Water Contact Angle Measurements Research Articles

Ultrathin Al2O3 film modification on waterborne epoxy coatings by atomic layer deposition for augmenting the corrosion resistance

The polar channels formed by the curing of waterborne anticorrosive coatings compromise their water resistance, leading to coating degradation and metal corrosion. To enhance the anticorrosive performance of waterborne coatings, this study proposed a novel method of depositing ultrathin Al2O3 films on the surface of waterborne epoxy coatings by atomic layer deposition, a technique that can modify the surface properties of polymer materials by depositing functional films. The Al2O3-modified coatings exhibited improved sealing and barrier properties by closing the polar channels and surface defects and cracks. The surface structure and morphology of the modified coatings were characterized by x-ray photoelectron spectroscopy and scanning electron microscopy. The hydrophilicity and corrosion resistance of the modified coatings were evaluated by water contact angle measurement, Tafel polarization curve, and electrochemical impedance spectroscopy. The results indicated that the water contact angle of the Al2O3-modified coating increased by 48° compared to the unmodified coating, and the protection efficiency of the modified coating reached 99.81%. The Al2O3-modified coating demonstrated high anticorrosive efficiency and potential applications for metal anticorrosion in harsh marine environments.

Phenyl-Substituted Cage Silsesquioxane-Based Star-Shaped Giant Molecular Clusters: Synthesis, Properties, and Surface Segregation Behavior.

The crystallinity, solubility, and physical properties of polyhedral oligomeric silsesquioxane (POSS) compounds are highly dependent on their organic substituents. We previously synthesized a series of isobutyl-substituted star-shaped POSS derivatives with aliphatic chain linkers of different length. In this study, we prepared C3- and C6-linked phenyl-substituted star-shaped POSS derivatives (3Ph-C3 and 3Ph-C6) by the hydrosilylation of heptaphenylallyl- and hexenyl-POSS (1a and 1b) and octadimethylsiloxy-Q8-silsesquioxane (Q8M8H) (2), respectively, and their properties were compared with those of the corresponding isobutyl-substituted derivatives (5iBu-C3 and 5iBu-C6). Although 3Ph-C6 was only soluble in chloroform and insoluble in tetrahydrofuran (THF) and toluene, 3Ph-C3 was soluble even in THF and toluene, suggesting that the shorter linkers of the derivative afford a wider range of solvents for dissolution. Differential scanning calorimetry analysis showed that 3Ph-C3 exhibited a baseline shift at 190 °C and an endothermic peak at 316 °C. However, no clear baseline shift was observed for 3Ph-C6. Thermogravimetric analysis showed that the shorter linker in the phenyl-substituted star-shaped POSS derivative significantly increased the decomposition temperature compared with the longer linker. The annealed cast film of 3Ph-C3 at 340 °C above its melting temperature formed a transparent film even after cooling to room temperature. However, an opaque whitish film was formed in the case of 3Ph-C6. Poly(methyl methacrylate) (PMMA) films containing 2 wt % 3Ph-C3 and 3Ph-C6 were prepared by casting their chloroform solutions onto glass substrates overnight at room temperature. The static water contact angle measurements and XPS analysis for the castings film containing 3Ph-C3 and 3Ph-C6 suggested that degree of the segregation amount of 3Ph-C3 was larger than that of 3Ph-C6. The shorter linker length in the phenyl-substituted star-shaped POSS derivative, 3Ph-C3, with its greater predicted solubility in PMMA, exhibited entropy-driven surface segregation.

Magnetron-Sputtered Long-Term Superhydrophilic Thin Films for Use in Solid-State Cooling Devices

Pulse-magnetron-sputtered long-term superhydrophilic coatings have been synthesized to functionalize the surfaces of solid-state cooling devices, e.g., electrocaloric heat pumps, where not only a complete wetting of the surface by a fluid is intended, but also fast wetting and dewetting processes are required. The coatings consist of a (Ti,Si)O2 outer layer that provides lasting hydrophilicity thanks to the mesoporous structure, followed by an intermediate WO3 film that enables the reactivation of the wettability through visible light irradiation, and a W underlayer which can work as a top electrode of the electrocaloric components thanks to its suitable electrical and thermal conductivity properties. Process parameter optimization for each layer of the stack as well as the influence of the microstructure and composition on the wetting properties are presented. Finally, water contact angle measurements, surface energy evaluations, and a contact line dynamics assessment of evaporating drops on the coatings demonstrate that their enhanced wetting performance is attributed not only to their intrinsic hydrophilic nature but also to their porous microstructure, which promotes wicking and spreading at the nanometric scale.

Porous Morphology of High Grafting Density Mixed Polyelectrolyte Brushes Grown from a Y-Inimer Coating.

Mixed A/B polyelectrolyte (PE) brushes of opposite charges are grown from a Y-shaped initiator-bearing coating to facilitate intimate mixing of the A and B polyelectrolytes in a 1:1 grafting ratio. The design of the Y-shaped inimer includes both ATRP and NMP initiators attached to a common Y-junction. A copolymer of a Y-shaped inimer with glycidyl methacrylate is cross-linked to the substrate resulting in a stable ultrathin coating decorated with Y-shaped initiators. Weak PE A/B mixed brushes based on poly(methacrylic acid)/poly(2-vinylpyridine) (PMAA/P2VP) with a high grafting density of ∼1 chain/nm2 are grown by surface-initiated ATRP and NMP, respectively. Detailed morphological characterization of the PMAA/P2VP brushes in response to pH changes reveals a nanoporous morphology under conditions that maximize complex coacervate formation between oppositely charged brushes. The charge ratio between the A and B brushes is varied via the composition of the brushes to further study the morphology evolution. The effect of intimate contact between the A and B brushes on the morphology is probed by comparing with a mixed A/B PE system with random fluctuations in grafting composition. A quantitative and qualitative study of the pore evolution with pH as well as charge composition is presented using a combination of atomic force microscopy, water contact angle measurement, and image analysis using Gwyddion software. These studies demonstrate that the porous morphology is enhanced and most uniform when the brushes are grown from the Y-inimer, indicating that a 1:1 grafting ratio and intimate contact between A and B brushes are essential.

Development of Bilayer Polysaccharide-Based Films Combining Extrusion and Electrospinning for Active Food Packaging

The development of active food packaging is desirable for food safety and to avoid food loss and waste. In this work, we developed antioxidant bilayer films combining extrusion and electrospinning techniques. These films consisted of a first layer of thermoplastic cornstarch (TPS), incorporated with microcrystalline cellulose (MCC). The second layer consisted of gallic acid (GA) encapsulated at different concentrations in 1:1 chitosan/poly(ethylene-co-vinyl alcohol) (CS/EVOH) nanofibers. This layer was directly electrospun onto the TPS/MCC film. The morphological, structural, wettability, permeability to oxygen, and antioxidant properties were investigated for the first layer and the bilayer films. Water contact angle measurements revealed the hydrophobic nature of the first layer (θ0 = 100.6°). The oxygen permeability (OP) was accessed through the peroxide value (PV) of canola oil, kept in containers covered by the films. PV varied from 66.6 meq/kg for the TPS/MCC layer to 60.5 meq/kg for a bilayer film. Intermolecular hydrogen bonds, mediated by GA, contributed slightly to improving the mechanical strength of the bilayer films. The bilayer film incorporated with GA at 15.0% reached a radical scavenging activity against the DPPH radical of (903.8 ± 62.2) μmol.L−1.Eq. Trolox.g−1. This result proved the effectiveness of the GA nanoencapsulation strategy.

Hydrophilic 2D composite LDHs-MXene pervaporation membrane for highly efficient ethanol dehydration

Mixed matrix membranes (MMMs) demonstrate significant potential for pervaporation applications. Nevertheless, single lamella 2D materials are prone to stacking problems in membranes, resulting in unforeseen matrix inhomogeneity and defects. Here, we propose a wafer-like membrane structure designed for ethanol dehydration. This structure features a surface modification of transition metal carbides (MXenes) with layered dihydroxides (LDHs), which effectively enlarges the interlayer spacing and ameliorates the stacking issue. The LDHs-modified MXenes were then incorporated into the sodium alginate (SA) layer. The hydrophilicity, stability and morphology of the MMM were evaluated by water contact angle measurements, swelling tests and scanning electron microscopy. The experiment results indicated the hydrophilicity and stability of the MMM were effectively improved. The novel L-M@CS MMM exhibited outstanding dehydration performance for ethanol solution, with the membrane containing 0.4 wt % LDHs-modified MXenes achieving the highest permeation flux of 1377 g/(m2·h) and the optimal separation factor up to 1650.

Anti‐fouling capacity enhancement of thin‐film composite polyamide membrane by chitosan graft polymerization methods

AbstractThis study aimed to improve the anti‐fouling properties of a thin‐film composite polyamide membrane by modifying it with chitosan and acrylic acid using UV‐induced and Redox‐initiated graft polymerization methods. The modified membrane's separation performance was evaluated by measuring the flux and retention of sodium ions in water during filtration. The anti‐fouling capacities of the modified membranes were determined by measuring the maintained flux ratios and irreversible fouling factors during the 8‐h filtration of aqueous solutions of sodium chloride at different concentrations (1000 and 10,000 ppm). In addition, by evaluating the membrane's surface properties using various methods, including field emission scanning electron microscopy, attenuated total reflection – Fourier transform infrared spectroscopy, and water contact angle measurements, we have demonstrated the validity of the experimental results. Our results showed that the grafted membranes under UV irradiation or redox initiators had enhanced anti‐fouling properties while maintaining salt retention. The modified membranes fabricated by UV‐induced or Redox‐initiated technique had superior anti‐fouling capabilities, with irreversible fouling factors and maintained flux ratios of around 8% and 43%, respectively, after 8 h of filtration, compared to only 12% and 36% for the unmodified membrane. These findings suggest that the modified membranes have the potential for use in filtration systems to prevent the fouling phenomenon.

Improvement of biomedical properties of PEO-treated titanium with flurbiprofen and exosome conjugation

Exosome (EXO)-based drug delivery systems have attained a desirable position among scientific researchers and in biomedical applications. In this study, an exosomal coating comprising the anti-inflammatory drug flurbiprofen (FLB) was applied on a commercially pure titanium (cp-Ti) substrate that had undergone surface treatment using plasma electrolytic oxidation (PEO) process. The samples were characterized through field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), and water contact angle (WCA) measurement. The results indicated that FLB was loaded onto the EXO and the formation of FLB.EXO was confirmed by FTIR, XRD, AFM and FESEM. Furthermore, FLB.EXO system was treated on PEO-treated substrates and FLB.EXO@PEO system demonstrated a considerable degree of roughness (Ra= 51.16 nm) and exceptional WCA (37.2 ± 0.7 ̊) in comparison to the other samples. The cellular inquiries were assessed through examination of the morphology of bone marrow mesenchymal stem cells (BMMSc) and the MTT assay. The cytotoxicity assessment showed that the FLB.EXO@PEO improved BMMSCs attachment without toxicity. The antibacterial efficacy was determined by means of bacterial adhesion testing against both gram-positive Staphylococcus aureus (S. aureus) and gram-negative Escherichia coli (E. coli) bacterial strains. FLB.EXO@PEO sample also revealed an excellent antibacterial rate of ∼ 86 % against S. aureus and ∼ 55 % against E. coli. Additionally, in vitro drug release evaluations indicated that sustained drug release was occurred and FLB released from FLB.EXO@PEO during 191 h that was lower than release time in FLB.EXO (120 h). Moreover, the prolonged release was confirmed by constant release rate in both of systems of FLB.EXO and FLB.EXO@PEO after 191 h and 167 h, respectively. The release kinetic of FLB.EXO and FLB.EXO@PEO followed the zero order and first-order model, respectively. Overall, the results indicate that the designed sustained release system have a high potential for development of advanced biomedical implants.

Eco-Friendly Poly (Butylene Adipate-co-Terephthalate) Coated Bi-Layered Films: An Approach to Enhance Mechanical and Barrier Properties.

In this research work, a coated paper was prepared with poly (butylene adipate-co-terephthalate) (PBAT) film to explore its use in eco-friendly food packaging. The paper was coated with PBAT film for packaging using hot pressing, a production method currently employed in the packaging industry. The coated papers were evaluated for their structural, mechanical, thermal, and barrier properties. The structural morphology and chemical analysis of the coated paper confirmed the consistent formation of PBAT bi-layered on paper surfaces. Surface coating with PBAT film increased the water resistance of the paper samples, as demonstrated by tests of barrier characteristics, including the water vapor transmission rate (WVTR), oxygen transmission rate (OTR), and water contact angle (WCA) of water drops. The transmission rate of the clean paper was 2010.40 cc m-2 per 24 h for OTR and 110.24 g m-2 per 24 h for WVTR. If the PBAT-film was coated, the value decreased to 91.79 g m-2 per 24 h and 992.86 cc m-2 per 24 h. The hydrophobic nature of PBAT, confirmed by WCA measurements, contributed to the enhanced water resistance of PBAT-coated paper. This result presents an improved PBAT-coated paper material, eliminating the need for adhesives and allowing for the fabrication of bi-layered packaging.

Effect of core–sheath bi‐polymeric scaffolds fabricated from acid‐soluble collagen and poly(lactic acid) derivatives on wound healing

AbstractThe core–sheath bi‐polymeric scaffold has been proven as an encouraging material based on the requirement of scaffolds. This study aims to prepare electrospun core–sheath scaffolds by using acid‐soluble collagen (ASC) as core material and poly(lactic acid) (PLA) or PLA‐g‐VAc as sheath material to get the most in combination from a hydrophilic and a hydrophobic polymer. ASC is extracted from waste Tilapia fish skin conserving the triple helix structure of the α1 (130 kDa) chain, and a α2 (120 kDa) chain cross‐linked with the β (280 kDa) chain confirmed by amino acid profile, sodium dodecyl sulphate‐polyacrylamide gel electrophoresis. PLA‐g‐VAc is prepared by grafting vinyl acetate (VAc) onto the PLA chain using benzoyl peroxide as the initiator. FT‐IR, 1H NMR, and 13C NMR of PLA‐g‐VAc reveal that grafting occurs between the double bond of VAc and the methine group of PLA. The morphology of the scaffolds is determined by the field emission scanning electron microscope. FT‐IR, thermogravimetric analysis, differential scanning calorimetry, XRD, and water contact angle measurements are used for further characterization of scaffolds. In vivo, cytotoxicity analysis on the Vero cell line exposes that scaffolds are biocompatible. Application of scaffolds to the surgically produced wounding of skin in a rat model followed by histological assay indicates the enhanced properties of core–sheath scaffolds rather than the single polymeric scaffolds.

Physicochemical characterization of the fraction components of the theabrownin isolates from Pu'er tea

This study focuses on the isolation of theabrownins (TBs) from Pu'er tea. This isolation process involves low temperature water extraction, membrane separation, and multi-stage extraction with organic solvents. Subsequently, purification was performed using column chromatography with macroporous adsorbent resin D-101 and ethanol aqueous solution with a concentration of 0–64.81 g/100g. Five purified fractions were obtained, namely TBs-D1, TBs-D2, TBs-D3, TBs-D4, and TBs-D5, collectively referred to as TBs-D(1–5). These fractions were found to contain TBs and polysaccharides but lacked catechins, caffeine, theaflavin, and free protein. The average molecular weights of these fraction components exceeded 104 Da. These results indicated that TBs-D(1–5) were not free, but combined with tea polysaccharide conjugates (TPC), that is, TBs-TPC complexes. Furthermore, ultraviolet–visible spectrophotometry and Flourier transformation infrared spectroscopy confirmed the nature of TBs-D(1–5) as TBs-TPC complexes. Fluorescence spectra revealed that polysaccharides exert a quenching effect on the intrinsic fluorescence of TBs. Atomic force microscopy indicated that the sample forms a spherical cluster due to the aggregation of theabrownin molecules. Additionally, measurements of interfacial tension and water contact angle demonstrated that TBs-D(1–5) exhibit some amphiphilic properties. This research provides a theoretical foundation for the industrial production and utilization of TBs.

Experimental evaluation of atmospheric plasma treatment effects on different textures of CFRP composite for aircraft applications

This article examines the impact of Atmospheric Plasma Treatment (APL) on the chemical composition and fracture properties of various textured surfaces (tool and bag side) of carbon fiber/epoxy (CFRP) composites utilized in aircraft applications. For this purpose, parameters of atmospheric plasma (APL) surface treatment were evaluated in comparison to chemical cleaning and peel-ply applications, taking into account its effects on surface properties and adhesive bond strength. A comprehensive variety of surface characterization techniques were utilized to analyze surface modifications, including water and diiodomethane contact angle measurements for assessing surface hydrophilicity, Fourier Transform Infrared Spectroscopy with Attenuated Total Reflection (FTIR-ATR) and X-ray Photoelectron Spectroscopy (XPS) for analyzing chemical composition and functional groups, and Profilometry, Atomic Force Microscopy (AFM), and Scanning Electron Microscopy (SEM) for evaluating surface topography and morphology. Experimental results indicated that the reduction in the contact angle following plasma treatment correlated with the elevated oxygen concentration and the presence of polar functional groups (e.g. -OH, -NH2, -NH3, C=O, O-C=O) on the composite surface. Plasma treatment, especially at low nozzle speeds, increased surface roughness on the bag side surfaces. This prevented adhesive penetration and led to gas entrapment, resulting in adhesive failure mode and reduced single lap shear strength for the bag side. In contrast, on the tool side surfaces, the plasma treatment led to a remarkable 19.7% enhancement in shear strength, highlighting its effectiveness.

Rates of air flow in and out of closed atmospheric-pressure plasma jet system affected surface properties of treated polysulfone membrane

The cold plasma jet works in an atmospheric-pressure condition, and is used to modify polymer membranes by creating hydrophilic functional groups on the membrane surface. Since it can be used without a pressure-reducing system, treatment time and cost are reduced. However, the plasma jet has a narrow beam which limits the area of the membrane surface that can be activated. In this study, a plasma jet was generated in a closed system with controllable rates of air flow in and out of the system. The plasma discharge was recorded with a camera and analyzed by optical emission spectroscopy (OES). Polysulfone membrane surfaces were treated with various conditions of plasma discharge, and the induced membrane hydrophilicity was assessed from water contact angle (WCA) and surface energy (SE) measurements. Atomic force microscopy (AFM), Fourier Transform Infrared Spectroscopy (FTIR) and WCA contour mapping were respectively employed to study surface roughness, functional groups, and WCA distribution on the treated membrane surfaces. The airflow had distinctly different effects on the plasma characteristics. The inflow rate condition affected the width of the plasma beam, and the outflow rate condition affected the diffusion of the plasma beam. Water flux was changed according to the plasma characteristic, and an air outflow rate of 6L/min was the optimum condition for this experiment.

Microwave-plasma surface modification of nanostructured-polyaniline:graphite composite counter electrode in dye-sensitized solar cells

This work demonstrates microwave plasma surface modifications of nanostructured polyaniline (NPES)-based counter electrodes (CE). Oxidative oxygen (O2) plasma and reductive hydrogen (H2) plasma were used in this study. Optical emission spectra confirm the presence of reactive species in both plasmas through the emissive species, such as O2+, O+, O•, H(nl), and H2 Fulcher-α. Microwave plasma treatment does not affect the surface morphology of NPES composite CE, which conserves its granule nanostructures, as revealed by SEM. The water contact angle measurements demonstrate how the O2 plasma treatment improves surface hydrophilicity, contrary to the H2 plasma treatment. Raman spectroscopy results show significant changes in the intrinsic-oxidation state and the number of semiquinonoid species (SQ) of NPES after plasma treatments, which are represented by the ratios of Raman intensity at 1368–1260 cm−1 and 1624–1583 cm−1, respectively. Generally, O2 plasma treatment increases the intrinsic-oxidation state and SQ number, opposite to the H2 plasma. The optimum condition of microwave plasma-assisted surface modification was attained in one minute of O2 plasma treatment, producing NPES with the highest intrinsic-oxidation state and SQ number. A power conversion efficiency of 3.17 % was obtained by a dye-sensitized solar cell fabricated with a modified CE using a one-minute O2 plasma treatment.

Studying how changes in the structure caused by hydrogen bonding affect the corrosion resistance of polybenzoxazine-based coatings using molecular dynamics simulations

Polybenzoxazine (PBz) based coatings were prepared using designed PBz monomers for corrosion protection. The structure and properties of poly(MPM) and poly(POPM) coatings deriving from PBz monomer with methyl group and phenoxy group, respectively, were fully investigated by Fourier transform infrared spectroscopy, water contact angle measurements and electrochemical impedance spectroscopy. For the two crosslinking coating systems, the poly(POPM) coating, with a lower intermolecular hydrogen bonding ratio of 9.7 %, exhibited better hydrophobicity, stability, and corrosion resistance. This is evidenced by a water contact angle (WCA) exceeding 94° (90° for poly(MPM) system) and a charge-transfer resistance surpassing 1 GΩ cm2 (1 MΩ cm2 for poly(MPM) system) even after 30 days of immersion in a 3.5 wt% NaCl solution. The distinct performance in corrosion resistance performance between the two systems can be attributed to structural changes arising from hydrogen bonding, which were extensively investigated through solubility parameters calculation and molecular dynamics simulations in this study. The results show that the prevalence of intra‑hydrogen bonding in the poly(POPM) coating lead to a more compact structure and enhanced hydrophobicity against water, thereby enhancing the barrier ability of PBz based coatings against the penetration of corrosive substances.

Highly sensitive ratiometric fluorescent fiber matrices for oxygen sensing with micrometer spatial resolution

AbstractOxygen (O2)-sensing matrices are promising tools for the live monitoring of extracellular O2 consumption levels in long-term cell cultures. In this study, ratiometric O2-sensing membranes were prepared by electrospinning, an easy, low-cost, scalable, and robust method for fabricating nanofibers. Poly(ε-caprolactone) and poly(dimethyl)siloxane polymers were blended with tris(4,7-diphenyl-1,10-phenanthroline) ruthenium(II) dichloride, which was used as the O2-sensing probe, and rhodamine B isothiocyanate, which was used as the reference dye. The functionalized scaffolds were morphologically characterized by scanning electron microscopy, and their physicochemical profiles were obtained by Fourier transform infrared spectroscopy, thermogravimetric analysis, and water contact angle measurement. The sensing capabilities were investigated by confocal laser scanning microscopy, performing photobleaching, reversibility, and calibration curve studies toward different dissolved O2 (DO) concentrations. Electrospun sensing nanofibers showed a high response to changes in DO concentrations in the physiological-pathological range from 0.5 to 20% and good stability under ratiometric imaging. In addition, the sensing systems were highly biocompatible for cell growth promoting adhesiveness and growth of three cancer cell lines, namely metastatic melanoma cell line SK-MEL2, breast cancer cell line MCF-7, and pancreatic ductal adenocarcinoma cell line Panc-1, thus recreating a suitable biological environment in vitro. These O2-sensing biomaterials can potentially measure alterations in cell metabolism caused by changes in ambient O2 content during drug testing/validation and tissue regeneration processes. Graphic abstract

Engineering of electrospun polycaprolactone/polyvinyl alcohol-collagen based 3D nano scaffolds and their drug release kinetics using cetirizine as a model drug

Combining the versatility of electrospinning with the biocompatibility of Polycaprolactone and Collagen, this study aims to create advanced 3D nano scaffolds for effective drug delivery. Ceramic materials like hydroxyapatite (nHAp) are incorporated as bioactive agents in the fibers. Electrospun PCL (Polycaprolactone)/collagen nanofibers and PVA (Poly-vinyl alcohol)/collagen are promising tissue-engineering substitutes with high biocompatibility, low cytotoxicity, and great tensile strength. Small pores in these nanofibers play a major role in drug delivery system. Owing to its short half-life, limited solubility, restricted bioavailability as well as re-crystallization concerns, the application of Cetirizine (CIT) has found little relevance. Electrospun nanofibers impregnated with CIT provide an excellent solution to combat these limitations, yield sustained drug release along with hampering drug re-crystallization. CIT-loaded polyvinyl alcohol (PVA)/collagen (Col) and CIT-loaded PVA/Col/nHAp nanofibers were characterized and further CIT anti-crystallization as well as release behaviors were investigated. FESEM and HRTEM were used to observe the morphology of the as-synthesized nanofibers. FTIR spectroscopy, water contact angle measurement and drug release studies verified the differences in performance of CIT-loaded PVA/Col and PVA/Col/nHAp nanofibers. The release trend of CIT through these as-synthesized nanoscaffolds was analyzed by various kinetic models and exhibited sustained release of CIT for up to 96 h.

Leveraging tannic acid-ferric iron (TA/Fe3+) complexation in polyamide selective layer for synthesizing robust thin film composite reverse osmosis (TFC-RO) hollow fiber membranes for saline water treatment

The high efficiency and adaptability of reverse osmosis (RO) are two main reasons this separation technology is accepted worldwide, depending on its various uses, such as water purification, desalination, and concentration. The potential of RO can be enhanced by utilizing the hollow fiber (HF) mode, benefiting from higher packing density, ease of cleaning, and cost competitiveness. However, its suitability for RO applications becomes questionable due to its weaker and fragile mechanical resilience. To solve the abovementioned issue and improve the mechanical strength and burst/crush pressure, we propose optimizing the selective layer of the TFC-RO membrane using tannic acid complexation with FeCl3. The polyethersulfone (PES) support layer was initially fabricated to host the polyamide (PA) layer. Subsequently, the introduction of tannic acid-ferric chloride complexation was implemented as a sandwich layer between the aqueous and organic phase reactions to host a coherent and selective PA layer to further enhance its performance by controlling the kinetics of interfacial polymerization (IP). The surface morphology, physicochemical properties, and underlying reactions were analyzed using scanning electron microscopy (SEM), atomic force microscope (AFM), Fourier infrared spectroscopy (FTIR), x-ray photoelectron spectroscopy (XPS), and water contact angle measurements. The TFC-RO membrane M_TA0.2/Fe7.5 (7.5 mM FeCl3 & 0.2 wt% tannic acid) showed significant improvement in pure water permeance and salt rejection along with 7.23 MPa of burst pressure and 68.41 % strain, which proves superior elasticity and mechanical robustness because of PA TA/Fe3+ complexes formed during the IP. Moreover, the proposed facile tannic acid modification is effective and scalable. It significantly improves the mechanical efficacy of the HF TFC-RO membrane, solving a great problem for its commercial adaptability for RO applications and paving the way for smoother industrial translation for direct human factor applications.

Effects of cold plasma treatment on the biological performances of decellularized bovine pericardium extracellular matrix-based films for biomedical applications

Aim: Since decades, decellularized extracellular matrix (dECM)-derived materials have received worldwide attention as promising biomaterials for tissue engineering and biomedical applications. Soluble dECM is a versatile raw material that can be easily engineered into the desired shapes and structures. However, there are still some limitations restricting its use, including low hydrophilicity and smooth surfaces, which negatively influence cell adhesion/spreading. The objective of the present study was to investigate surface modification by nitrogen/hydrogen (N2/H2) low-pressure cold plasma treatment as a potential technique to improve the biological response of bovine pericardium dECM films. Methods: Bovine pericardium dECM was enzymatically digested and lyophilized prior to the preparation of thin films via solvent-casting method. Changes in surface properties after plasma treatment were investigated using water contact angle (WCA) and X-ray photoelectron spectroscopy (XPS) measurements. Immunofluorescence staining and resazurin assay for human dermal fibroblasts (HDFs) cultured on the dECM films were used to assess the bioactivity of dECM films. Finally, the hemocompatibility of the films was investigated via clotting time and hemolysis assay. Results: WCA and XPS results revealed that oxygen (O)- and N-containing functional groups were incorporated onto the film surface and an increase in hydrophilicity was observed after plasma treatment. In vitro experiments showed that cell adhesion in plasma-treated dECM films is much faster if compared to the untreated controls. Moreover, the fibroblast proliferation increased after plasma surface modifications. Finally, the hemocompatibility analysis results indicated a delayed blood clotting and no hemolytic effects for all the tested samples. Conclusions: These findings confirmed the potential of dECM as raw material for biocompatible thin films fabrication. Additionally, plasma surface treatment emerged as an eco-friendly and cost-effective strategy to enhance in vitro cell attachment and proliferation on dECM films, expanding their applications in biomedicine.

Saliva exposure reduces gingival keratinocyte growth on TiO2-coated titanium

Bioactive, nanoporous TiO2-coating has been shown to enhance cell attachment on titanium implant surface. The aim of this study was to evaluate, whether the saliva proteins affect the epithelial cell adhesion on TiO2-coated and non-coated titanium. Grade V titanium discs were polished. Half of the discs were provided with TiO2-coating produced in sol with polycondensation method. Half of the TiO2-coated and non-coated discs were treated with pasteurized saliva for 30 min. After saliva treatment, the total protein amounts on surfaces were measured. Next, the hydrophilicity of discs were measured with water contact angle measurements. Further, the gingival keratinocyte adhesion strength was measured after 2 and 6 h of cultivation using serial trypsinization. In addition, cell growth and proliferation were measured after 1, 3, and 7 days of cell culture. Finally, cell morphology, spreading and adhesion protein signals were detected with high resolution confocal microscopy. As a result, in sol coated TiO2-surface had significantly higher hydrophilicity when compared to non-coated titanium, meanwhile both non-coated and TiO2-coated surfaces with saliva treatment had a significant increase in hydrophilicity. Importantly, the amounts of adhered saliva proteins were equal between TiO2-coated and non-coated surfaces. Adhesion strength against enzymatic detachment was weakest on non-coated titanium after saliva exposure. Cell proliferation and cell spreading were highest on TiO2-coated titanium, but saliva exposure significantly decreased cell proliferation and spreading on TiO2-coated surface. To conclude, even though saliva exposure makes titanium surfaces more hydrophilic, it seems to neutralize the bioactive TiO2-coating and decrease cell attachment to TiO2-coated surface.Graphical