Water Solvent Retention Capacity Research Articles

Effect of Genotype and Environment on Food-Related Traits of Organic Winter Naked Barleys.

This study aimed to understand how genetics and environment influence organic winter naked barley composition and functionality, and to identify traits that might effectively categorize basic physicochemical functionality of food barley. Across three years, two locations, and 15 genotypes, genotype significantly influenced all 10 food-related traits and was the dominant influence for three. Location significantly influenced eight traits and was dominant for three. Year significantly influenced all traits but was dominant only for one. Of the interactions location * year was the most influential and was the dominant effect for two traits. For all interaction terms where genotype was a component, the effect sizes were either small or non-significant suggesting that even with low leverage traits there is the potential for genetic gain by observing trait rankings across environments. Principal component analysis identified six traits that could serve to categorize basic physicochemical functionality of food barley. These were grain protein content, beta-glucan content, flour-water batter flow, water solvent retention capacity, time to peak viscosity of cooked flour, and hardness of cooked intact grains.

Premature Termination Codon of 1Dy12 Gene Improves Cookie Quality in Ningmai9 Wheat.

The area between middle and lower reaches of the Yangtze River is the largest region for soft wheat production in China. In soft wheat breeding, the lack of germplasm with desirable quality for end-use products is a barrier. Ningmai9 is the main variety of soft wheat planted in this area. To create germplasm with better quality and yield potential than Ningmai9, mutants of HMW-GSs in Ningmai9 induced by ethylmethanesulfonate (EMS) were obtained. SDS-PAGE showed that two mutants, md10 and md11, were HMW-GS 1Dy deletions. DNA sequencing confirmed that one mutation was caused by a C/T substitution, resulting in the change of CAA encoding glutamine into the termination codon TAA, and another mutation was due to a G/A substitution in the central repetitive domain of the coding region, causing TGG encoding tryptophan to become the termination codon TGA. The premature termination codon of the 1Dy12 gene affected the expression of 1Dy12 and kept the mRNA at a lower transcription level during the kernel development stage in comparison with the wild type. HMW-GS 1Dy12 deletion mutants decreased the content of HMW-GSs and glutenin macropolymers, mixograph envelope peak time and TIMEX width, water solvent retention capacity (WSRC), and lactic acid solvent retention capacity (LASRC). In the HMW-GS 1Dy12 deletion lines, the sugar-snap cookie diameter was 8.70–8.74 cm, which was significantly larger than that in the wild type of 8.0 cm. There were no significant differences in spike number, kernel number, thousand kernel weight, and yield between the deletion lines and wild type. Overall, the study indicated that the knockout of the HMW-GS gene induced by EMS is an effective way to improve wheat quality, and deletion mutants of HMW-GS 1Dy12 decrease gluten strength and increase sugar snap cookie diameter without yield penalty in Ningmai9 wheat.

Analytical composition of flours through thermogravimetric and rheological combined methods

The suitability of thermogravimetric analysis (TGA) and rheology for predicting analytical composition of flour was verified. The percentage weight loss of flour samples in different temperature ranges and their analytical composition determined following the American Association of Cereal Chemists (AACC) approved methods were correlated. The moisture content determined by AACC method showed a strong correlation with the weight loss of dried samples in the temperature range 30 – 125°C. Similarly, the weight loss of fully swollen samples, determined by TGA in the temperature range of 30 – 125°C, perfectly correlated with the water-Solvent Retention Capacity (w-SRC) determined by standard method (AACC). The weight loss in the range 200 – 400°C revealed a good correlation with the starch content, while the weight loss in the range 400 – 600°C correlated with the gluten content. Finally, the so-called residue at 600°C (usually attributable to mineral content) correlated with the ash content (AACC standard method). The rheological parameters (G', G'' and tan δ) also showed a strong correlation with the analytical composition of analyzed flours. A perfect correlation was observed between the mineral content and the elastic modulus, as well as between both G' and G'' and the starch content. As the resilience of dough samples strongly depends on the relative amount of gliadins and glutenins, a strong correlation between the Gli/Glu ratio and tan δ was also found.

The Characteristics of Steamed Bread from Reconstituted Whole Wheat Flour (WWF) of Different Hard Wheat Classes with Different Bran Particle Size Distributions.

The purpose of this study was to investigate the effects of reconstituted whole wheat flour (WWF) particle size on flour characteristics and northern-type steamed bread (NTSB) quality. In this study, hard white (HW), hard red winter (HRW), and hard red spring (HRS) wheat classes, and four different bran particle size distributions [D(50) values of 53 μm, 74 μm, 105 μm, and 125 μm] were blended at a ratio of 85% refined flour + 15% bran to create reconstituted WWF and make reconstituted WWF NTSB. Farinograph water absorption and water solvent retention capacity (SRC) increased as bran particle size decreased. Flour and dough strength tests such as lactic acid SRC and Farinograph and Mixolab development time and stability did not show any clear trends with bran particle size. HRW WWF tended to be the exception as Farinograph development time and stability generally increased as particle size increased. Resistance to extension increased as bran particle size decreased for HRW WWF and increased as particle size increased for HW and HRS. These differences in WWF dough rheology trends were likely due to differences in gluten characteristics between the classes. The results showed that larger particle sizes (105 μm and 125 μm) were more conducive to achieving desirable whole wheat NTSB specific volume, color, and texture.

Potential application of enzymes to improve quality of dry noodles by reducing water absorption of inferior-quality flour.

This study has investigated the characteristics of dry noodles made with Korean domestic wheat flours using enzyme treatment for reducing water absorption to improve noodle-making performance. The water solvent retention capacity (SRC) values of flour treated with α-amylase and xylanase significantly decreased with increasing enzyme concentrations up to 0.025% (flour weight basis), which confirmed the enzyme effect on reducing the water absorption capacity of damaged starches and arabinoxylans. Enzyme-treated cooked noodles showed changes in textural characteristics, depended on the enzyme type, water amount, and drying method. Applying α-amylase for reducing the water absorption capacity of flour could mitigate the issue of inferior dry-noodle-making performance. Sensory evaluation showed improved preference attributes of cooked noodles with α-amylase treatment. In conclusion, the α-amylase application could improve the quality of dry-noodle made of Korean domestic wheat flour by diminishing the undesirable effect of damaged starch in flour related to noodle quality.

Relationships of flour characteristics with Isolated Starch Properties in Different Chinese Wheat Varieties

Flour and isolated total starch granules (TS), A-type starch granules (AS), and B-type starch granules (BS) characteristics as well as their relationships were evaluated. Flour from varieties with higher grain hardness index (GHI) exhibited higher damaged starch content, SDS-sedimentation values (SDS), and water SRC (W-SRC). GHI showed a negative correlation with breakdown viscosity (BDV) and swelling power of TS while positive with solubility of BS. BS from varieties with higher hardness showed lower pasting viscosity compared to that from lower hardness. Damaged starch, W-SRC, Sucrose SRC (S-SRC), water absorption, and extensional resistance of flour showed a negative correlation with AS content. Protein content, SDS, curve area, and extensional resistance of flour showed a negative correlation with BDV and setback viscosity (SV) of TS. Damage starch, W-SRC, and S-SRC of flour showed a positive correlation with pasting viscosities and solubility of BS while negative with swelling power of TS and AS. Pasting properties of flour showed a positive correlation with BDV, SV, and gel hardness of BS while negative with solubility, gel springiness, and cohesiveness of BS. The results demonstrated wheat flour and starch characteristics were related to grain texture, furthermore, starch granule size affected flour functionality and end-use quality.

Effects of superheated steam treatment of wheat on physicochemical properties of wheat flour and cracker quality

In order to study the effects of superheated steam (SS) treatment of wheat on the physicochemical properties of wheat flour and cracker quality, soft wheat was treated with SS and the pasting properties and solvent retention capacity (SRC) of wheat flour and cracker quality were determined. The results showed that both the physicochemical properties of wheat flour and cracker quality were significantly affected by SS treatment of wheat. Pasting properties of wheat flour were affected by SS treatment of wheat significantly, which indicated the increase of gelatinized starch and damaged starch. At the steam temperatures from 140 to 215 °C, 50% sucrose SRC (SuSRC), 5% sodium carbonate SRC (SCSRC), and water SRC (WSRC) increased with the extending of treatment time. Meanwhile, 5% lactic acid SRC (LASRC) and gluten performance index (GPI) initially increased and then decreased. Besides, the spread ratio, hardness and fracturability of crackers were improved. According to the results above, we concluded that SS treatment of wheat had significant effects on the physicochemical properties of wheat flour and could improve cracker quality in a relatively short time (shorter than 3 min). The most suitable condition for improving cracker quality was SS treatment of wheat at 165 °C for 3 min.

Physicochemical and rheological properties of the derivatives of Ningmai 9 wheat and their relationship with sugar-snap cookie diameter

In recent years, the annual demand for soft wheat in China has exceeded six million metric tons. The development of soft wheat is an important objective in the Yangtze River Basin winter wheat region in China. Ningmai 9 is a soft wheat cultivar widely used as a parent in the soft red winter wheat breeding program. However, the physicochemical and rheological properties of Ningmai 9 and its derivatives remain unknown. In this study, Ningmai 9 and its thirty-one derivatives were grown in Nanjing in Jiangsu Province in two successive cropping seasons from 2015 to 2017. The kernel samples were analyzed for milling quality, solvent retention capacity (SRC), alveograph parameters, and sugar-snap cookie diameter. The flour protein content was not significantly associated with any other quality trait. P, L, P/L (the ratio of tenacity to extensibility), alveograph deformation work (W), and four types of SRC were significantly correlated with sugar-snap cookie diameter. Compared to Ningmai 9, seven wheat genotypes had relatively better cookie quality and lower SRC and P values. A multiple regression model with water SRC (WSRC) as a variable explained 72.5% of the total variation in cookie diameter. These results suggest that decreasing SRC and gluten strength is the key to improving soft wheat breeding programs.

Incorporation of carrot pomace powder in wheat flour: effect on flour, dough and cookie characteristics.

Carrot pomace powder (CPP) of 72 and 120 mesh sizes was incorporated in wheat flour at 10, 15 and 20% level and its impact on flour, dough and cookie characteristics was evaluated. Protein content of the flour blends (8.84-7.88%) decreased and fibre content (4.63-6.68%) increased upon blending of CPP in wheat flour. Wheat flour containing 120 mesh CPP showed better functional properties [water absorption (1.16-1.47%), oil absorption (1.11-1.39%), solubility index (41-50%) and swelling power (1.34-1.39)] than those containing 72 mesh. Water solvent retention capacity and sucrose solvent retention capacity increased while lactic acid solvent retention capacity and sodium carbonate solvent retention capacity decreased with blending of CPP. Water absorption, dough development time and degree of softening increased whereas, dough stability and mixing tolerance decreased with increasing CPP. The highest decrease in pasting was observed flour containing 72 mesh CPP. Rheology of dough containing 120 mesh CPP closely resembled the control. Color of flour and cookies increased with blending of CPP irrespective of mesh size. Antioxidant activity of cookies was higher than the flour blends. The cookies containing CPP of 72 mesh showed the lowest hardness. However, cookies containing CPP of 120 mesh showed the best sensory properties. Incorporation of 120 mesh CPP produced low gluten cookies with manageable flour and dough characteristics and better antioxidant and sensory properties.

Physicochemical and Rheological Properties of Chinese Soft Wheat Flours and Their Relationships with Cookie‐Making Quality

ABSTRACTThe relationship of solvent retention capacity (SRC) values with four solvents, alveograph and farinograph properties, and cookie‐baking performance was evaluated with 20 Chinese soft wheat genotypes, including four cultivars and 16 advanced lines grown in the 2009–2010 season. Significant positive correlations were observed between water SRC (WSRC), sodium carbonate SRC (SOSRC), lactic acid SRC, and sucrose SRC (SUSRC) values. WSRC, SUSRC, and SOSRC showed significant positive correlations with farinograph water absorption (WA), alveograph P (tenacity), and P/L (ratio of tenacity to extensibility). Cookie diameter was significantly correlated with wet gluten (r = –0.491, P < 0.05), WSRC (r = –0.882, P < 0.001), SUSRC (r = –0.620, P < 0.01), SOSRC (r = –0.712, P < 0.001), P (r = –0.787, P < 0.001), L (r = 0.616, P < 0.01), P/L (r = –0.766, P < 0.001) and WA (r = –0.620, P < 0.01), respectively. SRC values were effective predictors of cookie quality in Chinese soft wheat. Alveograph parameters were more closely correlated to cookie quality than were farinograph parameters.