Water-soluble Material Research Articles

Inherent Water Competition Effect-Enabled Colloidal Electrode for Ultra-stable Aqueous Zn-I Batteries.

Electrode material stability is crucial for the development of next-generation ultralong-lifetime batteries. However, current solid- and liquid-state electrode materials face challenges such as rigid atomic structure collapse and uncontrolled species migration, respectively, which contradict the theoretical requirements for ultralong operation lifetimes. Herein, we present a design concept for a soft colloid polyvinylpyrrolidone iodine (PVP-I) electrode, leveraging the inherent water molecule competition effect between (SO4)2- from the electrolyte and PVP-I from the cathode in an aqueous Zn||PVP-I battery. Electrochemical demonstrations measured under various simulated and practical (integrated with photovoltaic solar panel) conditions highlight the potential for an ultralong battery lifetime. The PVP-I colloid exhibits a dynamic response to the electric field during battery operation. More importantly, the water competition effect between (SO4)2- from the electrolyte and water-soluble polymer cathode materials establishes a new electrolyte/cathode interfacial design platform for advancing ultralong-lifetime aqueous batteries.

Preparation and Characterization of Universal Liquid Proliposomes Encapsulating Water-soluble Efficacious Substances.

Liposomes were extensively used for cosmetics and pharmaceuticals due to their versatility, biocompatibility, and biodegradability, as well as the ability to encapsulate water-soluble and fat-soluble substances. However, some challenges remain unsolved, including poor stability, complex preparation process, limited encapsulation efficiencies (EE%) and drug loading capacity (DLC%). We herein prepared universal liquid proliposomes by rotary evaporation method and optimized formulations with different pH, glycerol content, ethanol content and preparation process. The EE% of water-soluble substances was above 85%, and the maximum DLC% was 37.5%. In 7 different conditions, the optimal formulation of the proliposomes remained stable over 60 days. The excellent stability of proliposomes and nicotinamide liposomes and their essence, when applied to cosmetic formulations, was confirmed by the Turbiscan stability analyzer. The proposed universal liquid proliposomes can form liposomes encapsulating a variety of water-soluble substances rapidly, making them an accessible and versatile tool for improving the stability and applicability of water-soluble raw materials.

Enabling robust near-infrared afterglow polymers through cascade energy transfer

Near-infrared afterglow materials, which can significantly reduce background fluorescence and improve penetration in living organisms, are vital for precision imaging. However, the practicability of near-infrared afterglow materials has been hindered by their short lifetime and low luminescence quantum efficiency. Herein, we propose an effective strategy for doping water-soluble afterglow polymer host materials with fluorescent dyes, leveraging the step-by-step Förster energy transfer principle to realize near-infrared afterglow. Benefiting from the ultralong lifetime of 4.2 s and high quantum efficiency of 20.1 % for the blue host PAMCz as well as efficient cascade energy transfer efficiency of 83.3 %, the developed NIR afterglow exhibits luminescence peaked at 750 nm, a lifetime of 1.4 s, and a quantum efficiency of 17.1 %. A successful demonstration of near-infrared afterglow biological imaging with a penetration depth of 3.4 mm and signal-to-background ratio of 48.3, has been established. These advancements expand the scope of near-infrared afterglow materials by combining an ultralong lifetime with high quantum efficiency, providing a roadmap for designing robust near-infrared materials.

Embedding of Liquids into Water-Soluble Materials via Additive Manufacturing for Timed Release

Embedding of Liquids into Water-Soluble Materials via Additive Manufacturing for Timed Release

Replication of soil analogues at the original scale by 3D printing: Quantitative assessment of accuracy and repeatability of the pore structural heterogeneity

The present study investigates the quality of four three-dimensional (3D) printing technologies to accurately reproduce the complex pore structure of a real undisturbed soil sample for laboratory experiments of transport in porous media at a 1:1 scale. Four state-of-the-art 3D printing technologies were evaluated (digital light synthesis, PolyJet with gel support material, low-force stereolithography, and PolyJet with water-soluble support material) using a combination of 3D image analysis from microtomopraphy and flow simulations of the pore structure produced with each 3D printing technique. Accuracy, as determined by matching solid and void volumes, permeability, connected porosity, specific surface area, and pore size distribution of the print against the original digital soil structure, was found to be substantially better for digital light synthesis, as compared to the other tested technologies. Repeatability, as determined by the same metrics but compared between identical prints, was found to be comparable across all printing technologies and did not significantly improve for prints at greater magnification (1.5×). Wettability of the samples was improved by plasma treatment of the prints. The thorough analysis herein presented demonstrates that advanced, yet relatively inexpensive 3D printing approaches can be used to generate real-scale high quality analogs of soils/rocks that are much needed for experimental laboratory work. Such a method can open countless opportunities for studying the coupling of pore-structure and hydrodynamics on reactive mass transport in environmental science and engineering, soil science, and other subsurface related fields.

Establishment of nanoparticle screening technique: A pivotal role of sodium carboxymethylcellulose in enhancing oral bioavailability of poorly water-soluble aceclofenac

A novel nanoparticle screening technique was established to mostly enhance the aqueous solubility and oral bioavailability of aceclofenac using nanoparticle systems. Among the polymers investigated, sodium carboxymethylcellulose (Na-CMC) showed the greatest increase in drug solubility. Utilizing spray-drying technique, the solvent-evaporated solid dispersion (SESD), surface-attached solid dispersion (SASD), and solvent-wetted solid dispersion (SWSD) were prepared using aceclofenac and Na-CMC at a weight ratio of 1:1 in 50 % ethanol, distilled water, and ethanol, respectively. Using Na-CMC as a solid carrier, an aceclofenac-loaded liquid self-emulsifying drug delivery system was spray-dried and fluid-bed granulated together with microcrystalline cellulose, producing a solid self-nanoemulsifying drug delivery system (SNEDDS) and solid self-nanoemulsifying granule system (SNEGS), respectively. Their physicochemical properties and preclinical assessments in rats were performed. All nanoparticles exhibited very different properties, including morphology, crystallinity, and size. As a result, they significantly enhanced the solubility, dissolution, and oral bioavailability in the following order: SNEDDS ≥ SNEGS > SESD ≥ SASD ≥ SWSD. Based on our screening technique, the SNEDDS was selected as the optimal nanoparticle with the highest bioavailability of aceclofenac. Thus, our nanoparticle screening technique should be an excellent guideline for solubilization research to improve the solubility and bioavailability of many poorly water-soluble bioactive materials.

Water-soluble biodegradable polyesters with pH and ionic responsivity

The synthesis of novel water-soluble polymers with biodegradability is an effective way to mitigate their negative environmental impacts. In this study, semi-aromatic copolyester poly(butylene succinate-co-butylene terephthalate) (PBST) with exceptional biodegradability is used as the resin matrix. Anionic sodium 1–3-isophthalate-5-sulfonate (SIPA) is introduced as a fourth monomer to prepare random poly(butylene succinate-co-butylene terephthalate-co-butylene 5-sodiosulfoisophthalate) (PBSTS) copolyesters by melt copolymerization. The incorporation of ionic groups enhances the hydrophilicity and water absorption of the copolyesters, resulting in water-soluble materials that exhibit ionic and temperature responsivity. Furthermore, the ionized biodegradable copolyesters demonstrate distinct pH-dependent degradation, which is accelerated at pH = 5.5 and 8.5 but inhibited at pH = 7.2. Degradation assessments in simulated body fluids reveal that the PBSTS copolyesters exhibit significant degradation in gastric fluids at pH = 1.5 with minimal degradation in intestinal fluids at pH = 6.8 and in body fluids at pH = 7.0. This unique degradation performance highlights the potential of these materials for addressing the challenges associated with selective drug delivery and localized controlled release in the human body.

Evaluation of postoperative esophagram following peroral endoscopic myotomy (POEM).

The routine use of post-operative esophogram has come under evaluation for multiple upper GI surgeries such as with bariatric surgery and gastric resections. A major complication following Per Oral Endoscopic Myotomy (POEM) is a leak from the myotomy site. A post-operative contrast esophogram is often utilized to evaluate the presence of a leak, however it is not a standardized care practice for all patients. Presently it is selectively performed depending on physician assessment intra-operatively. This project will evaluate the necessity of post-operative contrast esophogram following POEM. We retrospectively reviewed 277 patients diagnosed with achalasia who underwent POEM by two surgeons from 2011 to 2022. 173 patients met the inclusion criteria. A post-operative esophogram was used for the evaluation of a leak. Post-operative esophagram were selectively performed on day 1 following surgery using a water-soluble material. Data was evaluated using Stata. There were 3 detected leaks in the group that underwent esophagrams compared to the non-esophagram group in the early post-operative period. The overall complication rate was 5.5% in the non-esophagram versus 7.9% in the esophagram group. Length of stay was 1.48days in the non-UGI vs 1.76days in the esophagram group. Readmission rate was 10.9% in non-esophagram versus 8.7% in esophagram group. There was no statistically significant difference in outcomes in patients undergoing POEM who received post-operative esophagram verses patients who did not receive post-operative esophagram. The routine use of a contrast esophogram to detect a leak following POEM may not be justified. This study suggests that esophagrams should be performed depending on the clinical signs/symptoms post-operatively that would warrant imaging and intervention.

Biomimetic Aerogel Composite for Atmospheric Water Harvesting.

Adsorption-based atmospheric water harvesting (AWH) with solar-driven photothermal desorption has become an effective means of solving freshwater scarcity in arid regions due to its low energy consumption and high efficiency. Moisture adsorption and desorption capacities are the most critical properties in AWH, and it is a challenge to improve the rate of moisture adsorption and desorption of composite adsorbents. Therefore, this paper reports a SA/carboxymethyl chitosan (CCS)/C/CaCl2-U composite aerogel adsorbents with simultaneously green, low-cost, degradable, and fast hygroscopicity and desorption kinetics. The composite adsorbent used water-soluble biomass materials sodium alginate (SA) and carboxymethyl chitosan (CCS) as the backbone of the aerogel, constructed a vertically aligned unidirectional pore structure by directional freezing, and introduced nanocarbon powder and moisture-absorbent salt calcium chloride (CaCl2) to improve the solar photothermal performance and water absorption, respectively. The results showed that the composite adsorbent had good water uptake capacity at 30-90% relative humidity (RH), the time to reach the water uptake of 1 g g-1 at 90% RH was only 2.5 h, and the final water uptake rate was up to 1.9 g g-1 within 12 h. Meanwhile, the composite sorbent can be heated and desorbed basically within 1 h at 80 °C and its evaporation efficiency is 1.3 times higher than that of the aerogel sorbent prepared by the conventional method when irradiated with 1000 W m-2 light intensity for 2 h. Therefore, the SA/CCS/C/CaCl2-U composite aerogel adsorbent of this study has a potential that can be applied in AWH due to its environmental friendliness, low cost, and faster hygroscopic desorption kinetics.

Lactiplantibacillus plantarum-encapsulated microcapsules prepared from okra polysaccharides improved intestinal microbiota in Alzheimer's disease mice.

Okra contains a viscous substance rich in water-soluble material, including fibers, pectin, proteoglycans, gum, and polysaccharides. This study explored the use of okra polysaccharides by microorganisms and their potential to improve microbiota. The regulation of microcapsules prepared from okra polysaccharides with or without L. plantarum encapsulation on intestinal microbiota was assessed through 16S metagenomic analysis and short-chain fatty acids (SCFAs) in AppNL-G-F/NL-G-F mice (Alzheimer's disease; AD model). We found that Lactobacillaceae and Lactobacillus were majorly regulated by microcapsules prepared from okra polysaccharides in AD mice. Similarly, microcapsules prepared from okra polysaccharides with L. plantarum encapsulation markedly elevated the abundance of Lactobacillaceae and Lactobacillus and increased SCFAs in AD mice. Our results suggest that microcapsules prepared from okra polysaccharides with or without L. plantarum encapsulation may improve intestinal microbiota by elevating Lactobacillus levels in AD mice.

Fulvic Acid Promotes Legume-Rhizobium Symbiosis by Stimulating Endogenous Flavonoids Synthesis and Secretion.

Fulvic acid (FA) promotes symbiosis between legumes and rhizobia. To elucidate from the aspect of symbiosis, the effects of root irrigation of water-soluble humic materials (WSHM) or foliar spraying of its highly active component, FA, on soybean root exudates and on rhizosphere microorganisms were investigated. As a result, WSHM/FA treatments significantly altered root exudate metabolite composition, and isoflavonoids were identified as key contributors in both treatments compared to the control. Increased expression of genes related to the isoflavonoid biosynthesis were validated by RT-qPCR in both treatments, which notably elevated the synthesis of symbiotic signals genistein, daidzin, coumestrol, and biochanin A. Moreover, the WSHM/FA treatments induced a change in rhizosphere microbial community, coupled with an increase in the relative abundance of rhizobia. Our findings showed that WSHM/FA promotes symbiosis by stimulating the endogenous flavonoid synthesis and leads to rhizobia accumulation in the rhizosphere. This study provides new insights into mechanisms underlying the FA-mediated promotion of symbiosis.

Additive manufacturing of double-sided centimeter-scale optics.

In this article we demonstrate rapid manufacturing of an illumination quality double-sided centimeter-scale optics without any post-processing. Two methods are presented: additive manufacturing (AM) using an optically transparent material with a water-soluble support material (support method), and alternatively, using only the optically transparent material but flipping the optics mid-process (flipping method). The main advantage of the flipping method is that only one material is needed. However, the use of support material is more straightforward, allows better alignment between the two sides of the lens and enables more complex lenses manufactured in the future. Both methods result in sufficient surface quality, i.e. surface roughness Rq = 11.48 ±3.32 nm and form accuracy of ±10 μm, for the purposes of illumination optics.

Room temperature, long afterglow, water-soluble materials with multicolor tunability

Developing solution-processable room-temperature long afterglow (RTLA) materials with multi-color tunable emissions based on an inorganic matrix is of considerable practical importance in diverse applications but rarely reported. Herein, a series of water-soluble multicolor afterglow materials (t@LP@Rh123, t@LP@Rh6G, t@LP@RhB, respectively) with afterglow emission colors of green, orange-yellow and red were achieved through triplet-to-singlet Förster-resonance energy transfer (T1-S1 FRET), where the cyan afterglow material t@LP obtained by solventless mechanical grinding method of 4-[2,2':6′,2″-Terpyridin]-4′-ylbenzoic acid and Laponite (LP) was used as an energy donor, and fluorescent dyes Rhodamine 123, Rhodamine 6G and Rhodamine B were used as energy acceptors. Notably, the obtained series of multicolor afterglow materials still exhibit obvious afterglow emission in aqueous solution, which make them potentially useful in the fields of anti-counterfeiting and multilevel information encryption.

3D printed cartridges for the removal of pharmaceuticals from water

The entry of pharmaceuticals into water is a key worldwide concern, with drugs being identified in all near-aqueous ecologies at often worrying concentrations. Pharmaceutical waste in environmental water has been shown to affect environmental equilibrium and pose a risk to humans adversely. In the present study, we fabricated a novel system containing 3D printed sustainable, porous Polyethylene terephthalate glycol (PETG) cartridges and RP-HPLC-DAD methodology to remove non-steroidal anti-inflammatory drugs (NSAIDs) such as diclofenac sodium (DS) and indomethacin (IND) from water samples called “Cartridges.” The device was fabricated using fused deposition modeling (FDM)-mediated 3D printing technology using indigenous hot-melt extruded filaments. To enable FDM 3D printing, the filaments were fabricated using PETG as a primary material and polyvinyl alcohol (PVA), Affnisol™, and Eudragit®EPO as water-soluble pore-forming materials. We showed that the thermoplastic, recyclable PETG composite material, which presents microporous properties after removal of PVA, Affnisol™, and Eudragit®EPO, is effective for extracting both drugs from water solution. The usefulness of the current strategy was demonstrated by the extraction of DS and IND from an aqueous solution followed by RP-HPLC analysis. The% extraction recovery was more than 80 % for both drugs, with an overall relative standard deviation of less than 3 %. The proposed approach can bring a ray of hope in extraction and sample preparation in the analytical industry due to a shift to the use of sustainable cartridges with customizable shapes, sizes, and chemical properties.

Concentrated weak hydrated electrolytes towards ultra-stable high-voltage zinc ion batteries

Hydrogen evolution reactions (HER), dendritic growth, narrow electrochemical windows, and dissolution of cathode materials severely limit the development of aqueous zinc metal batteries. Herein, the unique bisphenylsulfonamide anion (BBI−) is employed to reduce the ion-dipole interaction between Zn2+ and H2O by complexing Zn2+ to suppress H2O decomposition. Meanwhile, the solvent sheath structure of Zn2+-BBI− coordination can provide a large nucleation overpotential, thus producing uniform deposition to suppress dendrites. The hydrogen bonds between BBI− and H2O effectively limit the diffusion of H2O, thereby reducing the dissolution of the water-soluble cathode material into the electrolyte. Both experimental and simulated results are carried out and quantitively confirm the ion paring, hydrogen bond and solvent effect evolution of Zn(BBI)2 electrolytes. This concentrated electrolyte enables Zn||Zn symmetric cells to achieve a superlong cycling life of over 7100 h even at a current of 2 mA cm−2 and capacity of 2 mAh cm−2, while the high mass loading Zn||NaV3O8·1·5H2O and Zn||Zn3(Fe(CN)6)2 cells also exhibit excellent cycling performance at a cut-off voltage of 2.1 V. The findings of this work point to a very promising strategy for the development of long-life aqueous batteries.

Effects of Polymer Conditioner and Nitrogen Fertilizer Application on Nitrogen Absorption and Utilization of Drip-Irrigated Wheat in Arid Areas

Nitrogen (N), an important element for crop growth, has a great impact on dry matter weight and yield. Currently, improving N fertilizer use rate is an urgent problem to be solved in agricultural production in the world. In this field experiment, a self-developed water-soluble polymer material (PPM) with water retention and slow-release characteristics was combined with different doses of N fertilizer (N300 (100% N), PN300 (PPM + 100% N), PN240 (PPM + 80% N), PN180 (PPM + 60% N), CK (no N and PPM)) to analyze the impacts on N uptake and use efficiency of wheat plants. The results showed that the combined application of PPM and N fertilizer significantly improved yield, plant height, biomass, and N uptake and use efficiency of drip irrigated wheat, and the PN240 group had the highest N use rate. In addition, the PN300 group had the highest yield. N use efficiency in the PN240 group was 40.23% higher than that in the N300 group. Therefore, the combined application of PPM and N fertilizer, especially PN240, can reduce the N fertilizer application rate by increasing N use efficiency. This study provides technical reference for improving the N use efficiency of drip-irrigated wheat in arid areas.

Selective regulation of endophytic bacteria and gene expression in soybean by water-soluble humic materials

BackgroundAs part of the plant microbiome, endophytic bacteria play an essential role in plant growth and resistance to stress. Water-soluble humic materials (WSHM) is widely used in sustainable agriculture as a natural and non-polluting plant growth regulator to promote the growth of plants and beneficial bacteria. However, the mechanisms of WSHM to promote plant growth and the evidence for commensal endophytic bacteria interaction with their host remain largely unknown. Here, 16S rRNA gene sequencing, transcriptomic analysis, and culture-based methods were used to reveal the underlying mechanisms.ResultsWSHM reduced the alpha diversity of soybean endophytic bacteria, but increased the bacterial interactions and further selectively enriched the potentially beneficial bacteria. Meanwhile, WSHM regulated the expression of various genes related to the MAPK signaling pathway, plant-pathogen interaction, hormone signal transduction, and synthetic pathways in soybean root. Omics integration analysis showed that Sphingobium was the genus closest to the significantly changed genes in WSHM treatment. The inoculation of endophytic Sphingobium sp. TBBS4 isolated from soybean significantly improved soybean nodulation and growth by increasing della gene expression and reducing ethylene release.ConclusionAll the results revealed that WSHM promotes soybean nodulation and growth by selectively regulating soybean gene expression and regulating the endophytic bacterial community, Sphingobium was the key bacterium involved in plant-microbe interaction. These findings refined our understanding of the mechanism of WSHM promoting soybean nodulation and growth and provided novel evidence for plant-endophyte interaction.

Fabrication of Tuneable Tissue-Mimicking Phantom for Optical Methods.

Tissue mimicking optical phantoms are commonly used to calibrate or validate the performance of near-infrared spectroscopy or tomography. Human tissue is not only irregular in shape, but also exhibits dynamic behaviour, which can cause changes in optical properties. However, existing phantoms lack complex structures and/or continuously varying optical properties. The project aimed to design, fabricate and characterise a novel phantom system for testing near-infrared imaging devices. We designed a dynamic tissue-mimicking phantom platform which features arbitrary internal shapes and variable optical properties. The solid part of phantom was made of silicone material with absorbing and scattering properties similar to the brain. We printed a semi-ellipsoidal sphere (a major axis=20 mmand a minor axis=the third axis=12 mm) using a water-soluble material polyvinyl alcohol (PVA). The shape was placed at the depth of 5 mm in the silicone bulk. The desired internal hollow structure was formed after curing and submerging the phantom in water. The liquid part contained dyes and Intralipid. The optical properties within the internal shape were adjusted by injecting the liquid solutions of varying dye concentrations with a syringe pump at a constant rate. The phantom was measured by a frequency domain near-infrared spectroscopy (FD NIRS) and imaged by a time domain near-infrared optical tomography (TD NIROT). A dynamic phantom system with a complex internal structure and varying optical properties was created. Changes in light intensity were detected by the FD NIRS. The internal structure of this phantom was accurately recovered by NIROT image reconstruction. We successfully developed a novel phantom system with an internal complex shape and continuously adjustable optical properties. This phantom was accurately imaged using NIROT, and the changing light intensity was detected by NIRS. It is a valuable tool for validating optical technologies.

Development of a sampling protocol for collecting leaf surface material for multiphase chemistry studies.

Plant leaves and water drops residing on them interact with atmospheric oxidants, impacting the deposition and emission of trace gases and mediating leaf damage from air pollution. Characterizing the chemical composition and reactivity of the water-soluble material on leaf surfaces is thus essential for improving our understanding of atmosphere-biosphere interactions. However, the limited knowledge of sources and nature of these chemicals challenges sampling decisions. This work investigates how sampling variables and environmental factors impact the quantity and composition of water-soluble material sampled from wet leaves and proposes a flexible protocol for its collection. The ratio of solvent volume-to-leaf area, the solvent-to-leaf contact time, and environmental parameters - including the occurrence of rain, plant location and its metabolism - drive solute concentration in leaf soaks. Despite minor variations, UV-vis absorption spectra of leaf soaks are comparable to authentic raindrops collected from the same tree and share features with microbial dissolved organic matter - including overall low aromaticity, low chromophore content, and low average molecular weight. In addition to guiding the development of a sampling protocol, our data corroborate recent hypotheses on the amount, origin, nature, and reactivity of water-soluble organics on wet leaves, providing new directions of research into this highly interdisciplinary topic.

Enhancing Deep-Seated Melanoma Therapy through Wearable Self-Powered Microneedle Patch.

Effective treatment of deep-seated tumors relies on enhanced drug penetration in transdermal drug delivery systems. While microneedles (MNs) and iontophoresis techniques have shown improved transdermal drug delivery efficiency, challenges such as skin elasticity, high electrical resistance of the stratum corneum, and external power supply requirements hinder their efficacy in treating deep-seated tumors. In this study, a wearable, self-powered MN patch that integrates a flexible triboelectric nanogenerator (F-TENG) is presented, aimed at advancing deep-seated tumor therapy. MNs are composed of water-soluble materials mixed with negatively charged pH-responsive nanoparticles (NPs) loaded with therapeutic drugs. The F-TENG harnesses personal mechanical movements generate electrical energy. Leveraging the advantages of both MNs and F-TENG, therapeutic NPs can penetrate deep skin locations upon MN patch insertion, releasing drugs rapidly in acidic tumor tissues. Owing to these features, a single administration of the integrated MN-patch in a mouse model with deep-seated melanoma exhibits superior therapeutic efficacy in inhibiting deep-located tumor compared to using the MN-patch alone, indicating promising potential for treating tumors at deep sites.