Water Reuse Research Articles

Integrated treatment of stormwater using multistage filtration (MSF) for domestic application (reuse)

Stormwater harvesting is a promising solution for global freshwater depletion, particularly in tropical regions with abundant rainfall. However, it is not widely used due to the lack of suitable treatment technologies for domestic applications. Multi-stage filtration (MSF) is an effective integrated treatment technology that provides a cost-effective alternative for stormwater treatment. This study investigated MSF's capacity for treating stormwater at different stages. The MSF designed and built comprised the down-flow roughing filter (DRF) and slow sand filter (SSF). The results achieved by the MSF for the treated effluents were: pH (7.1–8.1), temperature (27.6–29.4°C), electrical conductivity (EC) (100–190 µS/cm) and total dissolved solids (TDS) (70–130 mg/L). Turbidity removal efficiency of the MSF was in the range of 36–99% (5.825–164.05 NTU) and the overall average removal efficiency of the MSF was 74%, 90% and 86% for total coliforms (TC) (360–11 800 CFU/100 mL), faecal coliforms (FC) (0–1 300 CFU/100 mL) and Enterococcus spp. (120– 1 400 CFU/100 mL), respectively. The study identified stormwater reuse potentials based on international guidelines and benchmarks. For the treated effluent, pH, temperature, EC and TDS were all within the permissible limits for toilet, laundry, bathing, recreational and agricultural water reuse, while turbidity suited agricultural (non-food crop) and restricted urban reuse. 46% of the effluent was suitable for recreational purposes as this satisfied the 50 NTU standard. 62.5% of the effluent satisfied the FC standard for toilets and urinals and agricultural reuse (non-food crop) purposes, while 87.5 % of the effluent satisfied urban reuse purposes (restricted access). 66.67% of the effluent satisfied the Enterococcus spp. standard for agricultural reuse (non-food crop). All treated effluents satisfied the TC bathing standard. This study shows that after minimal disinfection, stormwater effluents offer potential reuse in household applications, thereby reducing potable water demand.

Analysis of sewage treatment process and effect Take Maidao sewage plant in Qingdao as an example

The purpose of this paper is to analyze the current situation of urban sewage treatment, understand the process of sewage treatment, conduct in-depth analysis of it combined with actual cases, and put forward effective suggestions for improvement. Nowadays, with the development of science and technology, many cities have built advanced sewage plants, as an example as Qingdao, which is a serious water shortage city in Shandong Province of China. More specifically, a field interview and a field trip in Mai Dao sewage plant provide the actual treatment process and real data of the plant. It provides with a comprehensive process and actual removal rate of the plant, so we can have a deeper understanding of the current status of urban sewage treatment processes. Additionally, an analysis of the effect of every devices in the process supports the effectiveness of the plant. Furthermore, this paper gives information about current situations of reuse water process and offers some suggestions to the current treatment process and the use of outflow water.

Water reuse and resource recovery from greenhouse wastewater by capacitive electrodialysis at pilot scale

As food production dominates global freshwater consumption and nutrient discharge regulation tightens, the performance of novel technologies at applied scale needs to be studied to optimize water use and minimize environmental impact. Water reuse and the nutrient recovery from greenhouse wastewater were assessed utilizing one-pass capacitive electrodialysis (CED) at a pilot scale (19.32 m2 membrane area, 1–4 m3/day capacity), employing carbon-based electrodes. CED was optimized for key parameters, including applied voltage, cross-flow velocity, staging, water recovery, and varying feed concentrations. High-quality greenhouse irrigation water (conductivity<0.2 mS/cm and Na+ < 0.1 mmol/L) was produced, meeting specified guidelines. Na+ was retained less compared to Ca2+ and Mg2+ (86 % ± 4 %, 97 % ± 2 %, and 98 % ± 3 % removal, respectively) and nutrients concentration factors for K+, NO3− and PO43− reached up to 2.3 (596 ± 5 mg/L), 2.7 (1330 ± 20 mg/L), and 1.9 (130 ± 2 mg/L), respectively. There was no significant improvement in ion removal for all feed compositions beyond 12 V and 80 % water recovery. CED's specific energy consumption (SEC) with optimized parameters was 4-fold lower than the modeled RO system, and lower than previous electrodialysis studies. The highest SEC obtained was 0.24 kWh/m3. These findings suggest that CED is a promising technology for the greenhouse horticulture sector, aiding the move toward zero liquid discharge.

Application of Nanostructured Materials for the Remediation of Microbes Contaminated Water and Sustainable Water Treatment

Regardless of whether pollution originates from inorganic sources such as heavy metals, or organic waste such as industrial discharges; it poses a grave threat toward human health and environmental equilibrium. Air and water quality, soil health, ecosystem integrity—all can suffer negative impacts due to these pollutants with far-reaching effects on both public health and our surroundings. To alleviate this pervasive problem effectively: comprehensive strategies must be implemented that encompass strict regulatory measures; advocate for sustainable industrial practices – promoting environmentally conscious behaviors is also key, and recent decades have seen a marked rise in pollutants in water sources. Human existence depends on having access to clean water, yet numerous sources are now seriously contaminated. Fortunately, using several cutting-edge methods, nanotechnology provides intriguing and useful options for wastewater cleaning. Numerous pollutants, including germs, sediments, and dangerous chemicals like Mercury and Arsenic, may be removed using nanotechnology. The development of wastewater treatment alternatives is being aided by cutting-edge nanotechnology, which has the potential to improve the reuse of water, recycling, and restoration. This not only improves the quality and durability of the water over the long term, but also assures future generations will have access to it. Diverse procedures and strategies are now used in the field of water purification, many of which use nanomaterials. Nanofiltration is a particularly effective and straightforward technique. Low pressure water is used in this method to flow through nanofiltration filters; these filters may be quickly cleaned by simply back-flushing. Utilizing carbon nanotubes, which are recognized for their efficiency in eliminating a wide range of water contaminants because of their incredibly smooth interiors, is another benefit of nanofiltration. When compared to traditional microstructure materials, nanostructured materials, such as Ag (silver), Au (gold), metal oxides, and CNTs (carbon nanotubes), provide several advantages in the purification of water. They are excellent alternatives for tackling the urgent problems caused by water contamination because of their increased surface area and exceptional qualities. In conclusion, the use of nanomaterials in water filtration, such as Ag, Au, metal oxides, and CNTs, marks a huge step towards protecting our planet's most valuable resource. We can create a sustainable future where everyone has access to clean, secure drinking water by using the potential of nanotechnology.

Collector-drainage water reuse for crop irrigation: Experiment on saline lands of southern Kazakhstan

Collector-drainage water reuse for crop irrigation: Experiment on saline lands of southern Kazakhstan

Resource recovery through bioremediation of fuel-synthesis wastewater in a biofilm photobioreactor using purple non-sulfur bacteria: A circular bioeconomy approach

In the current era of wastewater treatment, integrating reusable water production with resource recovery is a key goal. This study aims to treat fuel-synthesis wastewater (FSW), intending to recover various resources, including polyhydroxybutyrate (PHBs), single cell protein, bacteriochlorophylls, carotenoids, and coenzyme Q10 from suspended and biofilm growth to decrease the harvesting costs. The study considered the treatment process, biofilm growth, and resource recovery potential in a mixed-culture system enriched with purple non-sulfur bacteria for treating FSW. Specifically, the effects of four different FSW strengths (25–100 %) and nitrogen sufficiency (N+) or deficiency (N−) were evaluated in eight biofilm photobioreactors. This study observed a direct correlation between the concentration of FSW and PHB content; specifically, as the FSW content decreased from 100 % (undiluted) to 25 % the PHB content decreased. The undiluted condition achieved 17 % dry cell weight as PHB in the suspended growth and 22.6 % in the biofilm growth under N− condition. The protein content ranged between 33 and 44 %, and the presence of nitrogen had a slight positive effect on higher protein content. No trend was observed for carotenoids or bacteriochlorophylls in the N− condition. In contrast, for the N+ condition, the concentration of bacteriochlorophylls increased with decreasing wastewater concentration under suspended growth, while it decreased with decreasing wastewater concentration under biofilm growth. Coenzyme Q10 concentration was enhanced under the most growth-limited condition (25 %, N−). PHB and protein content of these resources seem most promising when using N− and N+ conditions, respectively.

Trade-off between Endocrine-Disrupting Compound Removal and Water Permeance of the Polyamide Nanofiltration Membrane: Phenomenon and Molecular Insights.

The polyamide (PA) nanofiltration (NF) membrane has the potential to remove endocrine-disrupting compounds (EDCs) from water and wastewater to prevent risks to both the aquatic ecosystem and human health. However, our understanding of the EDC removal-water permeance trade-off by the PA NF membrane is still limited, although the salt selectivity-water permeance trade-off has been well illustrated. This constrains the precise design of a high-performance membrane for removing EDCs. In this study, we manipulated the PA nanostructures of NF membranes by altering piperazine (PIP) monomer concentrations during the interfacial polymerization (IP) process. The upper bound coefficient for EDC selectivity-water permeance was demonstrated to be more than two magnitudes lower than that for salt selectivity-water permeance. Such variations were derived from the different membrane-solute interactions, in which the water/EDC selectivity was determined by the combined effects of steric exclusion and the hydrophobic interaction, while the electrostatic interaction and steric exclusion played crucial roles in water/salt selectivity. We further highlighted the role of the pore number and residual groups during the transport of EDC molecules across the PA membrane via molecular dynamics (MD) simulations. Fewer pores decreased the transport channels, and the existence of residual groups might cause steric hindrance and dynamic disturbance to EDC transport inside the membrane. This study elucidated the trade-off phenomenon and mechanisms between EDC selectivity and water permeance, providing a theoretical reference for the precise design of PA NF membranes for effective removal of EDCs in water reuse.

Plant-Wide Models for Optimizing the Operation and Maintenance of BTEX-Contaminated Wastewater Treatment and Reuse

Benzene, toluene, ethylbenzene and xylenes, collectively known as BTEX compounds, are significant emerging contaminants in municipal wastewater. Stricter effluent quality regulations necessitate their removal, especially with concerns about organic micropollutant concentrations. Water scarcity further underscores the need for wastewater treatment to ensure safe agricultural or drinking water supplies. Although biological treatment partially reduces BTEX levels through processes like biodegradation and sorption, additional purification using physico-chemical methods is crucial for substantial reduction. This paper aims to outline plant-wide simulation methods for treating BTEX-contaminated sewage and facilitating reuse, adhering to IWA Good Modelling Practice Guidelines. The model, built upon the MiniSumo process model, incorporates equations detailing BTEX metabolism and removal kinetics, informed by an extensive literature review. Using a variant of the Benchmark Simulation Model with granular activated carbon for water reuse, the study examines strategies for improving effluent quality and minimizing operational costs. These strategies include adjusting the sludge retention time and airflow to enhance BTEX degradation and stripping, respectively, and comparing maintenance approaches for the GAC tower.

TiO2-MoS2-PMMA Nanocomposites for an Efficient Water Remediation.

An improvement of water supply and sanitation and better management of water resources, especially in terms of water reuse, is one of the priorities of the European Green Deal. In this context, it is crucial to find new strategies to recycle wastewater efficiently in a low-cost and eco-friendly manner. The immobilization of inorganic nanomaterials on polymeric matrices has been drawing a lot of attention in recent years due to the extraordinary properties characterizing the as-obtained nanocomposites. The hybrid materials, indeed, combine the properties of the polymers, such as flexibility, low cost, mechanical stability, high durability, and ease of availability, with the properties of the inorganic counterpart. In particular, if the inorganic fillers are nanostructured photocatalysts, the materials will be able to utilize the energy delivered by light to catalyze chemical reactions for efficient wastewater treatment. Additionally, with the anchoring of the nanomaterials to the polymers, the dispersion of the nanomaterials in the environment is prevented, thus overcoming one of the main limits that impede the application of nanostructured photocatalysts on a large scale. In this work, we will present nanocomposites made of polymers, i.e., polymethyl methacrylate (PMMA), and photocatalytic semiconductors, i.e., TiO2 nanoparticles (Evonik). MoS2 nanoflakes were also added as co-catalysts to improve the photocatalytic performance of the TiO2. The hybrid materials were prepared using the sonication and solution casting method. The nanocomposites were deeply characterized, and their remarkable photocatalytic abilities were evaluated by the degradation of two common water pollutants: methyl orange and diclofenac. The relevance of the obtained results will be discussed, opening the route for the application of these materials in photocatalysis and especially for novel wastewater remediation.

Multiple barriers as an efficient treatment for removing pesticides aiming direct potable reuse: A pilot scale study

Water reuse for potable purposes can represent a realistic source supply of drinking water in areas with water scarcity. Therefore, combining conventional wastewater treatment technologies with advanced technologies is necessary to remove contaminants and obtain high-quality and safe water. In this study, the pesticides and degradation products, atrazine (ATZ), hydroxyatrazine (ATZOH), deethylatrazine (DEA), deisopropylatrazine (DIA), simazine (SMZ), ametryn (AMT), diuron (DIU), 2,4-D, fipronil (FIP), fipronil sulfide (FIP-SF) and fipronil sulfone (FIP-SN) were evaluated in effluent after membrane bioreactor (MBR), effluent after advanced treatment by multiple barriers (MBR, reverse osmosis, UV/H2O2 and activated carbon), in tap water collected in the urban region of Campinas and in the Atibaia River (water supply source from city of Campinas). The pesticide concentrations in the Atibaia River and the post-MBR effluent ranged between 1 and 434 ng L−1 and 1 and 470 ng L−1, respectively. Therefore, the Atibaia River and the post-MBR effluent had the same magnitude pesticide concentrations. In the production of potable water reuse, after the multiple barriers processes, only fipronil (1 ng L−1) and atrazine (3 ng L−1) were quantified in some of the samples. In tap water from Campinas, atrazine, ATZOH, DEA, diuron, and 2,4-D were quantified in concentrations ranging between 3 and 425 ng L−1. Therefore, when comparing drinking water obtained from conventional treatment with potable water reuse, according to the pesticides studied, it is possible to conclude that the advanced treatment used on a pilot scale is promising for use in a potable water reuse plant. However, studies involving more microbiological and chemical parameters should be conducted to classify potable water reuse as drinking water.

Will the European Regulation for water reuse for agricultural irrigation foster this practice in the European Union?

ABSTRACT The development of the water reuse sector within the European Union (EU) varies considerably. In 2020, Portugal, Spain, Italy, Greece, France and Cyprus had the most comprehensive regulations for the reuse of reclaimed water for agriculture. The approval of a common regulation by the EU Parliament and the Council in May 2020 (which came into effect in June 2023) elicits the question of how each country will comply with it. This review compares (i) national regulations to the 2020 European Regulation, (ii) existing projects with respect to their performance in terms of water quality and (iii) raises a debate about the role of the EU Regulation in fostering water reuse at the EU level. The European Regulation will probably strengthen consumer confidence as common minimum requirements are now required. However, the issues related to micropollutants, disinfection by-products or possible changes in the water quality downstream of the compliance point are not fully considered by the EU Regulation. Moreover, other techno-economic obstacles to be overcome include the distance between the production of treated water and agricultural needs, the low economic competitiveness of reclaimed water and the implementation of the multi-barrier approach.

Impact of recurring irrigation with treated domestic wastewater on heavy metal accumulation in the soil

Water reuse for irrigation is a common practice globally, serving as an alternative to clean water. Wastewater contains traces of heavy metals that accumulate in the soil and food chain, posing an environmental and public risk. This study investigated the effect of irrigation with treated domestic wastewater (TDW) emanating from a homogenous community on heavy metal accumulation in the soil irrigated for three recurring farming cycles, namely R1, R2, and R3. A greenhouse experiment was conducted involving plots irrigated with TDW (PTw) and plots irrigated with fresh water (PFw) in triplicate. Soil samples were collected at depths of 0–20, 20–40, and 40–60 cm. Results revealed that heavy metals Pb, Cu, Cr, Zn, Cd, and Ni remained within the WHO permissible limits in the PTw and PFw, except Cd at 40–60 cm after the R3 in the TPw. Irrigation with TDW caused a decrease in Pb and Cd with respect to the baseline levels by 86–91% and 88–96% respectively. Other heavy metals increased in the soil in the order of Cr>Cu>Ni>Zn at 0–20 cm, Cr>Cu>Zn>Ni at 20–40 cm, and Cr>Cu>Ni>Zn at 40–60 cm. Variations in heavy metal concentrations were inconsistent with farming cycles except for Cu, which increased in the order of 3.2±0.75, 4.4±0.66, and 4.8±1.23 mg/kg at 0–20 cm for R1, R2, and R3, respectively, and 3.4±0.66, 3.7±0.62, and 6.0±0.44 mg/kg at 20–40 cm in the same order. Pollution index values revealed that irrigation with TDW for three recurring farming cycles caused slight soil contamination (1≤PI<2) with Zn and Ni, moderate soil contamination (2≤PI<3) with Cu, and high soil contamination (3<PI) with Cr at depths of 0–20 and 40–60 cm. The pollution load index indicated moderate soil pollution (1<PLI≤2) with heavy metals after the R3 at 40–60 cm. The findings suggest that irrigation with TDW proceed for at least three recurring farming cycles without causing significant soil heavy metal accumulation.

Meta-Analysis of Optical Surrogates for the Characterization of Dissolved Organic Matter.

Optical surrogates, derived from absorbance and fluorescence spectra, are widely used to infer dissolved organic matter (DOM) composition (molecular weight, aromaticity) and genesis (autochthonous vs allochthonous). Despite the broad adoption of optical surrogates, several limitations exist, such as context- and sample-specific factors. These limitations create uncertainty about how compositional interpretations based on optical surrogates are generalized across contexts, specifically if there is duplicative or contradictory information in those interpretations. To explore these limitations, we performed a meta-analysis of optical surrogates for DOM from diverse sources, both from natural systems and after water treatment processes (n = 762). Prior to analysis, data were screened using a newly developed, standardized methodology that applies systematic quality control criteria before reporting surrogates. There was substantial overlap in surrogate values from natural and treated samples, suggesting that the gradients governing the surrogate variability can be generated in both contexts. This overlap provides justification for using optical surrogates originally developed in the context of natural systems to describe DOM changes in engineered systems, although the interpretations may change. Absorbance-based surrogates that describe the amount of spectral tailing (e.g., E2:E3 and S275-295) had a high frequency of strong correlations with one another but not to specific absorbance (SUVA254) or absorbance slope ratio (SR). The fluorescence index (FI) and biological index (β/α) were strongly correlated with one another and to the peak emission wavelength but not to the humification index (HIX). Although SUVA254 and FI have both been correlated to DOM aromaticity in prior research, there was a lack of reciprocity between these optical surrogates across this data set. Additionally, there were patterns of deviations in the wastewater subset, suggesting that effluent organic matter may not follow conventional interpretations, urging caution in the use of optical surrogates to track DOM in water reuse applications. Finally, the meta-analysis highlights that three aspects should be captured when optical spectra are used for DOM interpretation: specific absorbance, absorbance tailing, and the extent of red-shifted fluorescence. We recommend that SUVA254, E2:E3, and FI or β/α be prioritized in future DOM studies to capture these aspects, respectively.

Evaluating drained water quality in a pilot worm-sludge treatment reed bed planted with Arundo donnas in the Mediterranean climate

This study evaluated the impact of incorporating earthworms (Eisenia fetida) on the drained water quality from a sludge treatment reed bed. The experiment encompassed four setups of treatment beds in two replicates: planted with Arundo donax and addition of earthworms, planted without earthworms, unplanted with earthworms, and treatment bed without plants nor earthworms as control. The units were fed every two weeks with mixed sewage sludge, a blend of primary and secondary sludge over 24 cycles. The mixed sewage sludge had mean dry and volatile solid contents of 24.71 g.DS.L−1 (± 13.67) and 19.14 g.VS.L−1 (± 10.29) resulting a sludge loading rate of 43.59 kg.DS.m−2.year−1 (± 14.49). The inclusion of earthworms in the planted unit reduced release masses of total suspended solids, chemical oxygen demand, nitrate and phosphorous by 43, 45, 75 and 45 % compared to the planted unit. Plant biomass production increased by 43 % with the earthworm presence. The removal efficiency of the units improved after a ramp-up phase (after six months feeding) of which the concentration of TSS, COD and Escherichia coli met limits for water reuse while nitrogen components and phosphorous surpassed the limits. The planted unit with earthworms removed 99 and 99 % of TSS and COD, respectively. Overall, water loss namely through evapotranspiration and earthworm hydration need, positively correlated with pollutant concentration, and earthworm-planted unit had 46 % higher water loss compared to control unit.

Autohydrolysis of sugarcane bagasse with water reuse: Impacts on residues’ composition and enzymatic hydrolysis

This work presents a new sequential approach to the sugarcane bagasse autohydrolysis process in a way that the liquor from the previous reaction was reused in the next one, and the makeup water for the next batch was used to wash the solid fraction before being added to the liquor in the next batch. This approach was suggested first as a way of reducing the water usage in the process, and second as a way of concentrating the liquor in any interesting component, working with the possibility of losing efficiency towards the glucose production through a cellulose loss to the liquor or enzymatic efficiency loss from a higher inhibitor concentration. Two sets of five sequential batches were performed: one washing the solids with the makeup water prior to the enzymatic step (Set 2), and the other one without the washing step (Set 1), looking forward to the effects of the water reuse over the glucose production and the liquor composition. Autohydrolysis pretreatment removed most of the hemicellulose (∼94 %), with liquor recycling improving its removal until the third batch and stabilizing after that. Although the washing step showed little impact on the composition of the solids, it was determinant to the success of the enzymatic hydrolysis, since it was possible to maintain the cellulose to glucose yield around 53% throughout the batches. There was a 64 % reduction in the water used in the sequential reactions without interfering in the glucose production, which indicates that the proposed strategy could be successfully used to reduce costs and environmental impacts associated with the pretreatment of lignocellulosic biomass.

Reduction of antimicrobial resistance: Advancements in nature-based wastewater treatment

Water scarcity, affecting one-fifth of the global population, is exacerbated by industrial, agricultural, and population growth pressures on water resources. Wastewater, containing Contaminants of Emerging Concern (CECs) such as antibiotics, presents environmental and health hazards. This study explores a Nature-Based Solution (NBS) using Constructed Wetlands (CWs) for wastewater reclamation and CECs removal. Two CW configurations (Vertical-VCW and Hybrid-HCW) were tested for their efficacy. Results show significant reduction in for all the chemico-physical and biological parameters meeting Italian water reuse standards. Furthermore, Antibiotic Resistant Bacteria (ARB) and Antibiotic Resistant Genes (ARGs) were effectively reduced, emphasizing the potential of the CWs in mitigating Antimicrobial Resistance (AMR). Lettuce seedlings irrigated with the treated wastewater exhibited no ARB/ARGs transfer, indicating the safety of the reclaimed wastewater for agricultural use. Overall, CWs emerge as sustainable Nature Based Solutions (NBS) for wastewater treatment, contributing to global water conservation efforts amid escalating water scarcity challenges.

Innovative approaches for Microcystin removal: Bacterioplankton biodegradation and multi-soil-layering system performance assessment

Microcystins (MCs) pose a significant threat to human health and the environment due to their persistence and toxicity as potent cyanobacterial toxins. Effective biodegradation strategies are required for their removal and detoxification. In this study, bacterioplankton were isolated from eutrophic reservoir water used for crop irrigation and tested for their ability to degrade MCs. These bacteria are hydrologically transported from the contaminated reservoir to downstream farms where they are able to grow under the favorable conditions provided by a multi-soil-layering (MSL) system, a low-cost and locally applicable ecotechnology for the removal and detoxification of MCs. These bacteria enhance the ability of the MSL to remove MCs by forming biofilms within the MSL system. The bacterial strains were then sequenced and their partial 16S rRNA was compared to the reference strains in the NCBI database. The effectiveness of the MSL system in the removal of MCs from water was evaluated. The MSL utilizes a layered soil matrix that promotes microbial growth and physicochemical interactions that enable the removal of various contaminants. The mechanisms of MC removal in the MSL were evaluated by studying the physicochemical properties of the system substrate before and after treatment using X-ray fluorescence, zeta potential, and scanning electron microscopy (SEM) analyses. The microbial functional groups, including ammonifying and denitrifying bacteria, were also investigated in the MSL soil matrices before and after treatment. The results showed that seven bacterial strains exhibited high MC degradation capabilities, with MC degradation performance exceeding 97%. These isolated bacterial strains had a nucleotide identity score of 100% and an E value of 0.0 compared to reference strains. The MSL showed a 99% removal rate for MC-LR and MC-YR, as well as significant reductions in other pollutants, including COD (60%), BOD5 (60%), chlorophyll-a (96%), pheophytin (70%), organic nitrogen (80%), and nitrites (90%). After treatment, there was a statistically significant increase in the total bacterial count, as well as ammonifying and denitrifying bacteria, in the MSL soil matrices compared to their state before treatment. SEM analyses revealed the formation of dense biofilm microbiota, indicating additional biological processes besides adsorption for MC reduction. Overall, the MSL provides a low-cost alternative for the removal of MCs and cyanobacteria with minimal resource requirements and maintenance. It offers a promising solution for mitigating toxic cyanobacterial blooms, ensuring safe agricultural water reuse.

Water Reuse: A Comprehensive Review

Water scarcity has emerged as a pressing global concern, driven by population growth, urbanization, and climate change. As freshwater resources dwindle, the imperative for water reuse becomes increasingly apparent. Reusing water presents a sustainable solution to mitigate scarcity, offering a way to maximize the efficiency of available resources. This review delves into the multifaceted landscape of water consumption and reuse, aiming to provide a comprehensive analysis and understanding of this critical issue. It explores the diverse implications of unregulated water consumption, spanning from its impacts on household routines to its profound influence on economic activities. Additionally, it scrutinizes the legislative framework surrounding water usage, shedding light on the policies and regulations in place. Furthermore, the review investigates the current status of water reuse practices in Europe, delving into various methods of water recovery. Finally, it examines public perceptions and attitudes toward recycled water, offering insights into the societal outlook on this increasingly vital aspect of water management.

From shower to table: fate of organic micropollutants in hydroponic systems for greywater treatment and lettuce cultivation

ABSTRACT This study evaluated the dual functionality of hydroponic systems to grow edible crops while treating greywater (GW) containing 20 organic micropollutants (OMPs). Various conditions with differing nutrient contents were tested: raw GW, GW with struvite, and GW with commercial nutrient solution. System performance was assessed with plant growth and standard parameters and OMP removal. After 4-week exposure, all conditions produced healthy-looking plants, proving GW as a viable hydroponic growth medium. However, only the condition with commercial solution yielded plants comparable to the biotic control, indicating the necessity of nutrient supplementation. Effluent from conditions with well-developed plants met the requirements of the European water reuse legislation (EU 2020/741) for scenarios B–D (food crops not in direct contact with the reclaimed water and industrial crops), and had the highest OMP removal, showcasing the effectiveness of the system for OMP treatment. Estimated calculations of OMP detected in leaves (10/20 OMP detected, predominantly positive and small) resulted in calculated potential human health risks through lettuce intake for two compounds: atenolol and epoxycarbamazepine. These findings support a continued evaluation of the behavior of other OMPs and their transformation products in water–plant systems, and their consideration in legislation on water reuse and food safety.

Removal of Erythromycin from Water by Ibuprofen-Driven Pre-Organized Divinyl Sulfone Cross-Linked Dextrin.

Water recycling and reuse are cornerstones of water management, which can be compromised by the presence of pollutants. Among these, pharmaceuticals can overcome standard water treatments and require sophisticated approaches to remove them. Sorption is an economically viable alternative limited by the need for sorbents with a sorption coefficient (Kd) higher than 500 L/kg. The cross-linking of dextrin (Dx) with divinyl sulfone (DVS) in the presence of 1 mmol or 5 mmol of ibuprofen (IBU) yields the insoluble polymers pDx1 and pDx5 with improved affinity for IBU and high selectivity towards erythromycin (ERY) and ERY Kd higher than 4 × 103 L/kg, when tested against a cocktail of six drugs. Characterization of the polymers shows that both pDx1 and pDx5 have similar properties, fast sorption kinetics, and ERY Kd of 13.3 × 103 for pDx1 and 6.4 × 103 for pDx5, representing 26.6 and 12.0 times the 500 L/kg threshold. The fact that new affinities and improvements in Kd can be achieved by cross-linking Dx in the presence of other molecules that promote pre-organization expands the applications of DVS cross-linked polysaccharides as sustainable, scalable, and environmentally friendly sorbents with a potential application in wastewater treatment plants (WTPs).