number density. In addition, a comparison was made between the results obtained from CF-LIBS and those acquired through energy-dispersive X-ray spectroscopy (EDX) analysis.

Laser fragmentation of amorphous and crystalline selenium of various morphologies and assessment of their antioxidant and protection properties.

Introduction: The process of laser-induced breakdown of amorphous and crystalline selenium nanoparticles (Se NPs) of various shapes during nanosecond laser fragmentation of aqueous colloidal solutions of nanoparticles with different concentrations has been studied. Methods: The methods of studying the characteristics of plasma and acoustic oscillations induced by optical breakdown are applied. The methods of assessing the concentration of hydrogen peroxide and hydroxyl radicals, the amount of long-lived reactive species of protein and 8-oxoguanine are applied. Results: It has been established that in the process of laser fragmentation of selenium nanoparticles at a wavelength of 532nm, corresponding to the maximum absorption of selenium, the highest probability of breakdown, the number of plasma flashes, their luminosity and the amplitude of acoustic signals are achieved at concentrations of the order of 109NPs/mL. It has been shown that the use of selenium nanoparticles of various shapes and structures leads to a change in the photoacoustic signal during laser-induced breakdown. When crystalline selenium nanoparticles are irradiated, the intensity of the photoacoustic response during breakdown turns out to be greater (1.5 times for flash luminosity and 3 times for acoustics) than when amorphous particles are irradiated at the same concentration. It has been shown that selenium nanoparticles exhibit significant antioxidant properties. Selenium nanoparticles effectively prevent the formation of reactive oxygen species (ROS) during water radiolysis, eliminate radiation-induced long-lived reactive species of protein, and reduce the radiation-chemical yield of a key marker of oxidative DNA damage - 8-oxoguanine. Discussion: In general, the intensity of processes occurring during laser fragmentation of amorphous and crystalline selenium nanoparticles differs significantly. The antioxidant properties are more pronounced in amorphous selenium nanoparticles compared to crystalline selenium nanoparticles.